ci-kubernetes-e2e-autoscaling-vpa-updater #1640549573929734144
Recent runs || View in Spyglass
Kubernetes e2e suite [It] [sig-autoscaling] [VPA] [updater] [v1] Updater doesn't evict pods when Admission Controller status unavailable
Kubernetes e2e suite [It] [sig-autoscaling] [VPA] [updater] [v1] Updater evicts pods when Admission Controller status available
Kubernetes e2e suite [SynchronizedAfterSuite]
Kubernetes e2e suite [SynchronizedBeforeSuite]
kubetest
kubetest Check APIReachability
kubetest Deferred TearDown
kubetest DumpClusterLogs
kubetest Extract
kubetest GetDeployer
kubetest Prepare
kubetest TearDown
kubetest TearDown Previous
kubetest Timeout
kubetest Up
kubetest diffResources
kubetest list nodes
kubetest listResources After
kubetest listResources Before
kubetest listResources Down
kubetest listResources Up
kubetest test setup
Kubernetes e2e suite [It] [sig-autoscaling] [VPA] [actuation] [v1] Actuation applies recommendations only on restart when update mode is Initial
Kubernetes e2e suite [It] [sig-autoscaling] [VPA] [actuation] [v1] Actuation by default does not evict pods in a 1-Pod CronJob
Kubernetes e2e suite [It] [sig-autoscaling] [VPA] [actuation] [v1] Actuation by default does not evict pods in a 1-Pod Deployment
Kubernetes e2e suite [It] [sig-autoscaling] [VPA] [actuation] [v1] Actuation by default does not evict pods in a 1-Pod Job
Kubernetes e2e suite [It] [sig-autoscaling] [VPA] [actuation] [v1] Actuation by default does not evict pods in a 1-Pod ReplicaSet
Kubernetes e2e suite [It] [sig-autoscaling] [VPA] [actuation] [v1] Actuation by default does not evict pods in a 1-Pod ReplicationController
Kubernetes e2e suite [It] [sig-autoscaling] [VPA] [actuation] [v1] Actuation by default does not evict pods in a 1-Pod StatefulSet
Kubernetes e2e suite [It] [sig-autoscaling] [VPA] [actuation] [v1] Actuation does not act on injected sidecars
Kubernetes e2e suite [It] [sig-autoscaling] [VPA] [actuation] [v1] Actuation evicts pods in a multiple-replica CronJob
Kubernetes e2e suite [It] [sig-autoscaling] [VPA] [actuation] [v1] Actuation evicts pods in a multiple-replica Deployment
Kubernetes e2e suite [It] [sig-autoscaling] [VPA] [actuation] [v1] Actuation evicts pods in a multiple-replica Job
Kubernetes e2e suite [It] [sig-autoscaling] [VPA] [actuation] [v1] Actuation evicts pods in a multiple-replica ReplicaSet
Kubernetes e2e suite [It] [sig-autoscaling] [VPA] [actuation] [v1] Actuation evicts pods in a multiple-replica ReplicationController
Kubernetes e2e suite [It] [sig-autoscaling] [VPA] [actuation] [v1] Actuation evicts pods in a multiple-replica StatefulSet
Kubernetes e2e suite [It] [sig-autoscaling] [VPA] [actuation] [v1] Actuation never applies recommendations when update mode is Off
Kubernetes e2e suite [It] [sig-autoscaling] [VPA] [actuation] [v1] Actuation observes container max in LimitRange
Kubernetes e2e suite [It] [sig-autoscaling] [VPA] [actuation] [v1] Actuation observes container min in LimitRange
Kubernetes e2e suite [It] [sig-autoscaling] [VPA] [actuation] [v1] Actuation observes pod disruption budget
Kubernetes e2e suite [It] [sig-autoscaling] [VPA] [actuation] [v1] Actuation observes pod max in LimitRange
Kubernetes e2e suite [It] [sig-autoscaling] [VPA] [actuation] [v1] Actuation observes pod min in LimitRange
Kubernetes e2e suite [It] [sig-autoscaling] [VPA] [actuation] [v1] Actuation stops when pods get pending
Kubernetes e2e suite [It] [sig-autoscaling] [VPA] [actuation] [v1] Actuation when configured, evicts pods in a 1-Pod CronJob
Kubernetes e2e suite [It] [sig-autoscaling] [VPA] [actuation] [v1] Actuation when configured, evicts pods in a 1-Pod Deployment
Kubernetes e2e suite [It] [sig-autoscaling] [VPA] [actuation] [v1] Actuation when configured, evicts pods in a 1-Pod Job
Kubernetes e2e suite [It] [sig-autoscaling] [VPA] [actuation] [v1] Actuation when configured, evicts pods in a 1-Pod ReplicaSet
Kubernetes e2e suite [It] [sig-autoscaling] [VPA] [actuation] [v1] Actuation when configured, evicts pods in a 1-Pod ReplicationController
Kubernetes e2e suite [It] [sig-autoscaling] [VPA] [actuation] [v1] Actuation when configured, evicts pods in a 1-Pod StatefulSet
Kubernetes e2e suite [It] [sig-autoscaling] [VPA] [admission-controller] [v1] Admission-controller accepts valid and rejects invalid VPA object
Kubernetes e2e suite [It] [sig-autoscaling] [VPA] [admission-controller] [v1] Admission-controller caps request according to container max limit set in LimitRange
Kubernetes e2e suite [It] [sig-autoscaling] [VPA] [admission-controller] [v1] Admission-controller caps request according to pod max limit set in LimitRange
Kubernetes e2e suite [It] [sig-autoscaling] [VPA] [admission-controller] [v1] Admission-controller caps request to max set in VPA
Kubernetes e2e suite [It] [sig-autoscaling] [VPA] [admission-controller] [v1] Admission-controller doesn't block patches
Kubernetes e2e suite [It] [sig-autoscaling] [VPA] [admission-controller] [v1] Admission-controller keeps limits equal to request
Kubernetes e2e suite [It] [sig-autoscaling] [VPA] [admission-controller] [v1] Admission-controller keeps limits to request ratio constant
Kubernetes e2e suite [It] [sig-autoscaling] [VPA] [admission-controller] [v1] Admission-controller keeps limits unchanged when container controlled values is requests only
Kubernetes e2e suite [It] [sig-autoscaling] [VPA] [admission-controller] [v1] Admission-controller leaves users request when no recommendation
