This job view page is being replaced by Spyglass soon. Check out the new job view.
PRtedyu: Output port as number in error message
ResultFAILURE
Tests 12 failed / 575 succeeded
Started2019-11-22 21:16
Elapsed19m38s
Revisionc224a6de5e01455bcd89763f1483546496e41dcb
Refs 85558

Test Failures


Kubernetes e2e suite [sig-storage] In-tree Volumes [Driver: local][LocalVolumeType: block] [Testpattern: Pre-provisioned PV (block volmode)] volumeMode should not mount / map unused volumes in a pod 14s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[sig\-storage\]\sIn\-tree\sVolumes\s\[Driver\:\slocal\]\[LocalVolumeType\:\sblock\]\s\[Testpattern\:\sPre\-provisioned\sPV\s\(block\svolmode\)\]\svolumeMode\sshould\snot\smount\s\/\smap\sunused\svolumes\sin\sa\spod$'
test/e2e/storage/testsuites/volumemode.go:333
Nov 22 21:25:13.965: Unexpected error:
    <exec.CodeExitError>: {
        Err: {
            s: "command terminated with exit code 1",
        },
        Code: 1,
    }
    command terminated with exit code 1
occurred
test/e2e/storage/utils/local.go:133
				
				Click to see stdout/stderrfrom junit_09.xml

Filter through log files | View test history on testgrid


Kubernetes e2e suite [sig-storage] In-tree Volumes [Driver: local][LocalVolumeType: block] [Testpattern: Pre-provisioned PV (block volmode)] volumeMode should not mount / map unused volumes in a pod 22s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[sig\-storage\]\sIn\-tree\sVolumes\s\[Driver\:\slocal\]\[LocalVolumeType\:\sblock\]\s\[Testpattern\:\sPre\-provisioned\sPV\s\(block\svolmode\)\]\svolumeMode\sshould\snot\smount\s\/\smap\sunused\svolumes\sin\sa\spod$'
test/e2e/storage/testsuites/volumemode.go:333
Nov 22 21:24:58.051: Unexpected error:
    <exec.CodeExitError>: {
        Err: {
            s: "command terminated with exit code 1",
        },
        Code: 1,
    }
    command terminated with exit code 1
occurred
test/e2e/storage/utils/local.go:133
				
				Click to see stdout/stderrfrom junit_09.xml

Filter through log files | View test history on testgrid


Kubernetes e2e suite [sig-storage] In-tree Volumes [Driver: local][LocalVolumeType: block] [Testpattern: Pre-provisioned PV (default fs)] subPath should support non-existent path 11s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[sig\-storage\]\sIn\-tree\sVolumes\s\[Driver\:\slocal\]\[LocalVolumeType\:\sblock\]\s\[Testpattern\:\sPre\-provisioned\sPV\s\(default\sfs\)\]\ssubPath\sshould\ssupport\snon\-existent\spath$'
test/e2e/storage/testsuites/subpath.go:189
Nov 22 21:23:57.438: Unexpected error:
    <exec.CodeExitError>: {
        Err: {
            s: "command terminated with exit code 1",
        },
        Code: 1,
    }
    command terminated with exit code 1
occurred
test/e2e/storage/utils/local.go:133
				
				Click to see stdout/stderrfrom junit_21.xml

Filter through log files | View test history on testgrid


Kubernetes e2e suite [sig-storage] In-tree Volumes [Driver: local][LocalVolumeType: block] [Testpattern: Pre-provisioned PV (default fs)] subPath should support readOnly file specified in the volumeMount [LinuxOnly] 13s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[sig\-storage\]\sIn\-tree\sVolumes\s\[Driver\:\slocal\]\[LocalVolumeType\:\sblock\]\s\[Testpattern\:\sPre\-provisioned\sPV\s\(default\sfs\)\]\ssubPath\sshould\ssupport\sreadOnly\sfile\sspecified\sin\sthe\svolumeMount\s\[LinuxOnly\]$'
test/e2e/storage/testsuites/subpath.go:374
Nov 22 21:29:54.863: Unexpected error:
    <exec.CodeExitError>: {
        Err: {
            s: "command terminated with exit code 1",
        },
        Code: 1,
    }
    command terminated with exit code 1
occurred
test/e2e/storage/utils/local.go:133
				
