This job view page is being replaced by Spyglass soon. Check out the new job view.
PRzouyee: Remove type and replace it with scheduler methods
ResultFAILURE
Tests 0 failed / 0 succeeded
Started2020-01-07 05:34
Elapsed6m30s
Revisionedcdde719e073216948c99bff0ff1dbf7eab93d5
Refs 85442

No Test Failures!


Error lines from build-log.txt

... skipping 190 lines ...
localAPIEndpoint:
  advertiseAddress: 172.17.0.3
  bindPort: 6443
nodeRegistration:
  criSocket: /run/containerd/containerd.sock
  kubeletExtraArgs:
    fail-swap-on: "false"
    node-ip: 172.17.0.3
---
apiVersion: kubeadm.k8s.io/v1beta2
controlPlane:
  localAPIEndpoint:
    advertiseAddress: 172.17.0.3
... skipping 4 lines ...
    token: abcdef.0123456789abcdef
    unsafeSkipCAVerification: true
kind: JoinConfiguration
nodeRegistration:
  criSocket: /run/containerd/containerd.sock
  kubeletExtraArgs:
    fail-swap-on: "false"
    node-ip: 172.17.0.3
---
apiVersion: kubelet.config.k8s.io/v1beta1
evictionHard:
  imagefs.available: 0%
  nodefs.available: 0%
... skipping 29 lines ...
localAPIEndpoint:
  advertiseAddress: 172.17.0.4
  bindPort: 6443
nodeRegistration:
  criSocket: /run/containerd/containerd.sock
  kubeletExtraArgs:
    fail-swap-on: "false"
    node-ip: 172.17.0.4
---
apiVersion: kubeadm.k8s.io/v1beta2
discovery:
  bootstrapToken:
    apiServerEndpoint: 172.17.0.3:6443
    token: abcdef.0123456789abcdef
    unsafeSkipCAVerification: true
kind: JoinConfiguration
nodeRegistration:
  criSocket: /run/containerd/containerd.sock
  kubeletExtraArgs:
    fail-swap-on: "false"
    node-ip: 172.17.0.4
---
apiVersion: kubelet.config.k8s.io/v1beta1
evictionHard:
  imagefs.available: 0%
  nodefs.available: 0%
... skipping 29 lines ...
localAPIEndpoint:
  advertiseAddress: 172.17.0.2
  bindPort: 6443
nodeRegistration:
  criSocket: /run/containerd/containerd.sock
  kubeletExtraArgs:
    fail-swap-on: "false"
    node-ip: 172.17.0.2
---
apiVersion: kubeadm.k8s.io/v1beta2
discovery:
  bootstrapToken:
    apiServerEndpoint: 172.17.0.3:6443
    token: abcdef.0123456789abcdef
    unsafeSkipCAVerification: true
kind: JoinConfiguration
nodeRegistration:
  criSocket: /run/containerd/containerd.sock
  kubeletExtraArgs:
    fail-swap-on: "false"
    node-ip: 172.17.0.2
---
apiVersion: kubelet.config.k8s.io/v1beta1
evictionHard:
  imagefs.available: 0%
  nodefs.available: 0%
... skipping 38 lines ...
I0107 05:38:04.199248     151 checks.go:376] validating the presence of executable ebtables
I0107 05:38:04.199282     151 checks.go:376] validating the presence of executable ethtool
I0107 05:38:04.199316     151 checks.go:376] validating the presence of executable socat
I0107 05:38:04.199351     151 checks.go:376] validating the presence of executable tc
I0107 05:38:04.199382     151 checks.go:376] validating the presence of executable touch
I0107 05:38:04.199447     151 checks.go:520] running all checks
	[WARNING SystemVerification]: failed to parse kernel config: unable to load kernel module: "configs", output: "modprobe: FATAL: Module configs not found in directory /lib/modules/4.15.0-1044-gke\n", err: exit status 1
I0107 05:38:04.205167     151 checks.go:406] checking whether the given node name is reachable using net.LookupHost
[preflight] The system verification failed. Printing the output from the verification:
KERNEL_VERSION: 4.15.0-1044-gke
OS: Linux
CGROUPS_CPU: enabled
CGROUPS_CPUACCT: enabled
CGROUPS_CPUSET: enabled
CGROUPS_DEVICES: enabled
... skipping 73 lines ...
I0107 05:38:12.614557     151 round_trippers.go:443] GET https://172.17.0.3:6443/healthz?timeout=10s  in 1 milliseconds
I0107 05:38:12.614621     151 request.go:853] Got a Retry-After 1s response for attempt 4 to https://172.17.0.3:6443/healthz?timeout=10s
I0107 05:38:13.615157     151 round_trippers.go:443] GET https://172.17.0.3:6443/healthz?timeout=10s  in 0 milliseconds
I0107 05:38:13.615213     151 request.go:853] Got a Retry-After 1s response for attempt 5 to https://172.17.0.3:6443/healthz?timeout=10s
I0107 05:38:14.615742     151 round_trippers.go:443] GET https://172.17.0.3:6443/healthz?timeout=10s  in 0 milliseconds
I0107 05:38:14.615806     151 request.go:853] Got a Retry-After 1s response for attempt 6 to https://172.17.0.3:6443/healthz?timeout=10s
I0107 05:38:18.790177     151 round_trippers.go:443] GET https://172.17.0.3:6443/healthz?timeout=10s 500 Internal Server Error in 3174 milliseconds
I0107 05:38:19.292484     151 round_trippers.go:443] GET https://172.17.0.3:6443/healthz?timeout=10s 500 Internal Server Error in 1 milliseconds
I0107 05:38:19.791943     151 round_trippers.go:443] GET https://172.17.0.3:6443/healthz?timeout=10s 500 Internal Server Error in 1 milliseconds
I0107 05:38:20.292509     151 round_trippers.go:443] GET https://172.17.0.3:6443/healthz?timeout=10s 200 OK in 1 milliseconds
I0107 05:38:20.292627     151 uploadconfig.go:108] [upload-config] Uploading the kubeadm ClusterConfiguration to a ConfigMap
[apiclient] All control plane components are healthy after 10.681912 seconds
[upload-config] Storing the configuration used in ConfigMap "kubeadm-config" in the "kube-system" Namespace
I0107 05:38:20.296607     151 round_trippers.go:443] POST https://172.17.0.3:6443/api/v1/namespaces/kube-system/configmaps?timeout=10s 201 Created in 2 milliseconds
I0107 05:38:20.299743     151 round_trippers.go:443] POST https://172.17.0.3:6443/apis/rbac.authorization.k8s.io/v1/namespaces/kube-system/roles?timeout=10s 201 Created in 2 milliseconds
... skipping 106 lines ...
I0107 05:38:24.892742     348 checks.go:376] validating the presence of executable ebtables
I0107 05:38:24.892780     348 checks.go:376] validating the presence of executable ethtool
I0107 05:38:24.892808     348 checks.go:376] validating the presence of executable socat
I0107 05:38:24.892848     348 checks.go:376] validating the presence of executable tc
I0107 05:38:24.892876     348 checks.go:376] validating the presence of executable touch
I0107 05:38:24.892914     348 checks.go:520] running all checks
[preflight] The system verification failed. Printing the output from the verification:
KERNEL_VERSION: 4.15.0-1044-gke
OS: Linux
CGROUPS_CPU: enabled
CGROUPS_CPUACCT: enabled
CGROUPS_CPUSET: enabled
CGROUPS_DEVICES: enabled
CGROUPS_FREEZER: enabled
CGROUPS_MEMORY: enabled
	[WARNING SystemVerification]: failed to parse kernel config: unable to load kernel module: "configs", output: "modprobe: FATAL: Module configs not found in directory /lib/modules/4.15.0-1044-gke\n", err: exit status 1
I0107 05:38:24.898151     348 checks.go:406] checking whether the given node name is reachable using net.LookupHost
I0107 05:38:24.898587     348 checks.go:618] validating kubelet version
I0107 05:38:24.967331     348 checks.go:128] validating if the service is enabled and active
I0107 05:38:24.985600     348 checks.go:201] validating availability of port 10250
I0107 05:38:24.985764     348 checks.go:286] validating the existence of file /etc/kubernetes/pki/ca.crt
I0107 05:38:24.985790     348 checks.go:432] validating if the connectivity type is via proxy or direct
... skipping 97 lines ...
I0107 05:38:24.897312     353 checks.go:376] validating the presence of executable ebtables
I0107 05:38:24.897354     353 checks.go:376] validating the presence of executable ethtool
I0107 05:38:24.897379     353 checks.go:376] validating the presence of executable socat
I0107 05:38:24.897405     353 checks.go:376] validating the presence of executable tc
I0107 05:38:24.897424     353 checks.go:376] validating the presence of executable touch
I0107 05:38:24.897457     353 checks.go:520] running all checks
	[WARNING SystemVerification]: failed to parse kernel config: unable to load kernel module: "configs", output: "modprobe: FATAL: Module configs not found in directory /lib/modules/4.15.0-1044-gke\n", err: exit status 1
I0107 05:38:24.904292     353 checks.go:406] checking whether the given node name is reachable using net.LookupHost
[preflight] The system verification failed. Printing the output from the verification:
KERNEL_VERSION: 4.15.0-1044-gke
OS: Linux
CGROUPS_CPU: enabled
CGROUPS_CPUACCT: enabled
CGROUPS_CPUSET: enabled
CGROUPS_DEVICES: enabled
... skipping 113 lines ...

