This job view page is being replaced by Spyglass soon. Check out the new job view.
ResultFAILURE
Tests 36 failed / 656 succeeded
Started2020-09-19 17:19
Elapsed53m23s
Revision
job-versionv1.16.15
revisionv1.16.15

Test Failures


Kubernetes e2e suite [k8s.io] NodeLease when the NodeLease feature is enabled the kubelet should report node status infrequently 1m12s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[k8s\.io\]\sNodeLease\swhen\sthe\sNodeLease\sfeature\sis\senabled\sthe\skubelet\sshould\sreport\snode\sstatus\sinfrequently$'
/workspace/anago-v1.16.15-rc.0.27+5ee4e161ecc8bd/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/common/node_lease.go:88
Sep 19 17:33:18.866: Expected
    <*url.Error | 0xc003744d50>: {
        Op: "Get",
        URL: "https://api.e2e-kops-cilium-flatcar-k16.test-cncf-aws.k8s.io/api/v1/nodes/ip-172-20-39-55.sa-east-1.compute.internal",
        Err: {
            Op: "dial",
            Net: "tcp",
            Source: nil,
            Addr: {
                IP: [18, 231, 108, 105],
                Port: 443,
                Zone: "",
            },
            Err: {Syscall: "connect", Err: 0x6f},
        },
    }
to be nil
/workspace/anago-v1.16.15-rc.0.27+5ee4e161ecc8bd/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/common/node_lease.go:165
				
				Click to see stdout/stderrfrom junit_21.xml

Filter through log files


Kubernetes e2e suite [k8s.io] Probing container should *not* be restarted with a exec "cat /tmp/health" liveness probe [NodeConformance] [Conformance] 1m27s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[k8s\.io\]\sProbing\scontainer\sshould\s\*not\*\sbe\srestarted\swith\sa\sexec\s\"cat\s\/tmp\/health\"\sliveness\sprobe\s\[NodeConformance\]\s\[Conformance\]$'
/workspace/anago-v1.16.15-rc.0.27+5ee4e161ecc8bd/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/framework/framework.go:698
Sep 19 17:33:19.219: getting pod 
Unexpected error:
    <*url.Error | 0xc0023e2f90>: {
        Op: "Get",
        URL: "https://api.e2e-kops-cilium-flatcar-k16.test-cncf-aws.k8s.io/api/v1/namespaces/container-probe-5824/pods/busybox-17f6e772-d0f0-475e-918b-e07dafe30acf",
        Err: {
            Op: "dial",
            Net: "tcp",
            Source: nil,
            Addr: {
                IP: [18, 231, 108, 105],
                Port: 443,
                Zone: "",
            },
            Err: {Syscall: "connect", Err: 0x6f},
        },
    }
    Get https://api.e2e-kops-cilium-flatcar-k16.test-cncf-aws.k8s.io/api/v1/namespaces/container-probe-5824/pods/busybox-17f6e772-d0f0-475e-918b-e07dafe30acf: dial tcp 18.231.108.105:443: connect: connection refused
occurred
/workspace/anago-v1.16.15-rc.0.27+5ee4e161ecc8bd/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/common/container_probe.go:440
				
				Click to see stdout/stderrfrom junit_10.xml

Filter through log files


Kubernetes e2e suite [k8s.io] Probing container should *not* be restarted with a non-local redirect http liveness probe 1m27s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[k8s\.io\]\sProbing\scontainer\sshould\s\*not\*\sbe\srestarted\swith\sa\snon\-local\sredirect\shttp\sliveness\sprobe$'
/workspace/anago-v1.16.15-rc.0.27+5ee4e161ecc8bd/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/common/container_probe.go:247
Sep 19 17:33:19.585: getting pod 
Unexpected error:
    <*url.Error | 0xc003408ae0>: {
        Op: "Get",
        URL: "https://api.e2e-kops-cilium-flatcar-k16.test-cncf-aws.k8s.io/api/v1/namespaces/container-probe-6360/pods/liveness-d5c434c5-0847-4437-9b80-779db1488663",
        Err: {
            Op: "dial",
            Net: "tcp",
            Source: nil,
            Addr: {
                IP: [18, 231, 108, 105],
                Port: 443,
                Zone: "",
            },
            Err: {Syscall: "connect", Err: 0x6f},
        },
    }
    Get https://api.e2e-kops-cilium-flatcar-k16.test-cncf-aws.k8s.io/api/v1/namespaces/container-probe-6360/pods/liveness-d5c434c5-0847-4437-9b80-779db1488663: dial tcp 18.231.108.105:443: connect: connection refused
occurred
/workspace/anago-v1.16.15-rc.0.27+5ee4e161ecc8bd/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/common/container_probe.go:440
				
