This job view page is being replaced by Spyglass soon. Check out the new job view.
PRcpanato: cross: install ip looks like it is not there for bullseye
ResultABORTED
Tests 0 failed / 0 succeeded
Started2021-09-21 10:23
Elapsed44m39s
Revision6df407ad2aed21ebd8b01f5b6b85385df84c525d
Refs 2260

No Test Failures!


Error lines from build-log.txt

... skipping 158 lines ...
Setting /usr/bin/qemu-riscv64-static as binfmt interpreter for riscv64
Setting /usr/bin/qemu-xtensa-static as binfmt interpreter for xtensa
Setting /usr/bin/qemu-xtensaeb-static as binfmt interpreter for xtensaeb
Setting /usr/bin/qemu-microblaze-static as binfmt interpreter for microblaze
Setting /usr/bin/qemu-microblazeel-static as binfmt interpreter for microblazeel
Setting /usr/bin/qemu-or1k-static as binfmt interpreter for or1k
error: no builder "k-release-multiarch" found
k-release-multiarch
#1 [internal] booting buildkit
#1 pulling image moby/buildkit:buildx-stable-1
#1 pulling image moby/buildkit:buildx-stable-1 2.7s done
#1 creating container buildx_buildkit_k-release-multiarch0
#1 creating container buildx_buildkit_k-release-multiarch0 1.9s done
... skipping 151 lines ...
Setting /usr/bin/qemu-riscv64-static as binfmt interpreter for riscv64
Setting /usr/bin/qemu-xtensa-static as binfmt interpreter for xtensa
Setting /usr/bin/qemu-xtensaeb-static as binfmt interpreter for xtensaeb
Setting /usr/bin/qemu-microblaze-static as binfmt interpreter for microblaze
Setting /usr/bin/qemu-microblazeel-static as binfmt interpreter for microblazeel
Setting /usr/bin/qemu-or1k-static as binfmt interpreter for or1k
error: no builder "k-release-multiarch" found
k-release-multiarch
#1 [internal] booting buildkit
#1 pulling image moby/buildkit:buildx-stable-1
#1 pulling image moby/buildkit:buildx-stable-1 2.8s done
#1 creating container buildx_buildkit_k-release-multiarch0
#1 creating container buildx_buildkit_k-release-multiarch0 2.2s done
... skipping 153 lines ...
Setting /usr/bin/qemu-riscv64-static as binfmt interpreter for riscv64
Setting /usr/bin/qemu-xtensa-static as binfmt interpreter for xtensa
Setting /usr/bin/qemu-xtensaeb-static as binfmt interpreter for xtensaeb
Setting /usr/bin/qemu-microblaze-static as binfmt interpreter for microblaze
Setting /usr/bin/qemu-microblazeel-static as binfmt interpreter for microblazeel
Setting /usr/bin/qemu-or1k-static as binfmt interpreter for or1k
error: no builder "k-release-multiarch" found
k-release-multiarch
#1 [internal] booting buildkit
#1 pulling image moby/buildkit:buildx-stable-1
#1 pulling image moby/buildkit:buildx-stable-1 2.6s done
#1 creating container buildx_buildkit_k-release-multiarch0
#1 creating container buildx_buildkit_k-release-multiarch0 2.1s done
... skipping 151 lines ...
Setting /usr/bin/qemu-riscv64-static as binfmt interpreter for riscv64
Setting /usr/bin/qemu-xtensa-static as binfmt interpreter for xtensa
Setting /usr/bin/qemu-xtensaeb-static as binfmt interpreter for xtensaeb
Setting /usr/bin/qemu-microblaze-static as binfmt interpreter for microblaze
Setting /usr/bin/qemu-microblazeel-static as binfmt interpreter for microblazeel
Setting /usr/bin/qemu-or1k-static as binfmt interpreter for or1k
error: no builder "k-release-multiarch" found
k-release-multiarch
#1 [internal] booting buildkit
#1 pulling image moby/buildkit:buildx-stable-1
#1 pulling image moby/buildkit:buildx-stable-1 2.6s done
#1 creating container buildx_buildkit_k-release-multiarch0
#1 creating container buildx_buildkit_k-release-multiarch0 2.2s done
... skipping 153 lines ...
Setting /usr/bin/qemu-riscv64-static as binfmt interpreter for riscv64
Setting /usr/bin/qemu-xtensa-static as binfmt interpreter for xtensa
Setting /usr/bin/qemu-xtensaeb-static as binfmt interpreter for xtensaeb
Setting /usr/bin/qemu-microblaze-static as binfmt interpreter for microblaze
Setting /usr/bin/qemu-microblazeel-static as binfmt interpreter for microblazeel
Setting /usr/bin/qemu-or1k-static as binfmt interpreter for or1k
error: no builder "k-release-multiarch" found
k-release-multiarch
#1 [internal] booting buildkit
#1 pulling image moby/buildkit:buildx-stable-1
#1 pulling image moby/buildkit:buildx-stable-1 3.0s done
#1 creating container buildx_buildkit_k-release-multiarch0
#1 creating container buildx_buildkit_k-release-multiarch0 2.1s done
... skipping 7034 lines ...
afa3e488a0ee: Layer already exists
v20210921-v0.11.0-33-g5d48e656-go1.15-buster-legacy: digest: sha256:22975a4697d18f3c484a79ee61a81c84858c014d174a8a25e2416806bfbea457 size: 3486
Pushing gcr.io/k8s-staging-releng-test/kube-cross-amd64:latest-go1.15-buster-legacy
INFO: Display format: "
        table(
          id,
          createTime.date('%Y-%m-%dT%H:%M:%S%Oz', undefined='-'),
          duration(start=startTime,end=finishTime,precision=0,calendar=false,undefined="  -").slice(2:).join(""):label=DURATION,
          build_source(undefined="-"):label=SOURCE,
          build_images(undefined="-"):label=IMAGES,
          status
        )
      "
The push refers to repository [gcr.io/k8s-staging-releng-test/kube-cross-amd64]
7823898a2f41: Preparing
7416a8afebdb: Preparing
... skipping 185 lines ...
#5 6.340 Get:4 http://security.debian.org/debian-security buster/updates/main arm64 Packages [299 kB]
#5 13.06 Get:5 http://deb.debian.org/debian buster/main arm64 Packages [7735 kB]
#5 23.82 Get:6 http://deb.debian.org/debian buster-updates/main arm64 Packages [14.5 kB]
#5 26.08 Fetched 8289 kB in 25s (329 kB/s)
#5 26.08 Reading package lists...
#5 61.12 debconf: delaying package configuration, since apt-utils is not installed
#5 61.80 Error while loading /usr/sbin/dpkg-split: No such file or directory