Running in parallel across 25 nodes

Jan  7 05:39:10.992: INFO: >>> kubeConfig: /root/.kube/kind-test-config
Jan  7 05:39:10.994: INFO: Waiting up to 30m0s for all (but 0) nodes to be schedulable
Jan  7 05:39:11.006: INFO: Condition Ready of node kind-worker2 is false, but Node is tainted by NodeController with [{node.kubernetes.io/not-ready  NoSchedule <nil>} {node.kubernetes.io/not-ready  NoExecute 2020-01-07 05:39:02 +0000 UTC}]. Failure
Jan  7 05:39:11.006: INFO: Condition Ready of node kind-worker is false instead of true. Reason: KubeletNotReady, message: Failed to initialize CSINodeInfo: error updating CSINode annotation: timed out waiting for the condition; caused by: nodes "kind-worker" not found
Jan  7 05:39:11.006: INFO: Unschedulable nodes:
Jan  7 05:39:11.006: INFO: -> kind-worker2 Ready=false Network=false Taints=[{node.kubernetes.io/not-ready  NoSchedule <nil>} {node.kubernetes.io/not-ready  NoExecute 2020-01-07 05:39:02 +0000 UTC}] NonblockingTaints:node-role.kubernetes.io/master
Jan  7 05:39:11.006: INFO: -> kind-worker Ready=false Network=false Taints=[{node.kubernetes.io/not-ready  NoSchedule <nil>}] NonblockingTaints:node-role.kubernetes.io/master
Jan  7 05:39:11.006: INFO: ================================
Jan  7 05:39:41.008: INFO: Waiting up to 10m0s for all pods (need at least 0) in namespace 'kube-system' to be running and ready
Jan  7 05:39:41.030: INFO: 12 / 12 pods in namespace 'kube-system' are running and ready (0 seconds elapsed)
... skipping 389 lines ...
  test/e2e/framework/framework.go:175
Jan  7 05:39:41.124: INFO: Waiting up to 3m0s for all (but 0) nodes to be ready
STEP: Destroying namespace "metrics-grabber-4003" for this suite.

•S
------------------------------
{"msg":"PASSED [sig-instrumentation] MetricsGrabber should grab all metrics from a Scheduler.","total":-1,"completed":1,"skipped":5,"failed":0}

SSSSSSS
------------------------------
[BeforeEach] [sig-storage] Zone Support
  test/e2e/framework/framework.go:174
STEP: Creating a kubernetes client
... skipping 40 lines ...
  test/e2e/framework/framework.go:175
Jan  7 05:39:41.169: INFO: Waiting up to 3m0s for all (but 0) nodes to be ready
STEP: Destroying namespace "sysctl-456" for this suite.

•SSS
------------------------------
{"msg":"PASSED [k8s.io] Sysctls [LinuxOnly] [NodeFeature:Sysctls] should reject invalid sysctls","total":-1,"completed":1,"skipped":3,"failed":0}
[BeforeEach] [Testpattern: Pre-provisioned PV (ext4)] volumes
  test/e2e/storage/testsuites/base.go:94
Jan  7 05:39:41.242: INFO: Driver csi-hostpath doesn't support PreprovisionedPV -- skipping
[AfterEach] [Testpattern: Pre-provisioned PV (ext4)] volumes
  test/e2e/framework/framework.go:175
Jan  7 05:39:41.242: INFO: Waiting up to 3m0s for all (but 0) nodes to be ready
... skipping 100 lines ...
  test/e2e/framework/framework.go:175
Jan  7 05:39:41.361: INFO: Waiting up to 3m0s for all (but 0) nodes to be ready
STEP: Destroying namespace "runtimeclass-7241" for this suite.

•
------------------------------
{"msg":"PASSED [sig-node] RuntimeClass should reject a Pod requesting a non-existent RuntimeClass","total":-1,"completed":1,"skipped":2,"failed":0}

SSSSS
------------------------------
[BeforeEach] [sig-scheduling] Multi-AZ Cluster Volumes [sig-storage]
  test/e2e/framework/framework.go:174
STEP: Creating a kubernetes client
... skipping 58 lines ...
  test/e2e/framework/framework.go:175
Jan  7 05:39:42.264: INFO: Waiting up to 3m0s for all (but 0) nodes to be ready
STEP: Destroying namespace "custom-resource-definition-7953" for this suite.