Kubernetes e2e suite [It] [sig-autoscaling] [VPA] [admission-controller] [v1] Admission-controller passes empty request when no recommendation and no user-specified request
Kubernetes e2e suite [It] [sig-autoscaling] [VPA] [admission-controller] [v1] Admission-controller raises request according to container min limit set in LimitRange
Kubernetes e2e suite [It] [sig-autoscaling] [VPA] [admission-controller] [v1] Admission-controller raises request according to pod min limit set in LimitRange
Kubernetes e2e suite [It] [sig-autoscaling] [VPA] [admission-controller] [v1] Admission-controller raises request to min set in VPA
Kubernetes e2e suite [It] [sig-autoscaling] [VPA] [admission-controller] [v1] Admission-controller starts pod with default request when one container has a recommendation and one other one doesn't when a limit range applies
Kubernetes e2e suite [It] [sig-autoscaling] [VPA] [admission-controller] [v1] Admission-controller starts pod with recommendation when one container has a recommendation and one other one doesn't
Kubernetes e2e suite [It] [sig-autoscaling] [VPA] [admission-controller] [v1] Admission-controller starts pods with default request when recommendation includes an extra container when a limit range applies
Kubernetes e2e suite [It] [sig-autoscaling] [VPA] [admission-controller] [v1] Admission-controller starts pods with new recommended request
Kubernetes e2e suite [It] [sig-autoscaling] [VPA] [admission-controller] [v1] Admission-controller starts pods with new recommended request when recommendation includes an extra container
Kubernetes e2e suite [It] [sig-autoscaling] [VPA] [admission-controller] [v1] Admission-controller starts pods with old recommended request when recommendation has only a container that doesn't match
Kubernetes e2e suite [It] [sig-autoscaling] [VPA] [admission-controller] [v1] Admission-controller starts pods with old recommended request when recommendation has only a container that doesn't match when a limit range applies
Kubernetes e2e suite [It] [sig-autoscaling] [VPA] [full-vpa] [v1] OOMing pods under VPA have memory requests growing with OOMs
Kubernetes e2e suite [It] [sig-autoscaling] [VPA] [full-vpa] [v1] Pods under VPA have cpu requests growing with usage
Kubernetes e2e suite [It] [sig-autoscaling] [VPA] [full-vpa] [v1] Pods under VPA have memory requests growing with usage
Kubernetes e2e suite [It] [sig-autoscaling] [VPA] [full-vpa] [v1] Pods under VPA with default recommender explicitly configured have cpu requests growing with usage
Kubernetes e2e suite [It] [sig-autoscaling] [VPA] [full-vpa] [v1] Pods under VPA with non-recognized recommender explicitly configured deployment not updated by non-recognized recommender
Kubernetes e2e suite [It] [sig-autoscaling] [VPA] [recommender] [v1] Checkpoints with missing VPA objects are garbage collected
Kubernetes e2e suite [It] [sig-autoscaling] [VPA] [recommender] [v1] VPA CRD object doesn't drop lower/upper after recommender's restart
Kubernetes e2e suite [It] [sig-autoscaling] [VPA] [recommender] [v1] VPA CRD object only containers not-opted-out get recommendations
Kubernetes e2e suite [It] [sig-autoscaling] [VPA] [recommender] [v1] VPA CRD object respects max allowed recommendation
Kubernetes e2e suite [It] [sig-autoscaling] [VPA] [recommender] [v1] VPA CRD object respects min allowed recommendation
Kubernetes e2e suite [It] [sig-autoscaling] [VPA] [recommender] [v1] VPA CRD object serves recommendation
Kubernetes e2e suite [It] [sig-autoscaling] [VPA] [recommender] [v1] VPA CRD object serves recommendation for CronJob
Kubernetes e2e suite [It] [sig-autoscaling] [VPA] [recommender] [v1] VPA CRD object with no containers opted out all containers get recommendations
Kubernetes e2e suite [It] [sig-network] Networking Granular Checks: Pods should function for intra-pod communication: http [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-network] Networking Granular Checks: Pods should function for intra-pod communication: sctp [LinuxOnly][Feature:SCTPConnectivity][Disruptive]
Kubernetes e2e suite [It] [sig-network] Networking Granular Checks: Pods should function for intra-pod communication: udp [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-network] Networking Granular Checks: Pods should function for node-pod communication: http [LinuxOnly] [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-network] Networking Granular Checks: Pods should function for node-pod communication: sctp [LinuxOnly][Feature:SCTPConnectivity][Disruptive]
Kubernetes e2e suite [It] [sig-network] Networking Granular Checks: Pods should function for node-pod communication: udp [LinuxOnly] [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-node] ConfigMap should be consumable via environment variable [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-node] ConfigMap should be consumable via the environment [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-node] ConfigMap should fail to create ConfigMap with empty key [Conformance]
Kubernetes e2e suite [It] [sig-node] ConfigMap should run through a ConfigMap lifecycle [Conformance]
Kubernetes e2e suite [It] [sig-node] ConfigMap should update ConfigMap successfully