#5 61.81 Error while loading /usr/sbin/dpkg-deb: No such file or directory

#5 61.81 dpkg: error processing archive /tmp/apt-dpkg-install-yCnqUi/00-libapt-inst2.0_1.8.2.3_arm64.deb (--unpack):

#5 61.81  dpkg-deb --control subprocess returned error exit status 1

#5 61.82 Error while loading /usr/sbin/dpkg-split: No such file or directory

#5 61.83 Error while loading /usr/sbin/dpkg-deb: No such file or directory

#5 61.83 dpkg: error processing archive /tmp/apt-dpkg-install-yCnqUi/01-apt-utils_1.8.2.3_arm64.deb (--unpack):

#5 61.83  dpkg-deb --control subprocess returned error exit status 1

#5 61.83 Error while loading /usr/sbin/dpkg-split: No such file or directory

#5 61.84 Error while loading /usr/sbin/dpkg-deb: No such file or directory

#5 61.84 dpkg: error processing archive /tmp/apt-dpkg-install-yCnqUi/02-libmagic-mgc_1%3a5.35-4+deb10u2_arm64.deb (--unpack):

#5 61.84  dpkg-deb --control subprocess returned error exit status 1

#5 61.84 Error while loading /usr/sbin/dpkg-split: No such file or directory

#5 61.85 Error while loading /usr/sbin/dpkg-deb: No such file or directory

#5 61.85 dpkg: error processing archive /tmp/apt-dpkg-install-yCnqUi/03-libmagic1_1%3a5.35-4+deb10u2_arm64.deb (--unpack):

#5 61.85  dpkg-deb --control subprocess returned error exit status 1

#5 61.85 Error while loading /usr/sbin/dpkg-split: No such file or directory

#5 61.86 Error while loading /usr/sbin/dpkg-deb: No such file or directory

#5 61.86 dpkg: error processing archive /tmp/apt-dpkg-install-yCnqUi/04-file_1%3a5.35-4+deb10u2_arm64.deb (--unpack):

#5 61.86  dpkg-deb --control subprocess returned error exit status 1

#5 61.86 Error while loading /usr/sbin/dpkg-split: No such file or directory

#5 61.87 Error while loading /usr/sbin/dpkg-deb: No such file or directory

#5 61.87 dpkg: error processing archive /tmp/apt-dpkg-install-yCnqUi/05-libonig5_6.9.1-1_arm64.deb (--unpack):

