This job view page is being replaced by Spyglass soon. Check out the new job view.
ResultFAILURE
Tests 1 failed / 15 succeeded
Started2020-10-14 12:21
Elapsed35m42s
Revisionmaster
job-versionv1.20.0-alpha.2.85+8647eece9c7fe1
revisionv1.20.0-alpha.2.85+8647eece9c7fe1

Test Failures


12m59s

error during /home/prow/go/src/sigs.k8s.io/gcp-compute-persistent-disk-csi-driver/test/run-windows-k8s-integration.sh: exit status 255
				from junit_runner.xml

Filter through log files | View test history on testgrid


Show 15 Passed Tests

Error lines from build-log.txt

... skipping 366 lines ...
Trying to find master named 'e2e-60e5496b02-9cdc3-master'
Looking for address 'e2e-60e5496b02-9cdc3-master-ip'
Using master: e2e-60e5496b02-9cdc3-master (external IP: 34.82.60.15; internal IP: (not set))
Waiting up to 300 seconds for cluster initialization.

  This will continually check to see if the API for kubernetes is reachable.
  This may time out if there was some uncaught error during start up.

...............Kubernetes cluster created.
Cluster "k8s-jkns-e2e-gke-ubuntu-slow_e2e-60e5496b02-9cdc3" set.
User "k8s-jkns-e2e-gke-ubuntu-slow_e2e-60e5496b02-9cdc3" set.
Context "k8s-jkns-e2e-gke-ubuntu-slow_e2e-60e5496b02-9cdc3" created.
Switched to context "k8s-jkns-e2e-gke-ubuntu-slow_e2e-60e5496b02-9cdc3".
... skipping 36 lines ...
e2e-60e5496b02-9cdc3-windows-node-group-5gt6   Ready                      <none>   20s     v1.20.0-alpha.2.85+8647eece9c7fe1
e2e-60e5496b02-9cdc3-windows-node-group-ckjp   Ready                      <none>   11s     v1.20.0-alpha.2.85+8647eece9c7fe1
e2e-60e5496b02-9cdc3-windows-node-group-g460   Ready                      <none>   13s     v1.20.0-alpha.2.85+8647eece9c7fe1
Warning: v1 ComponentStatus is deprecated in v1.19+
Validate output:
Warning: v1 ComponentStatus is deprecated in v1.19+
NAME                 STATUS    MESSAGE             ERROR
etcd-1               Healthy   {"health":"true"}   
controller-manager   Healthy   ok                  
scheduler            Healthy   ok                  
etcd-0               Healthy   {"health":"true"}   
Cluster validation succeeded
Done, listing cluster services:
... skipping 538 lines ...
gcloud docker -- push gcr.io/k8s-jkns-e2e-gke-ubuntu-slow/gcp-persistent-disk-csi-driver:c29b6f90-30bd-4c46-8e57-5bfbdf7dc521
WARNING: `gcloud docker` will not be supported for Docker client versions above 18.03.

As an alternative, use `gcloud auth configure-docker` to configure `docker` to
use `gcloud` as a credential helper, then use `docker` as you would for non-GCR
registries, e.g. `docker pull gcr.io/project-id/my-image`. Add
`--verbosity=error` to silence this warning: `gcloud docker
--verbosity=error -- pull gcr.io/project-id/my-image`.

See: https://cloud.google.com/container-registry/docs/support/deprecation-notices#gcloud-docker