Kubernetes e2e suite [It] [sig-node] Container Lifecycle Hook when create a pod with lifecycle hook should execute poststart exec hook properly [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-node] Container Lifecycle Hook when create a pod with lifecycle hook should execute poststart http hook properly [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-node] Container Lifecycle Hook when create a pod with lifecycle hook should execute poststart https hook properly [MinimumKubeletVersion:1.23] [NodeConformance]
Kubernetes e2e suite [It] [sig-node] Container Lifecycle Hook when create a pod with lifecycle hook should execute prestop exec hook properly [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-node] Container Lifecycle Hook when create a pod with lifecycle hook should execute prestop http hook properly [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-node] Container Lifecycle Hook when create a pod with lifecycle hook should execute prestop https hook properly [MinimumKubeletVersion:1.23] [NodeConformance]
Kubernetes e2e suite [It] [sig-node] Container Runtime blackbox test on terminated container should report termination message as empty when pod succeeds and TerminationMessagePolicy FallbackToLogsOnError is set [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-node] Container Runtime blackbox test on terminated container should report termination message from file when pod succeeds and TerminationMessagePolicy FallbackToLogsOnError is set [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-node] Container Runtime blackbox test on terminated container should report termination message from log output if TerminationMessagePolicy FallbackToLogsOnError is set [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-node] Container Runtime blackbox test on terminated container should report termination message if TerminationMessagePath is set [NodeConformance]
Kubernetes e2e suite [It] [sig-node] Container Runtime blackbox test on terminated container should report termination message if TerminationMessagePath is set as non-root user and at a non-default path [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-node] Container Runtime blackbox test when running a container with a new image should be able to pull from private registry with secret [NodeConformance]
Kubernetes e2e suite [It] [sig-node] Container Runtime blackbox test when running a container with a new image should be able to pull image [NodeConformance]
Kubernetes e2e suite [It] [sig-node] Container Runtime blackbox test when running a container with a new image should not be able to pull from private registry without secret [NodeConformance]
Kubernetes e2e suite [It] [sig-node] Container Runtime blackbox test when running a container with a new image should not be able to pull image from invalid registry [NodeConformance]
Kubernetes e2e suite [It] [sig-node] Container Runtime blackbox test when starting a container that exits should run with the expected status [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-node] Containers should be able to override the image's default arguments (container cmd) [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-node] Containers should be able to override the image's default command (container entrypoint) [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-node] Containers should be able to override the image's default command and arguments [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-node] Containers should use the image defaults if command and args are blank [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-node] Downward API [Serial] [Disruptive] [NodeFeature:DownwardAPIHugePages] Downward API tests for hugepages should provide container's limits.hugepages-<pagesize> and requests.hugepages-<pagesize> as env vars
Kubernetes e2e suite [It] [sig-node] Downward API [Serial] [Disruptive] [NodeFeature:DownwardAPIHugePages] Downward API tests for hugepages should provide default limits.hugepages-<pagesize> from node allocatable
Kubernetes e2e suite [It] [sig-node] Downward API should provide container's limits.cpu/memory and requests.cpu/memory as env vars [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-node] Downward API should provide default limits.cpu/memory from node allocatable [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-node] Downward API should provide host IP and pod IP as an env var if pod uses host network [LinuxOnly]
Kubernetes e2e suite [It] [sig-node] Downward API should provide host IP as an env var [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-node] Downward API should provide pod UID as env vars [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-node] Downward API should provide pod name, namespace and IP address as env vars [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-node] Ephemeral Containers [NodeConformance] will start an ephemeral container in an existing pod [Conformance]
Kubernetes e2e suite [It] [sig-node] InitContainer [NodeConformance] should invoke init containers on a RestartAlways pod [Conformance]
Kubernetes e2e suite [It] [sig-node] InitContainer [NodeConformance] should invoke init containers on a RestartNever pod [Conformance]
Kubernetes e2e suite [It] [sig-node] InitContainer [NodeConformance] should not start app containers and fail the pod if init containers fail on a RestartNever pod [Conformance]
Kubernetes e2e suite [It] [sig-node] InitContainer [NodeConformance] should not start app containers if init containers fail on a RestartAlways pod [Conformance]