•
------------------------------
{"msg":"PASSED [sig-api-machinery] CustomResourceDefinition resources [Privileged:ClusterAdmin] Simple CustomResourceDefinition creating/deleting custom resource definition objects works  [Conformance]","total":-1,"completed":1,"skipped":2,"failed":0}

SS
------------------------------
[BeforeEach] [sig-instrumentation] MetricsGrabber
  test/e2e/framework/framework.go:174
STEP: Creating a kubernetes client
... skipping 11 lines ...
  test/e2e/framework/framework.go:175
Jan  7 05:39:42.404: INFO: Waiting up to 3m0s for all (but 0) nodes to be ready
STEP: Destroying namespace "metrics-grabber-3195" for this suite.

•
------------------------------
{"msg":"PASSED [sig-instrumentation] MetricsGrabber should grab all metrics from API server.","total":-1,"completed":1,"skipped":25,"failed":0}

SSSSS
------------------------------
[BeforeEach] [Testpattern: Pre-provisioned PV (block volmode)] volumes
  test/e2e/storage/testsuites/base.go:94
Jan  7 05:39:42.419: INFO: Only supported for providers [openstack] (not skeleton)
... skipping 72 lines ...
  test/e2e/framework/framework.go:175
Jan  7 05:39:43.029: INFO: Waiting up to 3m0s for all (but 0) nodes to be ready
STEP: Destroying namespace "kubectl-2695" for this suite.

•
------------------------------
{"msg":"PASSED [sig-cli] Kubectl client Kubectl create quota should create a quota without scopes","total":-1,"completed":1,"skipped":22,"failed":0}

SS
------------------------------
[BeforeEach] [Testpattern: Pre-provisioned PV (ext3)] volumes
  test/e2e/storage/testsuites/base.go:94
Jan  7 05:39:43.046: INFO: Driver local doesn't support ext3 -- skipping
... skipping 43 lines ...
  test/e2e/common/runtime.go:38
    when running a container with a new image
    test/e2e/common/runtime.go:263
      should be able to pull image [NodeConformance]
      test/e2e/common/runtime.go:374
------------------------------
{"msg":"PASSED [k8s.io] Container Runtime blackbox test when running a container with a new image should be able to pull image [NodeConformance]","total":-1,"completed":1,"skipped":1,"failed":0}

SSSSS
------------------------------
[BeforeEach] [Testpattern: Pre-provisioned PV (ext3)] volumes
  test/e2e/storage/testsuites/base.go:94
Jan  7 05:39:48.405: INFO: Driver hostPath doesn't support PreprovisionedPV -- skipping
... skipping 125 lines ...
• [SLOW TEST:8.573 seconds]
[k8s.io] Docker Containers
test/e2e/framework/framework.go:680
  should be able to override the image's default command (docker entrypoint) [NodeConformance] [Conformance]
  test/e2e/framework/framework.go:685
------------------------------
{"msg":"PASSED [k8s.io] Docker Containers should be able to override the image's default command (docker entrypoint) [NodeConformance] [Conformance]","total":-1,"completed":1,"skipped":0,"failed":0}

SSSSSS
------------------------------
[BeforeEach] [k8s.io] Security Context
  test/e2e/framework/framework.go:174
STEP: Creating a kubernetes client
... skipping 22 lines ...
test/e2e/framework/framework.go:680
  When creating a pod with privileged
  test/e2e/common/security_context.go:226
    should run the container as privileged when true [LinuxOnly] [NodeFeature:HostAccess]
    test/e2e/common/security_context.go:276
------------------------------
{"msg":"PASSED [k8s.io] Security Context When creating a pod with privileged should run the container as privileged when true [LinuxOnly] [NodeFeature:HostAccess]","total":-1,"completed":2,"skipped":33,"failed":0}

SSS
------------------------------
[BeforeEach] [Testpattern: Inline-volume (default fs)] subPath
  test/e2e/storage/testsuites/base.go:94
Jan  7 05:39:50.346: INFO: Driver supports dynamic provisioning, skipping InlineVolume pattern
... skipping 96 lines ...
• [SLOW TEST:10.534 seconds]
[k8s.io] InitContainer [NodeConformance]
test/e2e/framework/framework.go:680
  should invoke init containers on a RestartAlways pod [Conformance]
  test/e2e/framework/framework.go:685
------------------------------
{"msg":"PASSED [k8s.io] InitContainer [NodeConformance] should invoke init containers on a RestartAlways pod [Conformance]","total":-1,"completed":1,"skipped":9,"failed":0}

SSSSSSSSS
------------------------------
[BeforeEach] [Testpattern: Inline-volume (ext4)] volumes
  test/e2e/storage/testsuites/base.go:94
Jan  7 05:39:51.752: INFO: Driver local doesn't support InlineVolume -- skipping
... skipping 69 lines ...
STEP: Creating a kubernetes client
Jan  7 05:39:51.764: INFO: >>> kubeConfig: /root/.kube/kind-test-config
STEP: Building a namespace api object, basename volume-provisioning
STEP: Waiting for a default service account to be provisioned in namespace
[BeforeEach] [sig-storage] Dynamic Provisioning
  test/e2e/storage/volume_provisioning.go:142
[It] should report an error and create no PV
  test/e2e/storage/volume_provisioning.go:783
Jan  7 05:39:51.784: INFO: Only supported for providers [aws] (not skeleton)
[AfterEach] [sig-storage] Dynamic Provisioning
  test/e2e/framework/framework.go:175
Jan  7 05:39:51.785: INFO: Waiting up to 3m0s for all (but 0) nodes to be ready
STEP: Destroying namespace "volume-provisioning-4251" for this suite.


S [SKIPPING] [0.027 seconds]
[sig-storage] Dynamic Provisioning
test/e2e/storage/utils/framework.go:23
  Invalid AWS KMS key
  test/e2e/storage/volume_provisioning.go:782
    should report an error and create no PV [It]
    test/e2e/storage/volume_provisioning.go:783

    Only supported for providers [aws] (not skeleton)

    test/e2e/storage/volume_provisioning.go:784
------------------------------
... skipping 20 lines ...
• [SLOW TEST:15.239 seconds]
[sig-apps] ReplicationController
test/e2e/apps/framework.go:23
  should adopt matching pods on creation [Conformance]
  test/e2e/framework/framework.go:685
------------------------------
{"msg":"PASSED [sig-apps] ReplicationController should adopt matching pods on creation [Conformance]","total":-1,"completed":1,"skipped":1,"failed":0}

SSSSSSSSSSSSSSS
------------------------------
[BeforeEach] [Testpattern: Inline-volume (default fs)] volumes
  test/e2e/storage/testsuites/base.go:94
Jan  7 05:39:56.445: INFO: Only supported for node OS distro [gci ubuntu custom] (not debian)
... skipping 52 lines ...
• [SLOW TEST:15.686 seconds]
[sig-storage] EmptyDir volumes
test/e2e/common/empty_dir.go:40
  should support (non-root,0644,default) [LinuxOnly] [NodeConformance] [Conformance]
  test/e2e/framework/framework.go:685
------------------------------
{"msg":"PASSED [sig-storage] EmptyDir volumes should support (non-root,0644,default) [LinuxOnly] [NodeConformance] [Conformance]","total":-1,"completed":1,"skipped":2,"failed":0}

