This job view page is being replaced by Spyglass soon. Check out the new job view.
ResultFAILURE
Tests 1 failed / 15 succeeded
Started2020-10-15 00:49
Elapsed1h0m
Revisionmaster
job-versionv1.20.0-alpha.2.93+6718c7654d29fa
revisionv1.20.0-alpha.2.93+6718c7654d29fa

Test Failures


38m18s

error during /home/prow/go/src/sigs.k8s.io/gcp-compute-persistent-disk-csi-driver/test/run-windows-k8s-integration.sh: exit status 255
				from junit_runner.xml

Filter through log files | View test history on testgrid


Show 15 Passed Tests

Error lines from build-log.txt

... skipping 367 lines ...
Trying to find master named 'e2e-83b8fcfe21-24e2a-master'
Looking for address 'e2e-83b8fcfe21-24e2a-master-ip'
Using master: e2e-83b8fcfe21-24e2a-master (external IP: 104.198.2.126; internal IP: (not set))
Waiting up to 300 seconds for cluster initialization.

  This will continually check to see if the API for kubernetes is reachable.
  This may time out if there was some uncaught error during start up.

..........Kubernetes cluster created.
Cluster "gce-gci-upg-1-4-1-5-ctl-skew_e2e-83b8fcfe21-24e2a" set.
User "gce-gci-upg-1-4-1-5-ctl-skew_e2e-83b8fcfe21-24e2a" set.
Context "gce-gci-upg-1-4-1-5-ctl-skew_e2e-83b8fcfe21-24e2a" created.
Switched to context "gce-gci-upg-1-4-1-5-ctl-skew_e2e-83b8fcfe21-24e2a".
... skipping 37 lines ...
e2e-83b8fcfe21-24e2a-windows-node-group-3sx1   Ready                      <none>   19s     v1.20.0-alpha.2.93+6718c7654d29fa
e2e-83b8fcfe21-24e2a-windows-node-group-j83z   Ready                      <none>   14s     v1.20.0-alpha.2.93+6718c7654d29fa
e2e-83b8fcfe21-24e2a-windows-node-group-vxfx   Ready                      <none>   18s     v1.20.0-alpha.2.93+6718c7654d29fa
Warning: v1 ComponentStatus is deprecated in v1.19+
Validate output:
Warning: v1 ComponentStatus is deprecated in v1.19+
NAME                 STATUS    MESSAGE             ERROR
controller-manager   Healthy   ok                  
etcd-1               Healthy   {"health":"true"}   
scheduler            Healthy   ok                  
etcd-0               Healthy   {"health":"true"}   
Cluster validation succeeded
Done, listing cluster services:
... skipping 538 lines ...
gcloud docker -- push gcr.io/gce-gci-upg-1-4-1-5-ctl-skew/gcp-persistent-disk-csi-driver:1842b787-31b8-4099-b0cb-8dc6d67fd125
WARNING: `gcloud docker` will not be supported for Docker client versions above 18.03.

As an alternative, use `gcloud auth configure-docker` to configure `docker` to
use `gcloud` as a credential helper, then use `docker` as you would for non-GCR
registries, e.g. `docker pull gcr.io/project-id/my-image`. Add
`--verbosity=error` to silence this warning: `gcloud docker
--verbosity=error -- pull gcr.io/project-id/my-image`.

See: https://cloud.google.com/container-registry/docs/support/deprecation-notices#gcloud-docker