				Click to see stdout/stderrfrom junit_08.xml

Filter through log files


Kubernetes e2e suite [sig-api-machinery] CustomResourcePublishOpenAPI [Privileged:ClusterAdmin] removes definition from spec when one version gets changed to not be served [Conformance] 30s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[sig\-api\-machinery\]\sCustomResourcePublishOpenAPI\s\[Privileged\:ClusterAdmin\]\sremoves\sdefinition\sfrom\sspec\swhen\sone\sversion\sgets\schanged\sto\snot\sbe\sserved\s\[Conformance\]$'
/workspace/anago-v1.16.15-rc.0.27+5ee4e161ecc8bd/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/framework/framework.go:151
Sep 19 17:33:49.681: Unexpected error:
    <*errors.errorString | 0xc0000d9000>: {
        s: "timed out waiting for the condition",
    }
    timed out waiting for the condition
occurred
/workspace/anago-v1.16.15-rc.0.27+5ee4e161ecc8bd/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/framework/framework.go:218
				
				Click to see stdout/stderrfrom junit_01.xml

Filter through log files


Kubernetes e2e suite [sig-api-machinery] Garbage collector should orphan pods created by rc if deleteOptions.OrphanDependents is nil 47s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[sig\-api\-machinery\]\sGarbage\scollector\sshould\sorphan\spods\screated\sby\src\sif\sdeleteOptions\.OrphanDependents\sis\snil$'
/workspace/anago-v1.16.15-rc.0.27+5ee4e161ecc8bd/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/framework/framework.go:152
Sep 19 17:33:17.947: Couldn't delete ns: "gc-9020": Get https://api.e2e-kops-cilium-flatcar-k16.test-cncf-aws.k8s.io/apis/coordination.k8s.io/v1/namespaces/gc-9020/leases: unexpected EOF (&url.Error{Op:"Get", URL:"https://api.e2e-kops-cilium-flatcar-k16.test-cncf-aws.k8s.io/apis/coordination.k8s.io/v1/namespaces/gc-9020/leases", Err:(*errors.errorString)(0xc0000d2060)})
/workspace/anago-v1.16.15-rc.0.27+5ee4e161ecc8bd/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/framework/framework.go:336
				
				Click to see stdout/stderrfrom junit_02.xml

Filter through log files


Kubernetes e2e suite [sig-apps] CronJob should schedule multiple jobs concurrently 30s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[sig\-apps\]\sCronJob\sshould\sschedule\smultiple\sjobs\sconcurrently$'
/workspace/anago-v1.16.15-rc.0.27+5ee4e161ecc8bd/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/framework/framework.go:151
Sep 19 17:33:49.473: Unexpected error:
    <*errors.errorString | 0xc00009d010>: {
        s: "timed out waiting for the condition",
    }
    timed out waiting for the condition
occurred
/workspace/anago-v1.16.15-rc.0.27+5ee4e161ecc8bd/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/framework/framework.go:218
				
				Click to see stdout/stderrfrom junit_24.xml

Filter through log files


Kubernetes e2e suite [sig-apps] DisruptionController should block an eviction until the PDB is updated to allow it 35s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[sig\-apps\]\sDisruptionController\sshould\sblock\san\seviction\suntil\sthe\sPDB\sis\supdated\sto\sallow\sit$'
/workspace/anago-v1.16.15-rc.0.27+5ee4e161ecc8bd/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/apps/disruption.go:200
Sep 19 17:33:49.647: Unexpected error:
    <*url.Error | 0xc00324e000>: {
        Op: "Get",
        URL: "https://api.e2e-kops-cilium-flatcar-k16.test-cncf-aws.k8s.io/api/v1/namespaces/disruption-2992/pods",
        Err: {
            Op: "dial",
            Net: "tcp",
            Source: nil,
            Addr: {
                IP: [18, 231, 108, 105],
                Port: 443,
                Zone: "",
            },
            Err: {},
        },
    }
    Get https://api.e2e-kops-cilium-flatcar-k16.test-cncf-aws.k8s.io/api/v1/namespaces/disruption-2992/pods: dial tcp 18.231.108.105:443: i/o timeout
occurred
/workspace/anago-v1.16.15-rc.0.27+5ee4e161ecc8bd/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/apps/disruption.go:207
				
