This job view page is being replaced by Spyglass soon. Check out the new job view.
ResultFAILURE
Tests 0 failed / 0 succeeded
Started2019-07-29 22:12
Elapsed8m44s
Revision
Buildergke-prow-ssd-pool-1a225945-n4mt
Refs master:d57763ed
358:3df999af
podc42273d3-b24d-11e9-a9e2-7e889f96e8fd
infra-commitb84ad0850
podc42273d3-b24d-11e9-a9e2-7e889f96e8fd
reposigs.k8s.io/gcp-compute-persistent-disk-csi-driver
repo-commit5a6e452663b83a986944f62cb66aa8991f769c5f
repos{u'sigs.k8s.io/gcp-compute-persistent-disk-csi-driver': u'master:d57763ede618b611ff27749f6ba62a957e19122c,358:3df999af875870f4aba87b19f7c066ec732ed6f7'}

No Test Failures!


Error lines from build-log.txt

... skipping 67 lines ...
I0729 22:13:41.766] I0729 22:13:41.765955    5140 utils.go:133] Using project k8s-gce-soak-1-5 and service account 858465980138-compute@developer.gserviceaccount.com
I0729 22:13:41.768] I0729 22:13:41.767043    5140 setup_e2e_test.go:84] Running in project k8s-gce-soak-1-5 with service account 858465980138-compute@developer.gserviceaccount.com
I0729 22:13:41.768] 
I0729 22:13:41.769] I0729 22:13:41.767157    5140 setup_e2e_test.go:90] Setting up node gce-pd-csi-e2e-us-central1-b
I0729 22:13:41.769] I0729 22:13:41.767299    5140 setup_e2e_test.go:90] Setting up node gce-pd-csi-e2e-us-central1-c
I0729 22:13:58.982] W0729 22:13:58.981938    5140 instance.go:161] instance gce-pd-csi-e2e-us-central1-b not in state RUNNING, was STAGING
I0729 22:14:09.315] W0729 22:14:09.314756    5140 instance.go:172] SSH encountered an error: Instance gce-pd-csi-e2e-us-central1-c in state RUNNING but not available by SSH: command [ssh -o UserKnownHostsFile=/dev/null -o IdentitiesOnly=yes -o CheckHostIP=no -o StrictHostKeyChecking=no -o ServerAliveInterval=30 -o LogLevel=ERROR -i /etc/ssh-key-secret/ssh-private prow@35.239.1.102 -o ConnectTimeout=10 -- echo] failed with error: exit status 255, output: ssh: connect to host 35.239.1.102 port 22: Connection timed out

I0729 22:14:23.845] W0729 22:14:23.845063    5140 instance.go:172] SSH encountered an error: Instance gce-pd-csi-e2e-us-central1-b in state RUNNING but not available by SSH: command [ssh -o UserKnownHostsFile=/dev/null -o IdentitiesOnly=yes -o CheckHostIP=no -o StrictHostKeyChecking=no -o ServerAliveInterval=30 -o LogLevel=ERROR -i /etc/ssh-key-secret/ssh-private prow@35.188.107.171 -o ConnectTimeout=10 -- echo] failed with error: exit status 255, output: ssh: connect to host 35.188.107.171 port 22: Connection timed out

I0729 22:14:24.303] W0729 22:14:24.303219    5140 instance.go:172] SSH encountered an error: Instance gce-pd-csi-e2e-us-central1-c in state RUNNING but not available by SSH: command [ssh -o UserKnownHostsFile=/dev/null -o IdentitiesOnly=yes -o CheckHostIP=no -o StrictHostKeyChecking=no -o ServerAliveInterval=30 -o LogLevel=ERROR -i /etc/ssh-key-secret/ssh-private prow@35.239.1.102 -o ConnectTimeout=10 -- echo] failed with error: exit status 255, output: ssh: connect to host 35.239.1.102 port 22: Connection timed out