#5 61.87  dpkg-deb --control subprocess returned error exit status 1

#5 61.87 Error while loading /usr/sbin/dpkg-split: No such file or directory

#5 61.88 Error while loading /usr/sbin/dpkg-deb: No such file or directory

#5 61.88 dpkg: error processing archive /tmp/apt-dpkg-install-yCnqUi/06-libjq1_1.5+dfsg-2+b1_arm64.deb (--unpack):

#5 61.88  dpkg-deb --control subprocess returned error exit status 1

#5 61.88 Error while loading /usr/sbin/dpkg-split: No such file or directory

#5 61.89 Error while loading /usr/sbin/dpkg-deb: No such file or directory

#5 61.89 dpkg: error processing archive /tmp/apt-dpkg-install-yCnqUi/07-jq_1.5+dfsg-2+b1_arm64.deb (--unpack):

#5 61.89  dpkg-deb --control subprocess returned error exit status 1

#5 61.89 Error while loading /usr/sbin/dpkg-split: No such file or directory

#5 61.90 Error while loading /usr/sbin/dpkg-deb: No such file or directory

#5 61.90 dpkg: error processing archive /tmp/apt-dpkg-install-yCnqUi/08-libpopt0_1.16-12_arm64.deb (--unpack):

#5 61.90  dpkg-deb --control subprocess returned error exit status 1

#5 61.90 Error while loading /usr/sbin/dpkg-split: No such file or directory

#5 61.91 Error while loading /usr/sbin/dpkg-deb: No such file or directory

#5 61.91 dpkg: error processing archive /tmp/apt-dpkg-install-yCnqUi/09-patch_2.7.6-3+deb10u1_arm64.deb (--unpack):

#5 61.91  dpkg-deb --control subprocess returned error exit status 1

#5 62.04 Error while loading /usr/sbin/dpkg-split: No such file or directory

#5 62.05 Error while loading /usr/sbin/dpkg-deb: No such file or directory

#5 62.05 dpkg: error processing archive /tmp/apt-dpkg-install-yCnqUi/10-rsync_3.1.3-6_arm64.deb (--unpack):

#5 62.05  dpkg-deb --control subprocess returned error exit status 1

#5 62.05 Error while loading /usr/sbin/dpkg-split: No such file or directory

#5 62.06 Error while loading /usr/sbin/dpkg-deb: No such file or directory

#5 62.06 dpkg: error processing archive /tmp/apt-dpkg-install-yCnqUi/11-unzip_6.0-23+deb10u2_arm64.deb (--unpack):