				Click to see stdout/stderrfrom junit_06.xml

Filter through log files


Kubernetes e2e suite [sig-cli] Kubectl client Update Demo should create and stop a replication controller [Conformance] 30s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[sig\-cli\]\sKubectl\sclient\sUpdate\sDemo\sshould\screate\sand\sstop\sa\sreplication\scontroller\s\s\[Conformance\]$'
/workspace/anago-v1.16.15-rc.0.27+5ee4e161ecc8bd/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/framework/framework.go:151
Sep 19 17:33:48.830: Unexpected error:
    <*errors.errorString | 0xc0000d3000>: {
        s: "timed out waiting for the condition",
    }
    timed out waiting for the condition
occurred
/workspace/anago-v1.16.15-rc.0.27+5ee4e161ecc8bd/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/framework/framework.go:218
				
				Click to see stdout/stderrfrom junit_02.xml

Filter through log files


Kubernetes e2e suite [sig-cli] Kubectl client Update Demo should do a rolling update of a replication controller [Conformance] 20s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[sig\-cli\]\sKubectl\sclient\sUpdate\sDemo\sshould\sdo\sa\srolling\supdate\sof\sa\sreplication\scontroller\s\s\[Conformance\]$'
/workspace/anago-v1.16.15-rc.0.27+5ee4e161ecc8bd/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/framework/framework.go:698
Sep 19 17:33:18.528: Unexpected error:
    <exec.CodeExitError>: {
        Err: {
            s: "error running /workspace/kubernetes/platforms/linux/amd64/kubectl --server=https://api.e2e-kops-cilium-flatcar-k16.test-cncf-aws.k8s.io --kubeconfig=/tmp/kops624157852/kubeconfig get pods -o template --template={{range.items}}{{.metadata.name}} {{end}} -l name=update-demo --namespace=kubectl-5164:\nCommand stdout:\n\nstderr:\nThe connection to the server api.e2e-kops-cilium-flatcar-k16.test-cncf-aws.k8s.io was refused - did you specify the right host or port?\n\nerror:\nexit status 1",
        },
        Code: 1,
    }
    error running /workspace/kubernetes/platforms/linux/amd64/kubectl --server=https://api.e2e-kops-cilium-flatcar-k16.test-cncf-aws.k8s.io --kubeconfig=/tmp/kops624157852/kubeconfig get pods -o template --template={{range.items}}{{.metadata.name}} {{end}} -l name=update-demo --namespace=kubectl-5164:
    Command stdout:
    
    stderr:
    The connection to the server api.e2e-kops-cilium-flatcar-k16.test-cncf-aws.k8s.io was refused - did you specify the right host or port?
    
    error:
    exit status 1
occurred
/workspace/anago-v1.16.15-rc.0.27+5ee4e161ecc8bd/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/framework/util.go:1539
				
				Click to see stdout/stderrfrom junit_05.xml

Filter through log files


Kubernetes e2e suite [sig-network] Network should set TCP CLOSE_WAIT timeout 1m22s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[sig\-network\]\sNetwork\sshould\sset\sTCP\sCLOSE\_WAIT\stimeout$'
/workspace/anago-v1.16.15-rc.0.27+5ee4e161ecc8bd/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/network/kube_proxy.go:54
Sep 19 17:32:40.727: Unexpected error:
    <*strconv.NumError | 0xc001fee4e0>: {
        Func: "Atoi",
        Num: "",
        Err: {s: "invalid syntax"},
    }
    strconv.Atoi: parsing "": invalid syntax
occurred
/workspace/anago-v1.16.15-rc.0.27+5ee4e161ecc8bd/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/network/kube_proxy.go:208
				
				Click to see stdout/stderrfrom junit_17.xml

Filter through log files


Kubernetes e2e suite [sig-network] Networking should check kube-proxy urls 14s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[sig\-network\]\sNetworking\sshould\scheck\skube\-proxy\surls$'
/workspace/anago-v1.16.15-rc.0.27+5ee4e161ecc8bd/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/network/networking.go:90
Sep 19 17:33:18.340: Unexpected error:
    <*url.Error | 0xc002b777d0>: {
        Op: "Get",
        URL: "https://api.e2e-kops-cilium-flatcar-k16.test-cncf-aws.k8s.io/api/v1/namespaces/nettest-6886/pods/netserver-0",
        Err: {
            Op: "dial",
            Net: "tcp",
            Source: nil,
            Addr: {
                IP: [18, 231, 108, 105],
                Port: 443,
                Zone: "",
            },
            Err: {Syscall: "connect", Err: 0x6f},
        },
    }
    Get https://api.e2e-kops-cilium-flatcar-k16.test-cncf-aws.k8s.io/api/v1/namespaces/nettest-6886/pods/netserver-0: dial tcp 18.231.108.105:443: connect: connection refused
occurred
/workspace/anago-v1.16.15-rc.0.27+5ee4e161ecc8bd/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/framework/networking_utils.go:660
				