Kubernetes e2e suite [It] [sig-node] Kubelet when scheduling a busybox command in a pod should print the output to logs [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-node] Kubelet when scheduling a busybox command that always fails in a pod should be possible to delete [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-node] Kubelet when scheduling a busybox command that always fails in a pod should have an terminated reason [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-node] Kubelet when scheduling a read only busybox container should not write to root filesystem [LinuxOnly] [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-node] Kubelet when scheduling an agnhost Pod with hostAliases should write entries to /etc/hosts [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-node] KubeletManagedEtcHosts should test kubelet managed /etc/hosts file [LinuxOnly] [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-node] Lease lease API should be available [Conformance]
Kubernetes e2e suite [It] [sig-node] NodeLease NodeLease should have OwnerReferences set
Kubernetes e2e suite [It] [sig-node] NodeLease NodeLease the kubelet should create and update a lease in the kube-node-lease namespace
Kubernetes e2e suite [It] [sig-node] NodeLease NodeLease the kubelet should report node status infrequently
Kubernetes e2e suite [It] [sig-node] PodOSRejection [NodeConformance] Kubelet should reject pod when the node OS doesn't match pod's OS
Kubernetes e2e suite [It] [sig-node] PodTemplates should delete a collection of pod templates [Conformance]
Kubernetes e2e suite [It] [sig-node] PodTemplates should replace a pod template [Conformance]
Kubernetes e2e suite [It] [sig-node] PodTemplates should run the lifecycle of PodTemplates [Conformance]
Kubernetes e2e suite [It] [sig-node] Pods should allow activeDeadlineSeconds to be updated [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-node] Pods should be submitted and removed [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-node] Pods should be updated [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-node] Pods should cap back-off at MaxContainerBackOff [Slow][NodeConformance]
Kubernetes e2e suite [It] [sig-node] Pods should contain environment variables for services [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-node] Pods should delete a collection of pods [Conformance]
Kubernetes e2e suite [It] [sig-node] Pods should get a host IP [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-node] Pods should have their auto-restart back-off timer reset on image update [Slow][NodeConformance]
Kubernetes e2e suite [It] [sig-node] Pods should patch a pod status [Conformance]
Kubernetes e2e suite [It] [sig-node] Pods should run through the lifecycle of Pods and PodStatus [Conformance]
Kubernetes e2e suite [It] [sig-node] Pods should support pod readiness gates [NodeConformance]
Kubernetes e2e suite [It] [sig-node] Pods should support remote command execution over websockets [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-node] Pods should support retrieving logs from the container over websockets [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-node] PrivilegedPod [NodeConformance] should enable privileged commands [LinuxOnly]
Kubernetes e2e suite [It] [sig-node] Probing container should *not* be restarted by liveness probe because startup probe delays it
Kubernetes e2e suite [It] [sig-node] Probing container should *not* be restarted with a /healthz http liveness probe [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-node] Probing container should *not* be restarted with a GRPC liveness probe [NodeConformance]
Kubernetes e2e suite [It] [sig-node] Probing container should *not* be restarted with a exec "cat /tmp/health" liveness probe [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-node] Probing container should *not* be restarted with a non-local redirect http liveness probe
Kubernetes e2e suite [It] [sig-node] Probing container should *not* be restarted with a tcp:8080 liveness probe [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-node] Probing container should be ready immediately after startupProbe succeeds
Kubernetes e2e suite [It] [sig-node] Probing container should be restarted by liveness probe after startup probe enables it
Kubernetes e2e suite [It] [sig-node] Probing container should be restarted startup probe fails
Kubernetes e2e suite [It] [sig-node] Probing container should be restarted with a /healthz http liveness probe [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-node] Probing container should be restarted with a GRPC liveness probe [NodeConformance]
Kubernetes e2e suite [It] [sig-node] Probing container should be restarted with a exec "cat /tmp/health" liveness probe [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-node] Probing container should be restarted with a failing exec liveness probe that took longer than the timeout
Kubernetes e2e suite [It] [sig-node] Probing container should be restarted with a local redirect http liveness probe
Kubernetes e2e suite [It] [sig-node] Probing container should be restarted with an exec liveness probe with timeout [MinimumKubeletVersion:1.20] [NodeConformance]
Kubernetes e2e suite [It] [sig-node] Probing container should have monotonically increasing restart count [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-node] Probing container should mark readiness on pods to false and disable liveness probes while pod is in progress of terminating