SSS
------------------------------
[BeforeEach] [sig-storage] Projected downwardAPI
  test/e2e/framework/framework.go:174
STEP: Creating a kubernetes client
... skipping 31 lines ...
• [SLOW TEST:16.334 seconds]
[sig-storage] Projected downwardAPI
test/e2e/common/projected_downwardapi.go:34
  should provide node allocatable (memory) as default memory limit if the limit is not set [NodeConformance] [Conformance]
  test/e2e/framework/framework.go:685
------------------------------
{"msg":"PASSED [sig-storage] Projected downwardAPI should provide node allocatable (memory) as default memory limit if the limit is not set [NodeConformance] [Conformance]","total":-1,"completed":1,"skipped":4,"failed":0}

SSSSSSS
------------------------------
[BeforeEach] [Testpattern: Pre-provisioned PV (filesystem volmode)] volumeMode
  test/e2e/storage/testsuites/base.go:94
Jan  7 05:39:57.560: INFO: Only supported for providers [azure] (not skeleton)
... skipping 52 lines ...
• [SLOW TEST:16.389 seconds]
[sig-storage] EmptyDir volumes
test/e2e/common/empty_dir.go:40
  should support (non-root,0777,default) [LinuxOnly] [NodeConformance] [Conformance]
  test/e2e/framework/framework.go:685
------------------------------
{"msg":"PASSED [sig-storage] EmptyDir volumes should support (non-root,0777,default) [LinuxOnly] [NodeConformance] [Conformance]","total":-1,"completed":1,"skipped":1,"failed":0}
[BeforeEach] [Testpattern: Inline-volume (ext4)] volumes
  test/e2e/storage/testsuites/base.go:94
Jan  7 05:39:57.582: INFO: Only supported for providers [aws] (not skeleton)
[AfterEach] [Testpattern: Inline-volume (ext4)] volumes
  test/e2e/framework/framework.go:175
Jan  7 05:39:57.583: INFO: Waiting up to 3m0s for all (but 0) nodes to be ready
... skipping 95 lines ...
• [SLOW TEST:16.930 seconds]
[sig-api-machinery] ResourceQuota
test/e2e/apimachinery/framework.go:23
  should verify ResourceQuota with terminating scopes. [Conformance]
  test/e2e/framework/framework.go:685
------------------------------
{"msg":"PASSED [sig-api-machinery] ResourceQuota should verify ResourceQuota with terminating scopes. [Conformance]","total":-1,"completed":1,"skipped":9,"failed":0}

SSS
------------------------------
[BeforeEach] [sig-storage] ConfigMap
  test/e2e/framework/framework.go:174
STEP: Creating a kubernetes client
... skipping 29 lines ...
• [SLOW TEST:18.479 seconds]
[sig-storage] ConfigMap
test/e2e/common/configmap_volume.go:33
  should be consumable from pods in volume with mappings as non-root with FSGroup [LinuxOnly] [NodeFeature:FSGroup]
  test/e2e/common/configmap_volume.go:107
------------------------------
{"msg":"PASSED [sig-storage] ConfigMap should be consumable from pods in volume with mappings as non-root with FSGroup [LinuxOnly] [NodeFeature:FSGroup]","total":-1,"completed":2,"skipped":22,"failed":0}

SSSSSSSSSS
------------------------------
[BeforeEach] [Testpattern: Pre-provisioned PV (block volmode)] volumes
  test/e2e/storage/testsuites/base.go:94
[BeforeEach] [Testpattern: Pre-provisioned PV (block volmode)] volumes
... skipping 63 lines ...
• [SLOW TEST:18.990 seconds]
[sig-storage] Projected downwardAPI
test/e2e/common/projected_downwardapi.go:34
  should provide podname as non-root with fsgroup and defaultMode [LinuxOnly] [NodeFeature:FSGroup]
  test/e2e/common/projected_downwardapi.go:105
------------------------------
{"msg":"PASSED [sig-storage] Projected downwardAPI should provide podname as non-root with fsgroup and defaultMode [LinuxOnly] [NodeFeature:FSGroup]","total":-1,"completed":2,"skipped":7,"failed":0}

S
------------------------------
[BeforeEach] [sig-storage] Zone Support
  test/e2e/framework/framework.go:174
STEP: Creating a kubernetes client
... skipping 52 lines ...
• [SLOW TEST:10.106 seconds]
[sig-storage] Secrets
test/e2e/common/secrets_volume.go:34
  should be able to mount in a volume regardless of a different secret existing with same name in different namespace [NodeConformance] [Conformance]
  test/e2e/framework/framework.go:685
------------------------------
{"msg":"PASSED [sig-storage] Secrets should be able to mount in a volume regardless of a different secret existing with same name in different namespace [NodeConformance] [Conformance]","total":-1,"completed":3,"skipped":38,"failed":0}

SSS
------------------------------
[BeforeEach] [Testpattern: Pre-provisioned PV (ext3)] volumes
  test/e2e/storage/testsuites/base.go:94
Jan  7 05:40:00.462: INFO: Driver vsphere doesn't support ext3 -- skipping
... skipping 109 lines ...
  test/e2e/kubectl/portforward.go:442
    that expects NO client request
    test/e2e/kubectl/portforward.go:452
      should support a client that connects, sends DATA, and disconnects
      test/e2e/kubectl/portforward.go:453
------------------------------
{"msg":"PASSED [sig-cli] Kubectl Port forwarding With a server listening on 0.0.0.0 that expects NO client request should support a client that connects, sends DATA, and disconnects","total":-1,"completed":1,"skipped":3,"failed":0}

S
------------------------------
[BeforeEach] [sig-apps] Deployment
  test/e2e/framework/framework.go:174
STEP: Creating a kubernetes client
... skipping 109 lines ...
• [SLOW TEST:20.377 seconds]
[sig-apps] Deployment
test/e2e/apps/framework.go:23
  deployment should support proportional scaling [Conformance]
  test/e2e/framework/framework.go:685
------------------------------
{"msg":"PASSED [sig-apps] Deployment deployment should support proportional scaling [Conformance]","total":-1,"completed":1,"skipped":0,"failed":0}
[BeforeEach] [Testpattern: Inline-volume (ext3)] volumes
  test/e2e/storage/testsuites/base.go:94
Jan  7 05:40:01.568: INFO: Driver hostPathSymlink doesn't support ext3 -- skipping
[AfterEach] [Testpattern: Inline-volume (ext3)] volumes
  test/e2e/framework/framework.go:175
Jan  7 05:40:01.569: INFO: Waiting up to 3m0s for all (but 0) nodes to be ready
... skipping 60 lines ...
test/e2e/framework/framework.go:680
  when scheduling a busybox Pod with hostAliases
  test/e2e/common/kubelet.go:136
    should write entries to /etc/hosts [LinuxOnly] [NodeConformance] [Conformance]
    test/e2e/framework/framework.go:685
------------------------------
{"msg":"PASSED [k8s.io] Kubelet when scheduling a busybox Pod with hostAliases should write entries to /etc/hosts [LinuxOnly] [NodeConformance] [Conformance]","total":-1,"completed":2,"skipped":32,"failed":0}