				Click to see stdout/stderrfrom junit_24.xml

Filter through log files


Kubernetes e2e suite [sig-network] Proxy version v1 should proxy through a service and a pod [Conformance] 30s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[sig\-network\]\sProxy\sversion\sv1\sshould\sproxy\sthrough\sa\sservice\sand\sa\spod\s\s\[Conformance\]$'
/workspace/anago-v1.16.15-rc.0.27+5ee4e161ecc8bd/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/framework/framework.go:151
Sep 19 17:33:49.515: Unexpected error:
    <*errors.errorString | 0xc0000d5000>: {
        s: "timed out waiting for the condition",
    }
    timed out waiting for the condition
occurred
/workspace/anago-v1.16.15-rc.0.27+5ee4e161ecc8bd/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/framework/framework.go:218
				
				Click to see stdout/stderrfrom junit_03.xml

Filter through log files


Kubernetes e2e suite [sig-storage] CSI Volumes [Driver: csi-hostpath] [Testpattern: Dynamic PV (block volmode)] volume-expand should not allow expansion of pvcs without AllowVolumeExpansion property 5m45s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[sig\-storage\]\sCSI\sVolumes\s\[Driver\:\scsi\-hostpath\]\s\[Testpattern\:\sDynamic\sPV\s\(block\svolmode\)\]\svolume\-expand\sshould\snot\sallow\sexpansion\sof\spvcs\swithout\sAllowVolumeExpansion\sproperty$'
/workspace/anago-v1.16.15-rc.0.27+5ee4e161ecc8bd/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/volume_expand.go:139
Sep 19 17:57:12.899: Unexpected error:
    <*errors.errorString | 0xc0020c35f0>: {
        s: "PersistentVolumeClaims [csi-hostpath45fb9] not all in phase Bound within 5m0s",
    }
    PersistentVolumeClaims [csi-hostpath45fb9] not all in phase Bound within 5m0s
occurred
/workspace/anago-v1.16.15-rc.0.27+5ee4e161ecc8bd/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/base.go:366
				
				Click to see stdout/stderrfrom junit_15.xml

Filter through log files


Kubernetes e2e suite [sig-storage] CSI Volumes [Driver: csi-hostpath] [Testpattern: Dynamic PV (block volmode)] volumes should store data 5m45s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[sig\-storage\]\sCSI\sVolumes\s\[Driver\:\scsi\-hostpath\]\s\[Testpattern\:\sDynamic\sPV\s\(block\svolmode\)\]\svolumes\sshould\sstore\sdata$'
/workspace/anago-v1.16.15-rc.0.27+5ee4e161ecc8bd/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/volumes.go:146
Sep 19 17:52:43.804: Unexpected error:
    <*errors.errorString | 0xc003071640>: {
        s: "PersistentVolumeClaims [csi-hostpathggnkl] not all in phase Bound within 5m0s",
    }
    PersistentVolumeClaims [csi-hostpathggnkl] not all in phase Bound within 5m0s
occurred
/workspace/anago-v1.16.15-rc.0.27+5ee4e161ecc8bd/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/base.go:366
				
				Click to see stdout/stderrfrom junit_24.xml

Filter through log files


Kubernetes e2e suite [sig-storage] CSI Volumes [Driver: csi-hostpath] [Testpattern: Dynamic PV (default fs)(allowExpansion)] volume-expand should resize volume when PVC is edited while pod is using it 5m45s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[sig\-storage\]\sCSI\sVolumes\s\[Driver\:\scsi\-hostpath\]\s\[Testpattern\:\sDynamic\sPV\s\(default\sfs\)\(allowExpansion\)\]\svolume\-expand\sshould\sresize\svolume\swhen\sPVC\sis\sedited\swhile\spod\sis\susing\sit$'
/workspace/anago-v1.16.15-rc.0.27+5ee4e161ecc8bd/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/volume_expand.go:218
Sep 19 17:47:06.627: Unexpected error:
    <*errors.errorString | 0xc002c99860>: {
        s: "PersistentVolumeClaims [csi-hostpathnnx44] not all in phase Bound within 5m0s",
    }
    PersistentVolumeClaims [csi-hostpathnnx44] not all in phase Bound within 5m0s
occurred
/workspace/anago-v1.16.15-rc.0.27+5ee4e161ecc8bd/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/base.go:366
				