Kubernetes e2e suite [It] [sig-node] Probing container should mark readiness on pods to false while pod is in progress of terminating when a pod has a readiness probe
Kubernetes e2e suite [It] [sig-node] Probing container should not be ready with an exec readiness probe timeout [MinimumKubeletVersion:1.20] [NodeConformance]
Kubernetes e2e suite [It] [sig-node] Probing container should override timeoutGracePeriodSeconds when LivenessProbe field is set [Feature:ProbeTerminationGracePeriod]
Kubernetes e2e suite [It] [sig-node] Probing container should override timeoutGracePeriodSeconds when StartupProbe field is set [Feature:ProbeTerminationGracePeriod]
Kubernetes e2e suite [It] [sig-node] Probing container with readiness probe should not be ready before initial delay and never restart [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-node] Probing container with readiness probe that fails should never be ready and never restart [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-node] RuntimeClass should support RuntimeClasses API operations [Conformance]
Kubernetes e2e suite [It] [sig-node] RuntimeClass should reject a Pod requesting a RuntimeClass with an unconfigured handler [NodeFeature:RuntimeHandler]
Kubernetes e2e suite [It] [sig-node] RuntimeClass should reject a Pod requesting a deleted RuntimeClass [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-node] RuntimeClass should reject a Pod requesting a non-existent RuntimeClass [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-node] RuntimeClass should run a Pod requesting a RuntimeClass with a configured handler [NodeFeature:RuntimeHandler]
Kubernetes e2e suite [It] [sig-node] RuntimeClass should schedule a Pod requesting a RuntimeClass and initialize its Overhead [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-node] RuntimeClass should schedule a Pod requesting a RuntimeClass without PodOverhead [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-node] Secrets should be consumable from pods in env vars [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-node] Secrets should be consumable via the environment [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-node] Secrets should fail to create secret due to empty secret key [Conformance]
Kubernetes e2e suite [It] [sig-node] Secrets should patch a secret [Conformance]
Kubernetes e2e suite [It] [sig-node] Security Context When creating a container with runAsNonRoot should not run with an explicit root user ID [LinuxOnly]
Kubernetes e2e suite [It] [sig-node] Security Context When creating a container with runAsNonRoot should not run without a specified user ID
Kubernetes e2e suite [It] [sig-node] Security Context When creating a container with runAsNonRoot should run with an explicit non-root user ID [LinuxOnly]
Kubernetes e2e suite [It] [sig-node] Security Context When creating a container with runAsNonRoot should run with an image specified user ID
Kubernetes e2e suite [It] [sig-node] Security Context When creating a container with runAsUser should run the container with uid 0 [LinuxOnly] [NodeConformance]
Kubernetes e2e suite [It] [sig-node] Security Context When creating a container with runAsUser should run the container with uid 65534 [LinuxOnly] [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-node] Security Context When creating a pod with HostUsers must create the user namespace if set to false [LinuxOnly] [Feature:UserNamespacesStatelessPodsSupport]
Kubernetes e2e suite [It] [sig-node] Security Context When creating a pod with HostUsers must not create the user namespace if set to true [LinuxOnly] [Feature:UserNamespacesStatelessPodsSupport]
Kubernetes e2e suite [It] [sig-node] Security Context When creating a pod with HostUsers should mount all volumes with proper permissions with hostUsers=false [LinuxOnly] [Feature:UserNamespacesStatelessPodsSupport]
Kubernetes e2e suite [It] [sig-node] Security Context When creating a pod with HostUsers should set FSGroup to user inside the container with hostUsers=false [LinuxOnly] [Feature:UserNamespacesStatelessPodsSupport]
Kubernetes e2e suite [It] [sig-node] Security Context When creating a pod with privileged should run the container as privileged when true [LinuxOnly] [NodeFeature:HostAccess]
Kubernetes e2e suite [It] [sig-node] Security Context When creating a pod with privileged should run the container as unprivileged when false [LinuxOnly] [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-node] Security Context When creating a pod with readOnlyRootFilesystem should run the container with readonly rootfs when readOnlyRootFilesystem=true [LinuxOnly] [NodeConformance]
Kubernetes e2e suite [It] [sig-node] Security Context When creating a pod with readOnlyRootFilesystem should run the container with writable rootfs when readOnlyRootFilesystem=false [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-node] Security Context when creating containers with AllowPrivilegeEscalation should allow privilege escalation when not explicitly set and uid != 0 [LinuxOnly] [NodeConformance]
Kubernetes e2e suite [It] [sig-node] Security Context when creating containers with AllowPrivilegeEscalation should allow privilege escalation when true [LinuxOnly] [NodeConformance]