#5 62.06  dpkg-deb --control subprocess returned error exit status 1

#5 62.12 Errors were encountered while processing:
#5 62.13  /tmp/apt-dpkg-install-yCnqUi/00-libapt-inst2.0_1.8.2.3_arm64.deb
#5 62.13  /tmp/apt-dpkg-install-yCnqUi/01-apt-utils_1.8.2.3_arm64.deb
#5 62.13  /tmp/apt-dpkg-install-yCnqUi/02-libmagic-mgc_1%3a5.35-4+deb10u2_arm64.deb
#5 62.13  /tmp/apt-dpkg-install-yCnqUi/03-libmagic1_1%3a5.35-4+deb10u2_arm64.deb
#5 62.13  /tmp/apt-dpkg-install-yCnqUi/04-file_1%3a5.35-4+deb10u2_arm64.deb
#5 62.13  /tmp/apt-dpkg-install-yCnqUi/05-libonig5_6.9.1-1_arm64.deb
#5 62.13  /tmp/apt-dpkg-install-yCnqUi/06-libjq1_1.5+dfsg-2+b1_arm64.deb
#5 62.13  /tmp/apt-dpkg-install-yCnqUi/07-jq_1.5+dfsg-2+b1_arm64.deb
#5 62.13  /tmp/apt-dpkg-install-yCnqUi/08-libpopt0_1.16-12_arm64.deb
#5 62.13  /tmp/apt-dpkg-install-yCnqUi/09-patch_2.7.6-3+deb10u1_arm64.deb
#5 62.13  /tmp/apt-dpkg-install-yCnqUi/10-rsync_3.1.3-6_arm64.deb
#5 62.13  /tmp/apt-dpkg-install-yCnqUi/11-unzip_6.0-23+deb10u2_arm64.deb
#5 62.36 E: Sub-process /usr/bin/dpkg returned an error code (1)
#5 ERROR: process "/dev/.buildkit_qemu_emulator /bin/sh -c apt-get -q update     && apt-get install -qqy         apt-utils         file         jq         patch         rsync         unzip         iproute2" did not complete successfully: exit code: 100
------
 > [3/9] RUN apt-get -q update     && apt-get install -qqy         apt-utils         file         jq         patch         rsync         unzip         iproute2:
#5 62.13  /tmp/apt-dpkg-install-yCnqUi/03-libmagic1_1%3a5.35-4+deb10u2_arm64.deb
#5 62.13  /tmp/apt-dpkg-install-yCnqUi/04-file_1%3a5.35-4+deb10u2_arm64.deb
#5 62.13  /tmp/apt-dpkg-install-yCnqUi/05-libonig5_6.9.1-1_arm64.deb
#5 62.13  /tmp/apt-dpkg-install-yCnqUi/06-libjq1_1.5+dfsg-2+b1_arm64.deb
#5 62.13  /tmp/apt-dpkg-install-yCnqUi/07-jq_1.5+dfsg-2+b1_arm64.deb
#5 62.13  /tmp/apt-dpkg-install-yCnqUi/08-libpopt0_1.16-12_arm64.deb
#5 62.13  /tmp/apt-dpkg-install-yCnqUi/09-patch_2.7.6-3+deb10u1_arm64.deb
#5 62.13  /tmp/apt-dpkg-install-yCnqUi/10-rsync_3.1.3-6_arm64.deb
#5 62.13  /tmp/apt-dpkg-install-yCnqUi/11-unzip_6.0-23+deb10u2_arm64.deb
#5 62.36 E: Sub-process /usr/bin/dpkg returned an error code (1)
------
Dockerfile:52
--------------------
  51 |     # Install packages
  52 | >>> RUN apt-get -q update \
  53 | >>>     && apt-get install -qqy \
... skipping 3 lines ...
  57 | >>>         patch \
  58 | >>>         rsync \
  59 | >>>         unzip \
  60 | >>>         iproute2
  61 |     
--------------------
error: failed to solve: process "/dev/.buildkit_qemu_emulator /bin/sh -c apt-get -q update     && apt-get install -qqy         apt-utils         file         jq         patch         rsync         unzip         iproute2" did not complete successfully: exit code: 100
Starting build for linux/ppc64le platform
#1 [internal] load build definition from Dockerfile
#1 transferring dockerfile: 4.06kB done
#1 DONE 0.0s

#2 [internal] load .dockerignore
... skipping 517 lines ...
#8 92.12 Get:5 http://deb.debian.org/debian buster/main ppc64el libfakeroot ppc64el 1.23-1 [43.1 kB]
#8 92.13 Get:6 http://deb.debian.org/debian buster/main ppc64el fakeroot ppc64el 1.23-1 [87.0 kB]
#8 92.13 Get:7 http://deb.debian.org/debian buster/main ppc64el libalgorithm-diff-perl all 1.19.03-2 [47.9 kB]
#8 92.13 Get:8 http://deb.debian.org/debian buster/main ppc64el libalgorithm-diff-xs-perl ppc64el 0.04-5+b1 [12.1 kB]
#8 92.13 Get:9 http://deb.debian.org/debian buster/main ppc64el libalgorithm-merge-perl all 0.08-3 [12.7 kB]
#8 109.0 Fetched 2219 kB in 0s (5770 kB/s)
ERROR: (gcloud.builds.submit) build 5d7268a4-6e27-4895-81cf-769111b24401 completed with status "FAILURE"
#8 109.5 Selecting previously unselected package bzip2.
#8 109.5 (Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 15637 files and directories currently installed.)
#8 109.6 Preparing to unpack .../0-bzip2_1.0.6-9.2~deb10u1_ppc64el.deb ...
#8 109.6 Unpacking bzip2 (1.0.6-9.2~deb10u1) ...
#8 110.1 Selecting previously unselected package xz-utils.
#8 110.2 Preparing to unpack .../1-xz-utils_5.2.4-1_ppc64el.deb ...
... skipping 106 lines ...
#10 [7/9] RUN mkdir /tmp.k8s   && chmod a+rwx /tmp.k8s   && chmod o+t /tmp.k8s
#10 DONE 0.4s