				Click to see stdout/stderrfrom junit_17.xml

Filter through log files


Kubernetes e2e suite [sig-storage] CSI Volumes [Driver: csi-hostpath] [Testpattern: Dynamic PV (default fs)] provisioning should provision storage with pvc data source 15m39s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[sig\-storage\]\sCSI\sVolumes\s\[Driver\:\scsi\-hostpath\]\s\[Testpattern\:\sDynamic\sPV\s\(default\sfs\)\]\sprovisioning\sshould\sprovision\sstorage\swith\spvc\sdata\ssource$'
/workspace/anago-v1.16.15-rc.0.27+5ee4e161ecc8bd/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/provisioning.go:207
Sep 19 18:07:03.310: Unexpected error:
    <*errors.errorString | 0xc001a79920>: {
        s: "Gave up after waiting 15m0s for pod \"pvc-datasource-writer-fvcch\" to be \"success or failure\"",
    }
    Gave up after waiting 15m0s for pod "pvc-datasource-writer-fvcch" to be "success or failure"
occurred
/workspace/anago-v1.16.15-rc.0.27+5ee4e161ecc8bd/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/provisioning.go:537
				
				Click to see stdout/stderrfrom junit_03.xml

Find pvc-datasource-writer-fvcch mentions in log files


Kubernetes e2e suite [sig-storage] CSI Volumes [Driver: csi-hostpath] [Testpattern: Dynamic PV (default fs)] subPath should support existing directories when readOnly specified in the volumeSource 5m46s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[sig\-storage\]\sCSI\sVolumes\s\[Driver\:\scsi\-hostpath\]\s\[Testpattern\:\sDynamic\sPV\s\(default\sfs\)\]\ssubPath\sshould\ssupport\sexisting\sdirectories\swhen\sreadOnly\sspecified\sin\sthe\svolumeSource$'
/workspace/anago-v1.16.15-rc.0.27+5ee4e161ecc8bd/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/subpath.go:377
Sep 19 17:42:43.029: Unexpected error:
    <*errors.errorString | 0xc00209aca0>: {
        s: "PersistentVolumeClaims [csi-hostpathm8zdv] not all in phase Bound within 5m0s",
    }
    PersistentVolumeClaims [csi-hostpathm8zdv] not all in phase Bound within 5m0s
occurred
/workspace/anago-v1.16.15-rc.0.27+5ee4e161ecc8bd/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/base.go:366
				
				Click to see stdout/stderrfrom junit_03.xml

Filter through log files


Kubernetes e2e suite [sig-storage] CSI Volumes [Driver: csi-hostpath] [Testpattern: Dynamic PV (default fs)] subPath should support non-existent path 5m45s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[sig\-storage\]\sCSI\sVolumes\s\[Driver\:\scsi\-hostpath\]\s\[Testpattern\:\sDynamic\sPV\s\(default\sfs\)\]\ssubPath\sshould\ssupport\snon\-existent\spath$'
/workspace/anago-v1.16.15-rc.0.27+5ee4e161ecc8bd/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/subpath.go:177
Sep 19 17:57:43.107: Unexpected error:
    <*errors.errorString | 0xc0028b62e0>: {
        s: "PersistentVolumeClaims [csi-hostpathl6lnw] not all in phase Bound within 5m0s",
    }
    PersistentVolumeClaims [csi-hostpathl6lnw] not all in phase Bound within 5m0s
occurred
/workspace/anago-v1.16.15-rc.0.27+5ee4e161ecc8bd/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/base.go:366
				
				Click to see stdout/stderrfrom junit_23.xml

Filter through log files


Kubernetes e2e suite [sig-storage] CSI Volumes [Driver: csi-hostpath] [Testpattern: Dynamic PV (default fs)] subPath should support readOnly file specified in the volumeMount [LinuxOnly] 5m45s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[sig\-storage\]\sCSI\sVolumes\s\[Driver\:\scsi\-hostpath\]\s\[Testpattern\:\sDynamic\sPV\s\(default\sfs\)\]\ssubPath\sshould\ssupport\sreadOnly\sfile\sspecified\sin\sthe\svolumeMount\s\[LinuxOnly\]$'
/workspace/anago-v1.16.15-rc.0.27+5ee4e161ecc8bd/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/subpath.go:362
Sep 19 17:51:39.565: Unexpected error:
    <*errors.errorString | 0xc0038eed60>: {
        s: "PersistentVolumeClaims [csi-hostpathhrkl5] not all in phase Bound within 5m0s",
    }
    PersistentVolumeClaims [csi-hostpathhrkl5] not all in phase Bound within 5m0s
occurred
/workspace/anago-v1.16.15-rc.0.27+5ee4e161ecc8bd/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/base.go:366