S
------------------------------
[BeforeEach] [sig-cli] Kubectl client
  test/e2e/framework/framework.go:174
STEP: Creating a kubernetes client
... skipping 64 lines ...
test/e2e/kubectl/framework.go:23
  Simple pod
  test/e2e/kubectl/kubectl.go:524
    should support exec
    test/e2e/kubectl/kubectl.go:536
------------------------------
{"msg":"PASSED [sig-cli] Kubectl client Simple pod should support exec","total":-1,"completed":2,"skipped":35,"failed":0}

SSSSSS
------------------------------
[BeforeEach] [k8s.io] [sig-node] Security Context
  test/e2e/framework/framework.go:174
STEP: Creating a kubernetes client
... skipping 30 lines ...
• [SLOW TEST:20.146 seconds]
[k8s.io] [sig-node] Security Context
test/e2e/framework/framework.go:680
  should support container.SecurityContext.RunAsUser [LinuxOnly]
  test/e2e/node/security_context.go:102
------------------------------
{"msg":"PASSED [k8s.io] [sig-node] Security Context should support container.SecurityContext.RunAsUser [LinuxOnly]","total":-1,"completed":2,"skipped":6,"failed":0}

SSS
------------------------------
[BeforeEach] [sig-cli] Kubectl client
  test/e2e/framework/framework.go:174
STEP: Creating a kubernetes client
... skipping 66 lines ...
test/e2e/kubectl/framework.go:23
  Kubectl replace
  test/e2e/kubectl/kubectl.go:1894
    should update a single-container pod's image  [Conformance]
    test/e2e/framework/framework.go:685
------------------------------
{"msg":"PASSED [sig-cli] Kubectl client Kubectl replace should update a single-container pod's image  [Conformance]","total":-1,"completed":1,"skipped":1,"failed":0}

SSSSSS
------------------------------
[BeforeEach] [sig-storage] Projected configMap
  test/e2e/framework/framework.go:174
STEP: Creating a kubernetes client
... skipping 28 lines ...
• [SLOW TEST:14.076 seconds]
[sig-storage] Projected configMap
test/e2e/common/projected_configmap.go:34
  should be consumable in multiple volumes in the same pod [NodeConformance] [Conformance]
  test/e2e/framework/framework.go:685
------------------------------
{"msg":"PASSED [sig-storage] Projected configMap should be consumable in multiple volumes in the same pod [NodeConformance] [Conformance]","total":-1,"completed":2,"skipped":12,"failed":0}

SS
------------------------------
{"msg":"PASSED [sig-cli] Kubectl client Kubectl run --rm job should create a job from an image, then delete the job  [Conformance]","total":-1,"completed":2,"skipped":20,"failed":0}
[BeforeEach] [sig-cli] Kubectl client
  test/e2e/framework/framework.go:174
STEP: Creating a kubernetes client
Jan  7 05:40:10.263: INFO: >>> kubeConfig: /root/.kube/kind-test-config
STEP: Building a namespace api object, basename kubectl
STEP: Waiting for a default service account to be provisioned in namespace
... skipping 18 lines ...
  test/e2e/framework/framework.go:175
Jan  7 05:40:12.522: INFO: Waiting up to 3m0s for all (but 0) nodes to be ready
STEP: Destroying namespace "kubectl-1892" for this suite.

•
------------------------------
{"msg":"PASSED [sig-cli] Kubectl client Kubectl run deployment should create a deployment from an image  [Conformance]","total":-1,"completed":3,"skipped":20,"failed":0}

SSSSSS
------------------------------
[BeforeEach] [Testpattern: Pre-provisioned PV (default fs)] subPath
  test/e2e/storage/testsuites/base.go:94
[BeforeEach] [Testpattern: Pre-provisioned PV (default fs)] subPath
... skipping 62 lines ...
  test/e2e/storage/in_tree_volumes.go:70
    [Testpattern: Pre-provisioned PV (default fs)] subPath
    test/e2e/storage/testsuites/base.go:93
      should support readOnly file specified in the volumeMount [LinuxOnly]
      test/e2e/storage/testsuites/subpath.go:376
------------------------------
{"msg":"PASSED [sig-storage] In-tree Volumes [Driver: local][LocalVolumeType: dir-link-bindmounted] [Testpattern: Pre-provisioned PV (default fs)] subPath should support readOnly file specified in the volumeMount [LinuxOnly]","total":-1,"completed":1,"skipped":1,"failed":0}

SSS
------------------------------
[BeforeEach] [sig-storage] Projected secret
  test/e2e/framework/framework.go:174
STEP: Creating a kubernetes client
... skipping 30 lines ...
• [SLOW TEST:16.185 seconds]
[sig-storage] Projected secret
test/e2e/common/projected_secret.go:34
  should be able to mount in a volume regardless of a different secret existing with same name in different namespace [NodeConformance]
  test/e2e/common/projected_secret.go:89
------------------------------
{"msg":"PASSED [sig-storage] Projected secret should be able to mount in a volume regardless of a different secret existing with same name in different namespace [NodeConformance]","total":-1,"completed":3,"skipped":37,"failed":0}

SSSSSSSSSSSSSSSSSSSS
------------------------------
[BeforeEach] [sig-node] Downward API
  test/e2e/framework/framework.go:174
STEP: Creating a kubernetes client
... skipping 30 lines ...
• [SLOW TEST:20.096 seconds]
[sig-node] Downward API
test/e2e/common/downward_api.go:33
  should provide default limits.cpu/memory from node allocatable [NodeConformance] [Conformance]
  test/e2e/framework/framework.go:685
------------------------------
{"msg":"PASSED [sig-node] Downward API should provide default limits.cpu/memory from node allocatable [NodeConformance] [Conformance]","total":-1,"completed":2,"skipped":18,"failed":0}