Kubernetes e2e suite [It] [sig-node] Security Context when creating containers with AllowPrivilegeEscalation should not allow privilege escalation when false [LinuxOnly] [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-node] Sysctls [LinuxOnly] [NodeConformance] should not launch unsafe, but not explicitly enabled sysctls on the node [MinimumKubeletVersion:1.21]
Kubernetes e2e suite [It] [sig-node] Sysctls [LinuxOnly] [NodeConformance] should reject invalid sysctls [MinimumKubeletVersion:1.21] [Conformance]
Kubernetes e2e suite [It] [sig-node] Sysctls [LinuxOnly] [NodeConformance] should support sysctls [MinimumKubeletVersion:1.21] [Conformance]
Kubernetes e2e suite [It] [sig-node] Sysctls [LinuxOnly] [NodeConformance] should support sysctls with slashes as separator [MinimumKubeletVersion:1.23]
Kubernetes e2e suite [It] [sig-node] Variable Expansion should allow composing env vars into new env vars [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-node] Variable Expansion should allow substituting values in a container's args [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-node] Variable Expansion should allow substituting values in a container's command [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-node] Variable Expansion should allow substituting values in a volume subpath [Conformance]
Kubernetes e2e suite [It] [sig-node] Variable Expansion should fail substituting values in a volume subpath with absolute path [Slow] [Conformance]
Kubernetes e2e suite [It] [sig-node] Variable Expansion should fail substituting values in a volume subpath with backticks [Slow] [Conformance]
Kubernetes e2e suite [It] [sig-node] Variable Expansion should succeed in writing subpaths in container [Slow] [Conformance]
Kubernetes e2e suite [It] [sig-node] Variable Expansion should verify that a failing subpath expansion can be modified during the lifecycle of a container [Slow] [Conformance]
Kubernetes e2e suite [It] [sig-storage] ConfigMap Should fail non-optional pod creation due to configMap object does not exist [Slow]
Kubernetes e2e suite [It] [sig-storage] ConfigMap Should fail non-optional pod creation due to the key in the configMap object does not exist [Slow]
Kubernetes e2e suite [It] [sig-storage] ConfigMap binary data should be reflected in volume [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] ConfigMap optional updates should be reflected in volume [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] ConfigMap should be consumable from pods in volume [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] ConfigMap should be consumable from pods in volume as non-root [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] ConfigMap should be consumable from pods in volume as non-root with FSGroup [LinuxOnly] [NodeFeature:FSGroup]
Kubernetes e2e suite [It] [sig-storage] ConfigMap should be consumable from pods in volume as non-root with defaultMode and fsGroup set [LinuxOnly] [NodeFeature:FSGroup]
Kubernetes e2e suite [It] [sig-storage] ConfigMap should be consumable from pods in volume with defaultMode set [LinuxOnly] [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] ConfigMap should be consumable from pods in volume with mappings [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] ConfigMap should be consumable from pods in volume with mappings and Item mode set [LinuxOnly] [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] ConfigMap should be consumable from pods in volume with mappings as non-root [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] ConfigMap should be consumable from pods in volume with mappings as non-root with FSGroup [LinuxOnly] [NodeFeature:FSGroup]
Kubernetes e2e suite [It] [sig-storage] ConfigMap should be consumable in multiple volumes in the same pod [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] ConfigMap should be immutable if `immutable` field is set [Conformance]
Kubernetes e2e suite [It] [sig-storage] ConfigMap updates should be reflected in volume [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] Downward API [Serial] [Disruptive] [Feature:EphemeralStorage] Downward API tests for local ephemeral storage should provide container's limits.ephemeral-storage and requests.ephemeral-storage as env vars
Kubernetes e2e suite [It] [sig-storage] Downward API [Serial] [Disruptive] [Feature:EphemeralStorage] Downward API tests for local ephemeral storage should provide default limits.ephemeral-storage from node allocatable
Kubernetes e2e suite [It] [sig-storage] Downward API volume should provide container's cpu limit [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] Downward API volume should provide container's cpu request [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] Downward API volume should provide container's memory limit [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] Downward API volume should provide container's memory request [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] Downward API volume should provide node allocatable (cpu) as default cpu limit if the limit is not set [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] Downward API volume should provide node allocatable (memory) as default memory limit if the limit is not set [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] Downward API volume should provide podname as non-root with fsgroup [LinuxOnly] [NodeFeature:FSGroup]
Kubernetes e2e suite [It] [sig-storage] Downward API volume should provide podname as non-root with fsgroup and defaultMode [LinuxOnly] [NodeFeature:FSGroup]