				Click to see stdout/stderrfrom junit_22.xml

Filter through log files | View test history on testgrid


Kubernetes e2e suite [sig-storage] In-tree Volumes [Driver: local][LocalVolumeType: block] [Testpattern: Pre-provisioned PV (ext4)] volumes should allow exec of files on the volume 14s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[sig\-storage\]\sIn\-tree\sVolumes\s\[Driver\:\slocal\]\[LocalVolumeType\:\sblock\]\s\[Testpattern\:\sPre\-provisioned\sPV\s\(ext4\)\]\svolumes\sshould\sallow\sexec\sof\sfiles\son\sthe\svolume$'
test/e2e/storage/testsuites/volumes.go:191
Nov 22 21:26:15.928: Unexpected error:
    <exec.CodeExitError>: {
        Err: {
            s: "command terminated with exit code 1",
        },
        Code: 1,
    }
    command terminated with exit code 1
occurred
test/e2e/storage/utils/local.go:133
				
				Click to see stdout/stderrfrom junit_21.xml

Filter through log files | View test history on testgrid


Kubernetes e2e suite [sig-storage] In-tree Volumes [Driver: local][LocalVolumeType: block] [Testpattern: Pre-provisioned PV (ext4)] volumes should allow exec of files on the volume 21s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[sig\-storage\]\sIn\-tree\sVolumes\s\[Driver\:\slocal\]\[LocalVolumeType\:\sblock\]\s\[Testpattern\:\sPre\-provisioned\sPV\s\(ext4\)\]\svolumes\sshould\sallow\sexec\sof\sfiles\son\sthe\svolume$'
test/e2e/storage/testsuites/volumes.go:191
Nov 22 21:26:36.930: Unexpected error:
    <exec.CodeExitError>: {
        Err: {
            s: "command terminated with exit code 1",
        },
        Code: 1,
    }
    command terminated with exit code 1
occurred
test/e2e/storage/utils/local.go:133
				
				Click to see stdout/stderrfrom junit_21.xml

Filter through log files | View test history on testgrid


Kubernetes e2e suite [sig-storage] In-tree Volumes [Driver: local][LocalVolumeType: blockfs] [Testpattern: Pre-provisioned PV (filesystem volmode)] volumeMode should not mount / map unused volumes in a pod 22s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[sig\-storage\]\sIn\-tree\sVolumes\s\[Driver\:\slocal\]\[LocalVolumeType\:\sblockfs\]\s\[Testpattern\:\sPre\-provisioned\sPV\s\(filesystem\svolmode\)\]\svolumeMode\sshould\snot\smount\s\/\smap\sunused\svolumes\sin\sa\spod$'
test/e2e/storage/testsuites/volumemode.go:333
Nov 22 21:26:36.058: Unexpected error:
    <exec.CodeExitError>: {
        Err: {
            s: "command terminated with exit code 1",
        },
        Code: 1,
    }
    command terminated with exit code 1
occurred
test/e2e/storage/utils/local.go:133
				
				Click to see stdout/stderrfrom junit_19.xml

Filter through log files | View test history on testgrid


Kubernetes e2e suite [sig-storage] In-tree Volumes [Driver: local][LocalVolumeType: blockfs] [Testpattern: Pre-provisioned PV (filesystem volmode)] volumeMode should not mount / map unused volumes in a pod 24s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[sig\-storage\]\sIn\-tree\sVolumes\s\[Driver\:\slocal\]\[LocalVolumeType\:\sblockfs\]\s\[Testpattern\:\sPre\-provisioned\sPV\s\(filesystem\svolmode\)\]\svolumeMode\sshould\snot\smount\s\/\smap\sunused\svolumes\sin\sa\spod$'
test/e2e/storage/testsuites/volumemode.go:333
Nov 22 21:26:12.253: Unexpected error:
    <exec.CodeExitError>: {
        Err: {
            s: "command terminated with exit code 1",
        },
        Code: 1,
    }
    command terminated with exit code 1
occurred
test/e2e/storage/utils/local.go:133
				