The push refers to repository [gcr.io/gce-gci-upg-1-4-1-5-ctl-skew/gcp-persistent-disk-csi-driver]
126ba4fbfbd6: Preparing
a240b790d114: Preparing
... skipping 8 lines ...
Building and Pushing GCP Container for Windows
[make -C /home/prow/go/src/sigs.k8s.io/gcp-compute-persistent-disk-csi-driver build-and-push-windows-container-ltsc2019 GCE_PD_CSI_STAGING_VERSION=1842b787-31b8-4099-b0cb-8dc6d67fd125 GCE_PD_CSI_STAGING_IMAGE=gcr.io/gce-gci-upg-1-4-1-5-ctl-skew/gcp-persistent-disk-csi-driver-win]
make: Entering directory '/home/prow/go/src/sigs.k8s.io/gcp-compute-persistent-disk-csi-driver'
# Ensure we use a builder that can leverage it (the default on linux will not)
DOCKER_CLI_EXPERIMENTAL=enabled docker buildx rm windows-builder
no builder "windows-builder" found
make: [Makefile:69: init-buildx] Error 1 (ignored)
DOCKER_CLI_EXPERIMENTAL=enabled docker buildx create --use --name=windows-builder
windows-builder
# Register gcloud as a Docker credential helper.
# Required for "docker buildx build --push".
gcloud auth configure-docker --quiet
Adding credentials for all GCR repositories.
... skipping 236 lines ...
PKGDIR is /home/prow/go/src/sigs.k8s.io/gcp-compute-persistent-disk-csi-driver
+ /home/prow/go/src/sigs.k8s.io/gcp-compute-persistent-disk-csi-driver/deploy/kubernetes/install-kustomize.sh
installing kustomize
{Version:kustomize/v3.8.0 GitCommit:6a50372dd5686df22750b0c729adaf369fbf193c BuildDate:2020-07-05T14:08:42Z GoOs:linux GoArch:amd64}
+ '[' true '!=' true -a alpha '!=' noauth ']'
+ kubectl get namespace gce-pd-csi-driver -v=2
F1015 01:20:51.428196   64350 helpers.go:115] Error from server (NotFound): namespaces "gce-pd-csi-driver" not found
goroutine 1 [running]:
k8s.io/kubernetes/vendor/k8s.io/klog/v2.stacks(0xc00012a001, 0xc0008664e0, 0x75, 0xc6)
	/workspace/anago-v1.20.0-alpha.1.381+ee297b6f4d78da/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/vendor/k8s.io/klog/v2/klog.go:996 +0xb9
k8s.io/kubernetes/vendor/k8s.io/klog/v2.(*loggingT).output(0x2d08a20, 0xc000000003, 0x0, 0x0, 0xc0007c0cb0, 0x2adc933, 0xa, 0x73, 0x40b200)
	/workspace/anago-v1.20.0-alpha.1.381+ee297b6f4d78da/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/vendor/k8s.io/klog/v2/klog.go:945 +0x191
k8s.io/kubernetes/vendor/k8s.io/klog/v2.(*loggingT).printDepth(0x2d08a20, 0x3, 0x0, 0x0, 0x2, 0xc0001c7ad0, 0x1, 0x1)
	/workspace/anago-v1.20.0-alpha.1.381+ee297b6f4d78da/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/vendor/k8s.io/klog/v2/klog.go:718 +0x165
k8s.io/kubernetes/vendor/k8s.io/klog/v2.FatalDepth(...)
	/workspace/anago-v1.20.0-alpha.1.381+ee297b6f4d78da/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/vendor/k8s.io/klog/v2/klog.go:1442
k8s.io/kubernetes/vendor/k8s.io/kubectl/pkg/cmd/util.fatal(0xc000520230, 0x46, 0x1)
	/workspace/anago-v1.20.0-alpha.1.381+ee297b6f4d78da/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/vendor/k8s.io/kubectl/pkg/cmd/util/helpers.go:93 +0x1f0
k8s.io/kubernetes/vendor/k8s.io/kubectl/pkg/cmd/util.checkErr(0x1e56e20, 0xc0009c3a20, 0x1d01168)
	/workspace/anago-v1.20.0-alpha.1.381+ee297b6f4d78da/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/vendor/k8s.io/kubectl/pkg/cmd/util/helpers.go:188 +0x945
k8s.io/kubernetes/vendor/k8s.io/kubectl/pkg/cmd/util.CheckErr(...)
	/workspace/anago-v1.20.0-alpha.1.381+ee297b6f4d78da/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/vendor/k8s.io/kubectl/pkg/cmd/util/helpers.go:115
k8s.io/kubernetes/vendor/k8s.io/kubectl/pkg/cmd/get.NewCmdGet.func1(0xc00036f600, 0xc000453cb0, 0x2, 0x3)
... skipping 65 lines ...
created by k8s.io/kubernetes/vendor/golang.org/x/net/http2.(*Transport).newClientConn
	/workspace/anago-v1.20.0-alpha.1.381+ee297b6f4d78da/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/vendor/golang.org/x/net/http2/transport.go:695 +0x66e
+ kubectl create namespace gce-pd-csi-driver -v=2
namespace/gce-pd-csi-driver created
+ '[' alpha '!=' noauth ']'
+ kubectl get secret cloud-sa -v=2 -n gce-pd-csi-driver
F1015 01:20:52.178487   64371 helpers.go:115] Error from server (NotFound): secrets "cloud-sa" not found
goroutine 1 [running]:
k8s.io/kubernetes/vendor/k8s.io/klog/v2.stacks(0xc00013c001, 0xc000bea180, 0x69, 0xba)
	/workspace/anago-v1.20.0-alpha.1.381+ee297b6f4d78da/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/vendor/k8s.io/klog/v2/klog.go:996 +0xb9