Kubernetes e2e suite [It] [sig-storage] Downward API volume should provide podname only [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] Downward API volume should set DefaultMode on files [LinuxOnly] [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] Downward API volume should set mode on item file [LinuxOnly] [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] Downward API volume should update annotations on modification [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] Downward API volume should update labels on modification [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] EmptyDir volumes pod should support memory backed volumes of specified size
Kubernetes e2e suite [It] [sig-storage] EmptyDir volumes pod should support shared volumes between containers [Conformance]
Kubernetes e2e suite [It] [sig-storage] EmptyDir volumes should support (non-root,0644,default) [LinuxOnly] [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] EmptyDir volumes should support (non-root,0644,tmpfs) [LinuxOnly] [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] EmptyDir volumes should support (non-root,0666,default) [LinuxOnly] [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] EmptyDir volumes should support (non-root,0666,tmpfs) [LinuxOnly] [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] EmptyDir volumes should support (non-root,0777,default) [LinuxOnly] [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] EmptyDir volumes should support (non-root,0777,tmpfs) [LinuxOnly] [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] EmptyDir volumes should support (root,0644,default) [LinuxOnly] [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] EmptyDir volumes should support (root,0644,tmpfs) [LinuxOnly] [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] EmptyDir volumes should support (root,0666,default) [LinuxOnly] [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] EmptyDir volumes should support (root,0666,tmpfs) [LinuxOnly] [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] EmptyDir volumes should support (root,0777,default) [LinuxOnly] [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] EmptyDir volumes should support (root,0777,tmpfs) [LinuxOnly] [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] EmptyDir volumes volume on default medium should have the correct mode [LinuxOnly] [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] EmptyDir volumes volume on tmpfs should have the correct mode [LinuxOnly] [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] EmptyDir volumes when FSGroup is specified [LinuxOnly] [NodeFeature:FSGroup] files with FSGroup ownership should support (root,0644,tmpfs)
Kubernetes e2e suite [It] [sig-storage] EmptyDir volumes when FSGroup is specified [LinuxOnly] [NodeFeature:FSGroup] new files should be created with FSGroup ownership when container is non-root
Kubernetes e2e suite [It] [sig-storage] EmptyDir volumes when FSGroup is specified [LinuxOnly] [NodeFeature:FSGroup] new files should be created with FSGroup ownership when container is root
Kubernetes e2e suite [It] [sig-storage] EmptyDir volumes when FSGroup is specified [LinuxOnly] [NodeFeature:FSGroup] nonexistent volume subPath should have the correct mode and owner using FSGroup
Kubernetes e2e suite [It] [sig-storage] EmptyDir volumes when FSGroup is specified [LinuxOnly] [NodeFeature:FSGroup] volume on default medium should have the correct mode using FSGroup
Kubernetes e2e suite [It] [sig-storage] EmptyDir volumes when FSGroup is specified [LinuxOnly] [NodeFeature:FSGroup] volume on tmpfs should have the correct mode using FSGroup
Kubernetes e2e suite [It] [sig-storage] HostPath should give a volume the correct mode [LinuxOnly] [NodeConformance]
Kubernetes e2e suite [It] [sig-storage] HostPath should support r/w [NodeConformance]
Kubernetes e2e suite [It] [sig-storage] HostPath should support subPath [NodeConformance]
Kubernetes e2e suite [It] [sig-storage] Projected combined should project all components that make up the projection API [Projection][NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] Projected configMap Should fail non-optional pod creation due to configMap object does not exist [Slow]
Kubernetes e2e suite [It] [sig-storage] Projected configMap Should fail non-optional pod creation due to the key in the configMap object does not exist [Slow]
Kubernetes e2e suite [It] [sig-storage] Projected configMap optional updates should be reflected in volume [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] Projected configMap should be consumable from pods in volume [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] Projected configMap should be consumable from pods in volume as non-root [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] Projected configMap should be consumable from pods in volume as non-root with FSGroup [LinuxOnly] [NodeFeature:FSGroup]
Kubernetes e2e suite [It] [sig-storage] Projected configMap should be consumable from pods in volume as non-root with defaultMode and fsGroup set [LinuxOnly] [NodeFeature:FSGroup]