The push refers to repository [gcr.io/k8s-jkns-e2e-gke-ubuntu-slow/gcp-persistent-disk-csi-driver]
ee36bfa80d35: Preparing
9e6931a5a469: Preparing
... skipping 8 lines ...
Building and Pushing GCP Container for Windows
[make -C /home/prow/go/src/sigs.k8s.io/gcp-compute-persistent-disk-csi-driver build-and-push-windows-container-ltsc2019 GCE_PD_CSI_STAGING_VERSION=c29b6f90-30bd-4c46-8e57-5bfbdf7dc521 GCE_PD_CSI_STAGING_IMAGE=gcr.io/k8s-jkns-e2e-gke-ubuntu-slow/gcp-persistent-disk-csi-driver-win]
make: Entering directory '/home/prow/go/src/sigs.k8s.io/gcp-compute-persistent-disk-csi-driver'
# Ensure we use a builder that can leverage it (the default on linux will not)
DOCKER_CLI_EXPERIMENTAL=enabled docker buildx rm windows-builder
no builder "windows-builder" found
make: [Makefile:69: init-buildx] Error 1 (ignored)
DOCKER_CLI_EXPERIMENTAL=enabled docker buildx create --use --name=windows-builder
windows-builder
# Register gcloud as a Docker credential helper.
# Required for "docker buildx build --push".
gcloud auth configure-docker --quiet
Adding credentials for all GCR repositories.
... skipping 214 lines ...
#13 pushing layers
#13 pushing layers 14.1s done
#13 pushing manifest for gcr.io/k8s-jkns-e2e-gke-ubuntu-slow/gcp-persistent-disk-csi-driver-win:c29b6f90-30bd-4c46-8e57-5bfbdf7dc521
#13 pushing manifest for gcr.io/k8s-jkns-e2e-gke-ubuntu-slow/gcp-persistent-disk-csi-driver-win:c29b6f90-30bd-4c46-8e57-5bfbdf7dc521 0.4s done
#13 DONE 21.9s
make: Leaving directory '/home/prow/go/src/sigs.k8s.io/gcp-compute-persistent-disk-csi-driver'
F1014 12:45:16.911079   13395 main.go:161] Failed to run integration test: failed to download Kubernetes source: failed to untar /tmp/gcp-pd-driver-tmp243274349/kubernetes-master.tar.gz: tar: This does not look like a tar archive

gzip: stdin: not in gzip format
tar: Child returned status 1
tar: Error is not recoverable: exiting now
, err: exit status 2
2020/10/14 12:45:16 process.go:155: Step '/home/prow/go/src/sigs.k8s.io/gcp-compute-persistent-disk-csi-driver/test/run-windows-k8s-integration.sh' finished in 12m59.841959235s
2020/10/14 12:45:16 e2e.go:534: Dumping logs locally to: /logs/artifacts
2020/10/14 12:45:16 process.go:153: Running: ./cluster/log-dump/log-dump.sh /logs/artifacts
Checking for custom logdump instances, if any
Sourcing kube-util.sh
... skipping 11 lines ...
Specify --start=57049 in the next get-serial-port-output invocation to get only the new output starting from here.
scp: /var/log/cluster-autoscaler.log*: No such file or directory
scp: /var/log/konnectivity-server.log*: No such file or directory
scp: /var/log/fluentd.log*: No such file or directory
scp: /var/log/kubelet.cov*: No such file or directory
scp: /var/log/startupscript.log*: No such file or directory
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].
Dumping logs from nodes locally to '/logs/artifacts'
Detecting nodes in the cluster
Warning: Permanently added 'compute.7738306565793075339' (ECDSA) to the list of known hosts.
prow@34.83.97.206: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.ssh) [/usr/bin/ssh] exited with return code [255].
Warning: Permanently added 'compute.3345425242488787083' (ECDSA) to the list of known hosts.
Warning: Permanently added 'compute.9076771306127184011' (ECDSA) to the list of known hosts.
prow@34.105.105.194: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.ssh) [/usr/bin/ssh] exited with return code [255].
prow@35.233.238.108: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.ssh) [/usr/bin/ssh] exited with return code [255].
prow@34.83.97.206: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.ssh) [/usr/bin/ssh] exited with return code [255].
prow@34.105.105.194: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.ssh) [/usr/bin/ssh] exited with return code [255].
prow@35.233.238.108: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.ssh) [/usr/bin/ssh] exited with return code [255].
prow@34.83.97.206: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.ssh) [/usr/bin/ssh] exited with return code [255].
prow@34.105.105.194: Permission denied (publickey,keyboard-interactive).
prow@35.233.238.108: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.ssh) [/usr/bin/ssh] exited with return code [255].
ERROR: (gcloud.compute.ssh) [/usr/bin/ssh] exited with return code [255].
prow@34.83.97.206: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.ssh) [/usr/bin/ssh] exited with return code [255].
prow@35.233.238.108: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.ssh) [/usr/bin/ssh] exited with return code [255].
prow@34.105.105.194: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.ssh) [/usr/bin/ssh] exited with return code [255].
Changing logfiles to be world-readable for download
Changing logfiles to be world-readable for download
Copying 'kube-proxy.log fluentd.log node-problem-detector.log kubelet.cov startupscript.log' from e2e-60e5496b02-9cdc3-minion-group-ccr9
Copying 'kube-proxy.log fluentd.log node-problem-detector.log kubelet.cov startupscript.log' from e2e-60e5496b02-9cdc3-minion-group-7vbt