#11 [8/9] RUN go get golang.org/x/tools/cmd/cover            golang.org/x/tools/cmd/goimports     && go clean -cache
#11 11.23 go get: module golang.org/x/tools/cmd/cover: Get "https://proxy.golang.org/golang.org/x/tools/cmd/cover/@v/list": net/http: TLS handshake timeout
#11 11.23 go get golang.org/x/tools/cmd/goimports: module golang.org/x/tools: Get "https://proxy.golang.org/golang.org/x/tools/@v/list": net/http: TLS handshake timeout
#11 ERROR: process "/bin/sh -c go get golang.org/x/tools/cmd/cover            golang.org/x/tools/cmd/goimports     && go clean -cache" did not complete successfully: exit code: 1
------
 > [8/9] RUN go get golang.org/x/tools/cmd/cover            golang.org/x/tools/cmd/goimports     && go clean -cache:
#11 11.23 go get: module golang.org/x/tools/cmd/cover: Get "https://proxy.golang.org/golang.org/x/tools/cmd/cover/@v/list": net/http: TLS handshake timeout
#11 11.23 go get golang.org/x/tools/cmd/goimports: module golang.org/x/tools: Get "https://proxy.golang.org/golang.org/x/tools/@v/list": net/http: TLS handshake timeout
------
Dockerfile:106
--------------------
 105 |     # Get the code coverage tool and goimports
 106 | >>> RUN go get golang.org/x/tools/cmd/cover \
 107 | >>>            golang.org/x/tools/cmd/goimports \
 108 | >>>     && go clean -cache
 109 |     
--------------------
error: failed to solve: process "/bin/sh -c go get golang.org/x/tools/cmd/cover            golang.org/x/tools/cmd/goimports     && go clean -cache" did not complete successfully: exit code: 1
make: *** [Makefile:77: container] Error 1
ERROR
ERROR: build step 0 "gcr.io/k8s-testimages/gcb-docker-gcloud:v20210722-085d930" failed: step exited with non-zero status: 2
--------------------------------------------------------------------------------
2021/09/21 10:47:05 Job "v1.21-go1.16-buster" failed: error running [gcloud builds submit --verbosity info --config /home/prow/go/src/k8s.io/release/images/build/cross/cloudbuild.yaml --substitutions _REGISTRY=gcr.io/k8s-staging-releng-test,_GO_VERSION=1.16.8,_IMAGE_VERSION=v1.21.0-go1.16.8-buster.0,_OS_CODENAME=buster,_PROTOBUF_VERSION=3.7.0,_TYPE=default,_KUBERNETES_VERSION=v1.21.0,_REVISION=0,_CONFIG=go1.16-buster,_GO_MAJOR_VERSION=1.16,_GIT_TAG=v20210921-v0.11.0-33-g5d48e656 --project k8s-staging-releng-test --gcs-log-dir gs://k8s-staging-releng-test/logs --gcs-source-staging-dir gs://k8s-staging-releng-test/source gs://k8s-staging-releng-test/source/4f07a0ad-3199-460e-801c-7e7653cc72dc.tgz]: &{%!w(*os.ProcessState=&{43 256 0xc0001f0240}) []}
#6 56.78 Selecting previously unselected package libapt-inst2.0:arm64.
#6 56.78 (Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 15394 files and directories currently installed.)
#6 56.83 Preparing to unpack .../00-libapt-inst2.0_1.8.2.3_arm64.deb ...
#6 56.85 Unpacking libapt-inst2.0:arm64 (1.8.2.3) ...
#6 57.52 Selecting previously unselected package apt-utils.
#6 57.53 Preparing to unpack .../01-apt-utils_1.8.2.3_arm64.deb ...
... skipping 719 lines ...

#7 [4/9] RUN targetArch=$(echo linux/ppc64le | cut -f2 -d '/')   && if [ ${targetArch} = "amd64" ]; then     echo "deb http://archive.ubuntu.com/ubuntu xenial main universe" > /etc/apt/sources.list.d/cgocrosscompiling.list     && apt-key adv --no-tty --keyserver keyserver.ubuntu.com --recv-keys 40976EAF437D05B5 3B4FE6ACC0B21F32     && apt-get update     && apt-get install -y build-essential mingw-w64     && for platform in arm64   armhf   i386   ppc64el   s390x; do apt-get install -y crossbuild-essential-${platform}; done fi
#7 DONE 0.4s

#8 [5/9] RUN targetArch=$(echo linux/ppc64le | cut -f2 -d '/')   && if [ ${targetArch} = "arm64" ] || [ ${targetArch} = "ppc64le" ]; then     echo "deb http://ports.ubuntu.com/ubuntu-ports/ xenial main" > /etc/apt/sources.list.d/ports.list     && apt-key adv --no-tty --keyserver keyserver.ubuntu.com --recv-keys 40976EAF437D05B5 3B4FE6ACC0B21F32     && apt-get update     && apt-get install -y build-essential; fi
#8 3.471 Warning: apt-key output should not be parsed (stdout is not a terminal)
{"component":"entrypoint","file":"prow/entrypoint/run.go:169","func":"k8s.io/test-infra/prow/entrypoint.Options.ExecuteProcess","level":"error","msg":"Entrypoint received interrupt: terminated","severity":"error","time":"2021-09-21T10:52:59Z"}