SSSSS
------------------------------
[BeforeEach] [Testpattern: Inline-volume (default fs)] volumes
  test/e2e/storage/testsuites/base.go:94
Jan  7 05:40:16.551: INFO: Only supported for providers [azure] (not skeleton)
... skipping 39 lines ...
      Driver local doesn't support InlineVolume -- skipping

      test/e2e/storage/testsuites/base.go:147
------------------------------
SSSSSSS
------------------------------
{"msg":"PASSED [sig-node] ConfigMap should be consumable via the environment [NodeConformance] [Conformance]","total":-1,"completed":1,"skipped":5,"failed":0}
[BeforeEach] [Testpattern: Pre-provisioned PV (default fs)] subPath
  test/e2e/storage/testsuites/base.go:94
[BeforeEach] [Testpattern: Pre-provisioned PV (default fs)] subPath
  test/e2e/framework/framework.go:174
STEP: Creating a kubernetes client
Jan  7 05:39:51.378: INFO: >>> kubeConfig: /root/.kube/kind-test-config
... skipping 56 lines ...
  test/e2e/storage/in_tree_volumes.go:70
    [Testpattern: Pre-provisioned PV (default fs)] subPath
    test/e2e/storage/testsuites/base.go:93
      should support readOnly file specified in the volumeMount [LinuxOnly]
      test/e2e/storage/testsuites/subpath.go:376
------------------------------
{"msg":"PASSED [sig-storage] In-tree Volumes [Driver: local][LocalVolumeType: dir] [Testpattern: Pre-provisioned PV (default fs)] subPath should support readOnly file specified in the volumeMount [LinuxOnly]","total":-1,"completed":2,"skipped":5,"failed":0}

SSSS
------------------------------
[BeforeEach] [Testpattern: Pre-provisioned PV (default fs)] volumes
  test/e2e/storage/testsuites/base.go:94
Jan  7 05:40:17.771: INFO: Only supported for node OS distro [gci ubuntu custom] (not debian)
... skipping 53 lines ...
• [SLOW TEST:9.464 seconds]
[sig-api-machinery] AdmissionWebhook [Privileged:ClusterAdmin]
test/e2e/apimachinery/framework.go:23
  should mutate pod and apply defaults after mutation [Conformance]
  test/e2e/framework/framework.go:685
------------------------------
{"msg":"PASSED [sig-api-machinery] AdmissionWebhook [Privileged:ClusterAdmin] should mutate pod and apply defaults after mutation [Conformance]","total":-1,"completed":2,"skipped":7,"failed":0}

SS
------------------------------
[BeforeEach] [Testpattern: Inline-volume (default fs)] subPath
  test/e2e/storage/testsuites/base.go:94
Jan  7 05:40:19.831: INFO: Driver supports dynamic provisioning, skipping InlineVolume pattern
... skipping 48 lines ...
• [SLOW TEST:26.127 seconds]
[sig-apps] DisruptionController
test/e2e/apps/framework.go:23
  evictions: enough pods, absolute => should allow an eviction
  test/e2e/apps/disruption.go:149
------------------------------
{"msg":"PASSED [sig-apps] DisruptionController evictions: enough pods, absolute =\u003e should allow an eviction","total":-1,"completed":2,"skipped":5,"failed":0}

SSS
------------------------------
[BeforeEach] [Testpattern: Inline-volume (ntfs)][sig-windows] volumes
  test/e2e/storage/testsuites/base.go:94
Jan  7 05:40:23.019: INFO: Driver hostPath doesn't support ntfs -- skipping
... skipping 113 lines ...
test/e2e/kubectl/framework.go:23
  Simple pod
  test/e2e/kubectl/kubectl.go:524
    should support exec through kubectl proxy
    test/e2e/kubectl/kubectl.go:618
------------------------------
{"msg":"PASSED [sig-cli] Kubectl client Simple pod should support exec through kubectl proxy","total":-1,"completed":1,"skipped":3,"failed":0}

SS
------------------------------
[BeforeEach] [Testpattern: Pre-provisioned PV (default fs)] subPath
  test/e2e/storage/testsuites/base.go:94
[BeforeEach] [Testpattern: Pre-provisioned PV (default fs)] subPath
... skipping 72 lines ...
  test/e2e/storage/in_tree_volumes.go:70
    [Testpattern: Pre-provisioned PV (default fs)] subPath
    test/e2e/storage/testsuites/base.go:93
      should support readOnly file specified in the volumeMount [LinuxOnly]
      test/e2e/storage/testsuites/subpath.go:376
------------------------------
{"msg":"PASSED [sig-storage] In-tree Volumes [Driver: local][LocalVolumeType: blockfs] [Testpattern: Pre-provisioned PV (default fs)] subPath should support readOnly file specified in the volumeMount [LinuxOnly]","total":-1,"completed":2,"skipped":4,"failed":0}

S
------------------------------
[BeforeEach] [k8s.io] Pods
  test/e2e/framework/framework.go:174
STEP: Creating a kubernetes client
... skipping 20 lines ...
• [SLOW TEST:12.554 seconds]
[k8s.io] Pods
test/e2e/framework/framework.go:680
  should be updated [NodeConformance] [Conformance]
  test/e2e/framework/framework.go:685
------------------------------
{"msg":"PASSED [k8s.io] Pods should be updated [NodeConformance] [Conformance]","total":-1,"completed":4,"skipped":26,"failed":0}
[BeforeEach] [Testpattern: Inline-volume (ntfs)][sig-windows] volumes
  test/e2e/storage/testsuites/base.go:94
Jan  7 05:40:25.094: INFO: Distro debian doesn't support ntfs -- skipping
[AfterEach] [Testpattern: Inline-volume (ntfs)][sig-windows] volumes
  test/e2e/framework/framework.go:175
Jan  7 05:40:25.095: INFO: Waiting up to 3m0s for all (but 0) nodes to be ready
... skipping 77 lines ...
  test/e2e/storage/persistent_volumes-local.go:186
    One pod requesting one prebound PVC
    test/e2e/storage/persistent_volumes-local.go:203
      should be able to mount volume and write from pod1
      test/e2e/storage/persistent_volumes-local.go:232
------------------------------
{"msg":"PASSED [sig-storage] PersistentVolumes-local  [Volume type: dir-bindmounted] One pod requesting one prebound PVC should be able to mount volume and write from pod1","total":-1,"completed":1,"skipped":3,"failed":0}
[BeforeEach] [Testpattern: Pre-provisioned PV (block volmode)] volumeMode
  test/e2e/storage/testsuites/base.go:94
[BeforeEach] [Testpattern: Pre-provisioned PV (block volmode)] volumeMode
  test/e2e/framework/framework.go:174
STEP: Creating a kubernetes client
Jan  7 05:40:27.197: INFO: >>> kubeConfig: /root/.kube/kind-test-config
... skipping 47 lines ...
test/e2e/framework/framework.go:680
  when scheduling a busybox command that always fails in a pod
  test/e2e/common/kubelet.go:78
    should have an terminated reason [NodeConformance] [Conformance]
    test/e2e/framework/framework.go:685
------------------------------
{"msg":"PASSED [k8s.io] Kubelet when scheduling a busybox command that always fails in a pod should have an terminated reason [NodeConformance] [Conformance]","total":-1,"completed":4,"skipped":57,"failed":0}

S
------------------------------
[BeforeEach] [sig-storage] PersistentVolumes-local 
  test/e2e/framework/framework.go:174
STEP: Creating a kubernetes client
... skipping 59 lines ...
  test/e2e/storage/persistent_volumes-local.go:186
    Two pods mounting a local volume one after the other
    test/e2e/storage/persistent_volumes-local.go:248
      should be able to write from pod1 and read from pod2
      test/e2e/storage/persistent_volumes-local.go:249
------------------------------
{"msg":"PASSED [sig-storage] PersistentVolumes-local  [Volume type: dir-link-bindmounted] Two pods mounting a local volume one after the other should be able to write from pod1 and read from pod2","total":-1,"completed":2,"skipped":26,"failed":0}