Kubernetes e2e suite [It] [sig-storage] Projected configMap should be consumable from pods in volume with defaultMode set [LinuxOnly] [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] Projected configMap should be consumable from pods in volume with mappings [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] Projected configMap should be consumable from pods in volume with mappings and Item mode set [LinuxOnly] [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] Projected configMap should be consumable from pods in volume with mappings as non-root [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] Projected configMap should be consumable from pods in volume with mappings as non-root with FSGroup [LinuxOnly] [NodeFeature:FSGroup]
Kubernetes e2e suite [It] [sig-storage] Projected configMap should be consumable in multiple volumes in the same pod [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] Projected configMap updates should be reflected in volume [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] Projected downwardAPI should provide container's cpu limit [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] Projected downwardAPI should provide container's cpu request [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] Projected downwardAPI should provide container's memory limit [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] Projected downwardAPI should provide container's memory request [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] Projected downwardAPI should provide node allocatable (cpu) as default cpu limit if the limit is not set [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] Projected downwardAPI should provide node allocatable (memory) as default memory limit if the limit is not set [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] Projected downwardAPI should provide podname as non-root with fsgroup [LinuxOnly] [NodeFeature:FSGroup]
Kubernetes e2e suite [It] [sig-storage] Projected downwardAPI should provide podname as non-root with fsgroup and defaultMode [LinuxOnly] [NodeFeature:FSGroup]
Kubernetes e2e suite [It] [sig-storage] Projected downwardAPI should provide podname only [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] Projected downwardAPI should set DefaultMode on files [LinuxOnly] [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] Projected downwardAPI should set mode on item file [LinuxOnly] [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] Projected downwardAPI should update annotations on modification [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] Projected downwardAPI should update labels on modification [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] Projected secret Should fail non-optional pod creation due to secret object does not exist [Slow]
Kubernetes e2e suite [It] [sig-storage] Projected secret Should fail non-optional pod creation due to the key in the secret object does not exist [Slow]
Kubernetes e2e suite [It] [sig-storage] Projected secret optional updates should be reflected in volume [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] Projected secret should be able to mount in a volume regardless of a different secret existing with same name in different namespace [NodeConformance]
Kubernetes e2e suite [It] [sig-storage] Projected secret should be consumable from pods in volume [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] Projected secret should be consumable from pods in volume as non-root with defaultMode and fsGroup set [LinuxOnly] [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] Projected secret should be consumable from pods in volume with defaultMode set [LinuxOnly] [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] Projected secret should be consumable from pods in volume with mappings [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] Projected secret should be consumable from pods in volume with mappings and Item Mode set [LinuxOnly] [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] Projected secret should be consumable in multiple volumes in a pod [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] Secrets Should fail non-optional pod creation due to secret object does not exist [Slow]
Kubernetes e2e suite [It] [sig-storage] Secrets Should fail non-optional pod creation due to the key in the secret object does not exist [Slow]
Kubernetes e2e suite [It] [sig-storage] Secrets optional updates should be reflected in volume [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] Secrets should be able to mount in a volume regardless of a different secret existing with same name in different namespace [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] Secrets should be consumable from pods in volume [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] Secrets should be consumable from pods in volume as non-root with defaultMode and fsGroup set [LinuxOnly] [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] Secrets should be consumable from pods in volume with defaultMode set [LinuxOnly] [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] Secrets should be consumable from pods in volume with mappings [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] Secrets should be consumable from pods in volume with mappings and Item Mode set [LinuxOnly] [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] Secrets should be consumable in multiple volumes in a pod [NodeConformance] [Conformance]
Kubernetes e2e suite [It] [sig-storage] Secrets should be immutable if `immutable` field is set [Conformance]
Kubernetes e2e suite [It] [sig-storage] Volumes NFSv3 should be mountable for NFSv3
Kubernetes e2e suite [It] [sig-storage] Volumes NFSv4 should be mountable for NFSv4