I0729 22:14:38.828] W0729 22:14:38.827479    5140 instance.go:172] SSH encountered an error: Instance gce-pd-csi-e2e-us-central1-b in state RUNNING but not available by SSH: command [ssh -o UserKnownHostsFile=/dev/null -o IdentitiesOnly=yes -o CheckHostIP=no -o StrictHostKeyChecking=no -o ServerAliveInterval=30 -o LogLevel=ERROR -i /etc/ssh-key-secret/ssh-private prow@35.188.107.171 -o ConnectTimeout=10 -- echo] failed with error: exit status 255, output: ssh: connect to host 35.188.107.171 port 22: Connection timed out

I0729 22:14:39.330] W0729 22:14:39.330109    5140 instance.go:172] SSH encountered an error: Instance gce-pd-csi-e2e-us-central1-c in state RUNNING but not available by SSH: command [ssh -o UserKnownHostsFile=/dev/null -o IdentitiesOnly=yes -o CheckHostIP=no -o StrictHostKeyChecking=no -o ServerAliveInterval=30 -o LogLevel=ERROR -i /etc/ssh-key-secret/ssh-private prow@35.239.1.102 -o ConnectTimeout=10 -- echo] failed with error: exit status 255, output: ssh: connect to host 35.239.1.102 port 22: Connection timed out

I0729 22:14:53.986] W0729 22:14:53.985628    5140 instance.go:172] SSH encountered an error: Instance gce-pd-csi-e2e-us-central1-b in state RUNNING but not available by SSH: command [ssh -o UserKnownHostsFile=/dev/null -o IdentitiesOnly=yes -o CheckHostIP=no -o StrictHostKeyChecking=no -o ServerAliveInterval=30 -o LogLevel=ERROR -i /etc/ssh-key-secret/ssh-private prow@35.188.107.171 -o ConnectTimeout=10 -- echo] failed with error: exit status 255, output: ssh: connect to host 35.188.107.171 port 22: Connection timed out

I0729 22:14:54.456] W0729 22:14:54.455346    5140 instance.go:172] SSH encountered an error: Instance gce-pd-csi-e2e-us-central1-c in state RUNNING but not available by SSH: command [ssh -o UserKnownHostsFile=/dev/null -o IdentitiesOnly=yes -o CheckHostIP=no -o StrictHostKeyChecking=no -o ServerAliveInterval=30 -o LogLevel=ERROR -i /etc/ssh-key-secret/ssh-private prow@35.239.1.102 -o ConnectTimeout=10 -- echo] failed with error: exit status 255, output: ssh: connect to host 35.239.1.102 port 22: Connection timed out