SSSSSSSSSSSS
------------------------------
[BeforeEach] [sig-cli] Kubectl client
  test/e2e/framework/framework.go:174
STEP: Creating a kubernetes client
... skipping 71 lines ...
test/e2e/kubectl/framework.go:23
  Simple pod
  test/e2e/kubectl/kubectl.go:524
    should support exec using resource/name
    test/e2e/kubectl/kubectl.go:576
------------------------------
{"msg":"PASSED [sig-cli] Kubectl client Simple pod should support exec using resource/name","total":-1,"completed":3,"skipped":41,"failed":0}

SSS
------------------------------
[BeforeEach] [sig-storage] Downward API volume
  test/e2e/framework/framework.go:174
STEP: Creating a kubernetes client
... skipping 29 lines ...
• [SLOW TEST:14.101 seconds]
[sig-storage] Downward API volume
test/e2e/common/downwardapi_volume.go:35
  should provide container's memory request [NodeConformance] [Conformance]
  test/e2e/framework/framework.go:685
------------------------------
{"msg":"PASSED [sig-storage] Downward API volume should provide container's memory request [NodeConformance] [Conformance]","total":-1,"completed":3,"skipped":37,"failed":0}

SS
------------------------------
[BeforeEach] [sig-apps] Deployment
  test/e2e/framework/framework.go:174
STEP: Creating a kubernetes client
... skipping 41 lines ...
• [SLOW TEST:20.146 seconds]
[sig-apps] Deployment
test/e2e/apps/framework.go:23
  test Deployment ReplicaSet orphaning and adoption regarding controllerRef
  test/e2e/apps/deployment.go:114
------------------------------
{"msg":"PASSED [sig-apps] Deployment test Deployment ReplicaSet orphaning and adoption regarding controllerRef","total":-1,"completed":3,"skipped":14,"failed":0}

SSSS
------------------------------
[BeforeEach] [sig-api-machinery] Garbage collector
  test/e2e/framework/framework.go:174
STEP: Creating a kubernetes client
... skipping 39 lines ...
• [SLOW TEST:6.139 seconds]
[sig-api-machinery] Garbage collector
test/e2e/apimachinery/framework.go:23
  should keep the rc around until all its pods are deleted if the deleteOptions says so [Conformance]
  test/e2e/framework/framework.go:685
------------------------------
{"msg":"PASSED [sig-api-machinery] Garbage collector should keep the rc around until all its pods are deleted if the deleteOptions says so [Conformance]","total":-1,"completed":2,"skipped":7,"failed":0}

SSSSS
------------------------------
[BeforeEach] [Testpattern: Inline-volume (default fs)] subPath
  test/e2e/storage/testsuites/base.go:94
Jan  7 05:40:33.385: INFO: Driver supports dynamic provisioning, skipping InlineVolume pattern
... skipping 89 lines ...
  test/e2e/storage/persistent_volumes-local.go:186
    One pod requesting one prebound PVC
    test/e2e/storage/persistent_volumes-local.go:203
      should be able to mount volume and write from pod1
      test/e2e/storage/persistent_volumes-local.go:232
------------------------------
{"msg":"PASSED [sig-storage] PersistentVolumes-local  [Volume type: block] One pod requesting one prebound PVC should be able to mount volume and write from pod1","total":-1,"completed":2,"skipped":28,"failed":0}
[BeforeEach] [Testpattern: Pre-provisioned PV (ext3)] volumes
  test/e2e/storage/testsuites/base.go:94
Jan  7 05:40:35.072: INFO: Only supported for providers [aws] (not skeleton)
[AfterEach] [Testpattern: Pre-provisioned PV (ext3)] volumes
  test/e2e/framework/framework.go:175
Jan  7 05:40:35.073: INFO: Waiting up to 3m0s for all (but 0) nodes to be ready
... skipping 34 lines ...
• [SLOW TEST:14.063 seconds]
[sig-apps] DisruptionController
test/e2e/apps/framework.go:23
  evictions: too few pods, replicaSet, percentage => should not allow an eviction
  test/e2e/apps/disruption.go:149
------------------------------
{"msg":"PASSED [sig-apps] DisruptionController evictions: too few pods, replicaSet, percentage =\u003e should not allow an eviction","total":-1,"completed":3,"skipped":24,"failed":0}