				Click to see stdout/stderrfrom junit_19.xml

Filter through log files | View test history on testgrid


Kubernetes e2e suite [sig-storage] PersistentVolumes-local [Volume type: block] One pod requesting one prebound PVC should be able to mount volume and write from pod1 12s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[sig\-storage\]\sPersistentVolumes\-local\s\s\[Volume\stype\:\sblock\]\sOne\spod\srequesting\sone\sprebound\sPVC\sshould\sbe\sable\sto\smount\svolume\sand\swrite\sfrom\spod1$'
test/e2e/storage/persistent_volumes-local.go:189
Nov 22 21:23:42.490: Unexpected error:
    <exec.CodeExitError>: {
        Err: {
            s: "command terminated with exit code 1",
        },
        Code: 1,
    }
    command terminated with exit code 1
occurred
test/e2e/storage/utils/local.go:133
				
				Click to see stdout/stderrfrom junit_02.xml

Filter through log files | View test history on testgrid


Kubernetes e2e suite [sig-storage] PersistentVolumes-local [Volume type: block] One pod requesting one prebound PVC should be able to mount volume and write from pod1 15s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[sig\-storage\]\sPersistentVolumes\-local\s\s\[Volume\stype\:\sblock\]\sOne\spod\srequesting\sone\sprebound\sPVC\sshould\sbe\sable\sto\smount\svolume\sand\swrite\sfrom\spod1$'
test/e2e/storage/persistent_volumes-local.go:189
Nov 22 21:23:57.506: Unexpected error:
    <exec.CodeExitError>: {
        Err: {
            s: "command terminated with exit code 1",
        },
        Code: 1,
    }
    command terminated with exit code 1
occurred
test/e2e/storage/utils/local.go:133
				
				Click to see stdout/stderrfrom junit_02.xml

Filter through log files | View test history on testgrid


Kubernetes e2e suite [sig-storage] PersistentVolumes-local [Volume type: block] Set fsGroup for local volume should set different fsGroup for second pod if first pod is deleted 19s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[sig\-storage\]\sPersistentVolumes\-local\s\s\[Volume\stype\:\sblock\]\sSet\sfsGroup\sfor\slocal\svolume\sshould\sset\sdifferent\sfsGroup\sfor\ssecond\spod\sif\sfirst\spod\sis\sdeleted$'
test/e2e/storage/persistent_volumes-local.go:189
Nov 22 21:29:55.673: Unexpected error:
    <exec.CodeExitError>: {
        Err: {
            s: "command terminated with exit code 1",
        },
        Code: 1,
    }
    command terminated with exit code 1
occurred
test/e2e/storage/utils/local.go:133
				
				Click to see stdout/stderrfrom junit_14.xml

Filter through log files | View test history on testgrid


Kubernetes e2e suite [sig-storage] PersistentVolumes-local [Volume type: blockfswithoutformat] Two pods mounting a local volume one after the other should be able to write from pod1 and read from pod2 7.64s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[sig\-storage\]\sPersistentVolumes\-local\s\s\[Volume\stype\:\sblockfswithoutformat\]\sTwo\spods\smounting\sa\slocal\svolume\sone\safter\sthe\sother\sshould\sbe\sable\sto\swrite\sfrom\spod1\sand\sread\sfrom\spod2$'
test/e2e/storage/persistent_volumes-local.go:189
Nov 22 21:24:23.213: Unexpected error:
    <exec.CodeExitError>: {
        Err: {
            s: "command terminated with exit code 1",
        },
        Code: 1,
    }
    command terminated with exit code 1
occurred
test/e2e/storage/utils/local.go:133
				
				Click to see stdout/stderrfrom junit_19.xml

Filter through log files | View test history on testgrid


Show 575 Passed Tests

Show 4235 Skipped Tests