I0729 22:15:00.037] I0729 22:15:00.037456    5140 setup_e2e_test.go:97] Creating new driver and client for node gce-pd-csi-e2e-us-central1-b
I0729 22:15:00.409] I0729 22:15:00.409076    5140 setup_e2e_test.go:97] Creating new driver and client for node gce-pd-csi-e2e-us-central1-c
I0729 22:15:18.895] I0729 22:15:18.894921    5140 setup_e2e_test.go:109] Test Context for node gce-pd-csi-e2e-us-central1-b set up
I0729 22:15:18.921] I0729 22:15:18.920624    5140 setup_e2e_test.go:109] Test Context for node gce-pd-csi-e2e-us-central1-c set up
I0729 22:15:56.274] • [SLOW TEST:37.353 seconds]
I0729 22:15:56.274] GCE PD CSI Driver
... skipping 60 lines ...
I0729 22:19:20.912] • Failure [0.125 seconds]
I0729 22:19:20.912] GCE PD CSI Driver
I0729 22:19:20.912] /go/src/sigs.k8s.io/gcp-compute-persistent-disk-csi-driver/test/e2e/tests/single_zone_e2e_test.go:48
I0729 22:19:20.912]   Should create CMEK key, go through volume lifecycle, validate behavior on key revoke and restore [It]
I0729 22:19:20.912]   /go/src/sigs.k8s.io/gcp-compute-persistent-disk-csi-driver/test/e2e/tests/single_zone_e2e_test.go:315
I0729 22:19:20.913] 
I0729 22:19:20.913]   Failed to create or get key ring gce-pd-csi-test-ring
I0729 22:19:20.913]   Expected
I0729 22:19:20.913]       <*status.statusError | 0xc00021a0f0>: {
I0729 22:19:20.913]           Code: 9,
I0729 22:19:20.913]           Message: "Google Cloud KMS API has not been used in this project before, or it is disabled. Enable it by visiting https://console.developers.google.com/apis/api/cloudkms.googleapis.com/overview?project=858465980138 then retry. If you enabled this API recently, wait a few minutes for the action to propagate to our systems and retry.",
I0729 22:19:20.913]           Details: nil,
I0729 22:19:20.913]           XXX_NoUnkeyedLiteral: {},
... skipping 23 lines ...
I0729 22:20:46.197]   /go/src/sigs.k8s.io/gcp-compute-persistent-disk-csi-driver/test/e2e/tests/multi_zone_e2e_test.go:60
I0729 22:20:46.197] ------------------------------
I0729 22:20:47.607] 
I0729 22:20:47.608] 
I0729 22:20:47.608] Summarizing 1 Failure:
I0729 22:20:47.608] 
I0729 22:20:47.608] [Fail] GCE PD CSI Driver [It] Should create CMEK key, go through volume lifecycle, validate behavior on key revoke and restore 
I0729 22:20:47.608] /go/src/sigs.k8s.io/gcp-compute-persistent-disk-csi-driver/test/e2e/tests/single_zone_e2e_test.go:343
I0729 22:20:47.608] 
I0729 22:20:47.608] Ran 14 of 14 Specs in 486.575 seconds
I0729 22:20:47.608] FAIL! -- 13 Passed | 1 Failed | 0 Pending | 0 Skipped
I0729 22:20:47.609] --- FAIL: TestE2E (486.58s)
I0729 22:20:47.609] FAIL
I0729 22:20:47.614] FAIL	sigs.k8s.io/gcp-compute-persistent-disk-csi-driver/test/e2e/tests	486.595s
W0729 22:20:47.753] Traceback (most recent call last):
W0729 22:20:47.753]   File "/workspace/./test-infra/jenkins/../scenarios/execute.py", line 50, in <module>
W0729 22:20:47.754]     main(ARGS.env, ARGS.cmd + ARGS.args)
W0729 22:20:47.754]   File "/workspace/./test-infra/jenkins/../scenarios/execute.py", line 41, in main
W0729 22:20:47.754]     check(*cmd)
W0729 22:20:47.754]   File "/workspace/./test-infra/jenkins/../scenarios/execute.py", line 30, in check
W0729 22:20:47.754]     subprocess.check_call(cmd)
W0729 22:20:47.754]   File "/usr/lib/python2.7/subprocess.py", line 186, in check_call
W0729 22:20:47.754]     raise CalledProcessError(retcode, cmd)
W0729 22:20:47.754] subprocess.CalledProcessError: Command '('test/run-e2e.sh',)' returned non-zero exit status 1
E0729 22:20:47.759] Command failed
I0729 22:20:47.760] process 437 exited with code 1 after 8.5m
E0729 22:20:47.760] FAIL: pull-gcp-compute-persistent-disk-csi-driver-e2e
I0729 22:20:47.760] Call:  gcloud auth activate-service-account --key-file=/etc/service-account/service-account.json
W0729 22:20:48.237] Activated service account credentials for: [pr-kubekins@kubernetes-jenkins-pull.iam.gserviceaccount.com]
I0729 22:20:48.303] process 5591 exited with code 0 after 0.0m
I0729 22:20:48.303] Call:  gcloud config get-value account
I0729 22:20:48.630] process 5602 exited with code 0 after 0.0m
I0729 22:20:48.631] Will upload results to gs://kubernetes-jenkins/pr-logs using pr-kubekins@kubernetes-jenkins-pull.iam.gserviceaccount.com
... skipping 27 lines ...