SSS
------------------------------
[BeforeEach] [sig-storage] EmptyDir volumes
  test/e2e/framework/framework.go:174
STEP: Creating a kubernetes client
... skipping 64 lines ...
  test/e2e/common/runtime.go:38
    when starting a container that exits
    test/e2e/common/runtime.go:39
      should run with the expected status [NodeConformance] [Conformance]
      test/e2e/framework/framework.go:685
------------------------------
{"msg":"PASSED [k8s.io] Container Runtime blackbox test when starting a container that exits should run with the expected status [NodeConformance] [Conformance]","total":-1,"completed":1,"skipped":5,"failed":0}
[BeforeEach] [sig-storage] PersistentVolumes:vsphere
  test/e2e/framework/framework.go:174
STEP: Creating a kubernetes client
Jan  7 05:40:37.291: INFO: >>> kubeConfig: /root/.kube/kind-test-config
STEP: Building a namespace api object, basename pv
STEP: Waiting for a default service account to be provisioned in namespace
... skipping 62 lines ...
• [SLOW TEST:13.538 seconds]
[sig-network] Services
test/e2e/network/framework.go:23
  should allow pods to hairpin back to themselves through services
  test/e2e/network/service.go:938
------------------------------
{"msg":"PASSED [sig-network] Services should allow pods to hairpin back to themselves through services","total":-1,"completed":3,"skipped":5,"failed":0}
[BeforeEach] [Testpattern: Pre-provisioned PV (ext3)] volumes
  test/e2e/storage/testsuites/base.go:94
Jan  7 05:40:37.528: INFO: Driver local doesn't support ext3 -- skipping
[AfterEach] [Testpattern: Pre-provisioned PV (ext3)] volumes
  test/e2e/framework/framework.go:175
Jan  7 05:40:37.530: INFO: Waiting up to 3m0s for all (but 0) nodes to be ready
... skipping 78 lines ...
Jan  7 05:40:35.822: INFO: Running '/home/prow/go/src/k8s.io/kubernetes/bazel-bin/cmd/kubectl/linux_amd64_pure_stripped/kubectl --server=https://127.0.0.1:32768 --kubeconfig=/root/.kube/kind-test-config explain e2e-test-crd-publish-openapi-6907-crds.spec'
Jan  7 05:40:36.053: INFO: stderr: ""
Jan  7 05:40:36.053: INFO: stdout: "KIND:     E2e-test-crd-publish-openapi-6907-crd\nVERSION:  crd-publish-openapi-test-foo.example.com/v1\n\nRESOURCE: spec <Object>\n\nDESCRIPTION:\n     Specification of Foo\n\nFIELDS:\n   bars\t<[]Object>\n     List of Bars and their specs.\n\n"
Jan  7 05:40:36.053: INFO: Running '/home/prow/go/src/k8s.io/kubernetes/bazel-bin/cmd/kubectl/linux_amd64_pure_stripped/kubectl --server=https://127.0.0.1:32768 --kubeconfig=/root/.kube/kind-test-config explain e2e-test-crd-publish-openapi-6907-crds.spec.bars'
Jan  7 05:40:36.284: INFO: stderr: ""
Jan  7 05:40:36.284: INFO: stdout: "KIND:     E2e-test-crd-publish-openapi-6907-crd\nVERSION:  crd-publish-openapi-test-foo.example.com/v1\n\nRESOURCE: bars <[]Object>\n\nDESCRIPTION:\n     List of Bars and their specs.\n\nFIELDS:\n   age\t<string>\n     Age of Bar.\n\n   bazs\t<[]string>\n     List of Bazs.\n\n   name\t<string> -required-\n     Name of Bar.\n\n"
STEP: kubectl explain works to return error when explain is called on property that doesn't exist
Jan  7 05:40:36.284: INFO: Running '/home/prow/go/src/k8s.io/kubernetes/bazel-bin/cmd/kubectl/linux_amd64_pure_stripped/kubectl --server=https://127.0.0.1:32768 --kubeconfig=/root/.kube/kind-test-config explain e2e-test-crd-publish-openapi-6907-crds.spec.bars2'
Jan  7 05:40:36.555: INFO: rc: 1
[AfterEach] [sig-api-machinery] CustomResourcePublishOpenAPI [Privileged:ClusterAdmin]
  test/e2e/framework/framework.go:175
Jan  7 05:40:38.794: INFO: Waiting up to 3m0s for all (but 0) nodes to be ready
STEP: Destroying namespace "crd-publish-openapi-8357" for this suite.
... skipping 2 lines ...
• [SLOW TEST:8.134 seconds]
[sig-api-machinery] CustomResourcePublishOpenAPI [Privileged:ClusterAdmin]
test/e2e/apimachinery/framework.go:23
  works for CRD with validation schema [Conformance]
  test/e2e/framework/framework.go:685
------------------------------
{"msg":"PASSED [sig-api-machinery] CustomResourcePublishOpenAPI [Privileged:ClusterAdmin] works for CRD with validation schema [Conformance]","total":-1,"completed":4,"skipped":39,"failed":0}

SSSSSSSSSSSSSSSSSS
------------------------------
[BeforeEach] [Testpattern: Pre-provisioned PV (default fs)] subPath
  test/e2e/storage/testsuites/base.go:94
[BeforeEach] [Testpattern: Pre-provisioned PV (default fs)] subPath
... skipping 60 lines ...
  test/e2e/storage/in_tree_volumes.go:70
    [Testpattern: Pre-provisioned PV (default fs)] subPath
    test/e2e/storage/testsuites/base.go:93
      should support non-existent path
      test/e2e/storage/testsuites/subpath.go:191
------------------------------
{"msg":"PASSED [sig-storage] In-tree Volumes [Driver: local][LocalVolumeType: dir-link-bindmounted] [Testpattern: Pre-provisioned PV (default fs)] subPath should support non-existent path","total":-1,"completed":3,"skipped":9,"failed":0}

SS
------------------------------
[BeforeEach] [sig-apps] Deployment
  test/e2e/framework/framework.go:174
STEP: Creating a kubernetes client
... skipping 36 lines ...
• [SLOW TEST:12.230 seconds]
[sig-apps] Deployment
test/e2e/apps/framework.go:23
  RecreateDeployment should delete old pods and create new ones [Conformance]
  test/e2e/framework/framework.go:685
------------------------------
{"msg":"PASSED [sig-apps] Deployment RecreateDeployment should delete old pods and create new ones [Conformance]","total":-1,"completed":3,"skipped":38,"failed":0}
[BeforeEach] [Testpattern: Pre-provisioned PV (filesystem volmode)] volumeMode
  test/e2e/storage/testsuites/base.go:94
Jan  7 05:40:40.549: INFO: Only supported for providers [vsphere] (not skeleton)
[AfterEach] [Testpattern: Pre-provisioned PV (filesystem volmode)] volumeMode
  test/e2e/framework/framework.go:175
Jan  7 05:40:40.550: INFO: Waiting up to 3m0s for all (but 0) nodes to be ready
... skipping 50 lines ...
• [SLOW TEST:8.428 seconds]
[sig-api-machinery] CustomResourcePublishOpenAPI [Privileged:ClusterAdmin]
test/e2e/apimachinery/framework.go:23
  works for CRD without validation schema [Conformance]
  test/e2e/framework/framework.go:685
------------------------------
{"msg":"PASSED [sig-api-machinery] CustomResourcePublishOpenAPI [Privileged:ClusterAdmin] works for CRD without validation schema [Conformance]","total":-1,"completed":4,"skipped":18,"failed":0}

SSS
------------------------------
[BeforeEach] [Testpattern: Inline-volume (ext4)] volumes
  test/e2e/storage/testsuites/base.go:94
Jan  7 05:40:40.820: INFO: Driver emptydir doesn't support ext4 -- skipping
... skipping 90 lines ...
  test/e2e/storage/in_tree_volumes.go:70
    [Testpattern: Pre-provisioned PV (default fs)] subPath
    test/e2e/storage/testsuites/base.go:93
      should support readOnly file specified in the volumeMount [LinuxOnly]
      test/e2e/storage/testsuites/subpath.go:376
------------------------------
{"msg":"PASSED [sig-storage] In-tree Volumes [Driver: local][LocalVolumeType: tmpfs] [Testpattern: Pre-provisioned PV (default fs)] subPath should support readOnly file specified in the volumeMount [LinuxOnly]","total":-1,"completed":2,"skipped":4,"failed":0}

SSS
------------------------------
[BeforeEach] [Testpattern: Inline-volume (ext3)] volumes
  test/e2e/storage/testsuites/base.go:94
Jan  7 05:40:41.760: INFO: Only supported for providers [azure] (not skeleton)
... skipping 53 lines ...
test/e2e/common/empty_dir.go:40
  when FSGroup is specified [LinuxOnly] [NodeFeature:FSGroup]
  test/e2e/common/empty_dir.go:43
    nonexistent volume subPath should have the correct mode and owner using FSGroup
    test/e2e/common/empty_dir.go:58
------------------------------
{"component":"entrypoint","file":"prow/entrypoint/run.go:168","func":"k8s.io/test-infra/prow/entrypoint.Options.ExecuteProcess","level":"error","msg":"Entrypoint received interrupt: terminated","time":"2020-01-07T05:40:42Z"}