Specify --start=68175 in the next get-serial-port-output invocation to get only the new output starting from here.

Specify --start=68252 in the next get-serial-port-output invocation to get only the new output starting from here.
scp: /var/log/fluentd.log*: No such file or directory
scp: /var/log/node-problem-detector.log*: No such file or directory
scp: /var/log/kubelet.cov*: No such file or directory
scp: /var/log/startupscript.log*: No such file or directory
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].
scp: /var/log/fluentd.log*: No such file or directory
scp: /var/log/node-problem-detector.log*: No such file or directory
scp: /var/log/kubelet.cov*: No such file or directory
scp: /var/log/startupscript.log*: No such file or directory
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].
prow@34.83.97.206: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.ssh) [/usr/bin/ssh] exited with return code [255].
prow@35.233.238.108: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.ssh) [/usr/bin/ssh] exited with return code [255].
prow@34.105.105.194: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.ssh) [/usr/bin/ssh] exited with return code [255].
prow@34.83.97.206: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.ssh) [/usr/bin/ssh] exited with return code [255].
prow@34.105.105.194: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.ssh) [/usr/bin/ssh] exited with return code [255].
prow@35.233.238.108: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.ssh) [/usr/bin/ssh] exited with return code [255].
prow@34.83.97.206: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].
prow@34.105.105.194: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].
prow@35.233.238.108: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].
prow@34.83.97.206: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].
prow@34.105.105.194: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].
prow@35.233.238.108: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].
prow@34.83.97.206: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].
prow@35.233.238.108: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].
prow@34.105.105.194: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].
prow@34.83.97.206: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].
prow@35.233.238.108: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].
prow@34.105.105.194: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].
prow@34.83.97.206: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].
prow@35.233.238.108: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].
prow@34.105.105.194: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].
prow@34.83.97.206: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].
prow@35.233.238.108: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].
prow@34.105.105.194: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].

Specify --start=186116 in the next get-serial-port-output invocation to get only the new output starting from here.

Specify --start=186115 in the next get-serial-port-output invocation to get only the new output starting from here.

Specify --start=186177 in the next get-serial-port-output invocation to get only the new output starting from here.
... skipping 77 lines ...
Listed 0 items.
Listed 0 items.
2020/10/14 12:56:22 process.go:155: Step './cluster/gce/list-resources.sh' finished in 15.235638047s
2020/10/14 12:56:22 process.go:153: Running: diff -sw -U0 -F^\[.*\]$ /logs/artifacts/gcp-resources-before.txt /logs/artifacts/gcp-resources-after.txt
2020/10/14 12:56:22 process.go:155: Step 'diff -sw -U0 -F^\[.*\]$ /logs/artifacts/gcp-resources-before.txt /logs/artifacts/gcp-resources-after.txt' finished in 8.566875ms
2020/10/14 12:56:22 process.go:96: Saved XML output to /logs/artifacts/junit_runner.xml.
2020/10/14 12:56:22 main.go:312: Something went wrong: encountered 1 errors: [error during /home/prow/go/src/sigs.k8s.io/gcp-compute-persistent-disk-csi-driver/test/run-windows-k8s-integration.sh: exit status 255]
Traceback (most recent call last):
  File "/workspace/scenarios/kubernetes_e2e.py", line 720, in <module>
    main(parse_args())
  File "/workspace/scenarios/kubernetes_e2e.py", line 570, in main
    mode.start(runner_args)
  File "/workspace/scenarios/kubernetes_e2e.py", line 228, in start
... skipping 16 lines ...