k8s.io/kubernetes/vendor/k8s.io/klog/v2.(*loggingT).output(0x2d08a20, 0xc000000003, 0x0, 0x0, 0xc00058c2a0, 0x2adc933, 0xa, 0x73, 0x40b200)
	/workspace/anago-v1.20.0-alpha.1.381+ee297b6f4d78da/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/vendor/k8s.io/klog/v2/klog.go:945 +0x191
k8s.io/kubernetes/vendor/k8s.io/klog/v2.(*loggingT).printDepth(0x2d08a20, 0x3, 0x0, 0x0, 0x2, 0xc000a9bad0, 0x1, 0x1)
	/workspace/anago-v1.20.0-alpha.1.381+ee297b6f4d78da/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/vendor/k8s.io/klog/v2/klog.go:718 +0x165
k8s.io/kubernetes/vendor/k8s.io/klog/v2.FatalDepth(...)
	/workspace/anago-v1.20.0-alpha.1.381+ee297b6f4d78da/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/vendor/k8s.io/klog/v2/klog.go:1442
k8s.io/kubernetes/vendor/k8s.io/kubectl/pkg/cmd/util.fatal(0xc00039eb80, 0x3a, 0x1)
	/workspace/anago-v1.20.0-alpha.1.381+ee297b6f4d78da/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/vendor/k8s.io/kubectl/pkg/cmd/util/helpers.go:93 +0x1f0
k8s.io/kubernetes/vendor/k8s.io/kubectl/pkg/cmd/util.checkErr(0x1e56e20, 0xc0009ddf20, 0x1d01168)
	/workspace/anago-v1.20.0-alpha.1.381+ee297b6f4d78da/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/vendor/k8s.io/kubectl/pkg/cmd/util/helpers.go:188 +0x945
k8s.io/kubernetes/vendor/k8s.io/kubectl/pkg/cmd/util.CheckErr(...)
	/workspace/anago-v1.20.0-alpha.1.381+ee297b6f4d78da/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/vendor/k8s.io/kubectl/pkg/cmd/util/helpers.go:115
k8s.io/kubernetes/vendor/k8s.io/kubectl/pkg/cmd/get.NewCmdGet.func1(0xc000521600, 0xc0007aa460, 0x2, 0x5)
... skipping 64 lines ...
	/workspace/anago-v1.20.0-alpha.1.381+ee297b6f4d78da/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/vendor/golang.org/x/net/http2/transport.go:1716 +0x6f
created by k8s.io/kubernetes/vendor/golang.org/x/net/http2.(*Transport).newClientConn
	/workspace/anago-v1.20.0-alpha.1.381+ee297b6f4d78da/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/vendor/golang.org/x/net/http2/transport.go:695 +0x66e
+ kubectl create secret generic cloud-sa -v=2 --from-file=/tmp/gcp-pd-driver-tmp589607921/cloud-sa.json -n gce-pd-csi-driver
secret/cloud-sa created
+ kubectl get clusterrolebinding -v=2 cluster-admin-binding
F1015 01:20:53.097737   64387 helpers.go:115] Error from server (NotFound): clusterrolebindings.rbac.authorization.k8s.io "cluster-admin-binding" not found
goroutine 1 [running]:
k8s.io/kubernetes/vendor/k8s.io/klog/v2.stacks(0xc00000e001, 0xc00019e1e0, 0x9c, 0xed)
	/workspace/anago-v1.20.0-alpha.1.381+ee297b6f4d78da/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/vendor/k8s.io/klog/v2/klog.go:996 +0xb9
k8s.io/kubernetes/vendor/k8s.io/klog/v2.(*loggingT).output(0x2d08a20, 0xc000000003, 0x0, 0x0, 0xc00061cbd0, 0x2adc933, 0xa, 0x73, 0x40b200)
	/workspace/anago-v1.20.0-alpha.1.381+ee297b6f4d78da/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/vendor/k8s.io/klog/v2/klog.go:945 +0x191
k8s.io/kubernetes/vendor/k8s.io/klog/v2.(*loggingT).printDepth(0x2d08a20, 0x3, 0x0, 0x0, 0x2, 0xc0009d3ad0, 0x1, 0x1)
	/workspace/anago-v1.20.0-alpha.1.381+ee297b6f4d78da/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/vendor/k8s.io/klog/v2/klog.go:718 +0x165
k8s.io/kubernetes/vendor/k8s.io/klog/v2.FatalDepth(...)
	/workspace/anago-v1.20.0-alpha.1.381+ee297b6f4d78da/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/vendor/k8s.io/klog/v2/klog.go:1442
k8s.io/kubernetes/vendor/k8s.io/kubectl/pkg/cmd/util.fatal(0xc0004a1340, 0x6d, 0x1)
	/workspace/anago-v1.20.0-alpha.1.381+ee297b6f4d78da/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/vendor/k8s.io/kubectl/pkg/cmd/util/helpers.go:93 +0x1f0
k8s.io/kubernetes/vendor/k8s.io/kubectl/pkg/cmd/util.checkErr(0x1e56e20, 0xc000304860, 0x1d01168)
	/workspace/anago-v1.20.0-alpha.1.381+ee297b6f4d78da/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/vendor/k8s.io/kubectl/pkg/cmd/util/helpers.go:188 +0x945
k8s.io/kubernetes/vendor/k8s.io/kubectl/pkg/cmd/util.CheckErr(...)
	/workspace/anago-v1.20.0-alpha.1.381+ee297b6f4d78da/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/vendor/k8s.io/kubectl/pkg/cmd/util/helpers.go:115
k8s.io/kubernetes/vendor/k8s.io/kubectl/pkg/cmd/get.NewCmdGet.func1(0xc0004af600, 0xc0003d3d70, 0x2, 0x3)
... skipping 944 lines ...
daemonset.apps "csi-gce-pd-node-win" deleted
Warning: storage.k8s.io/v1beta1 CSIDriver is deprecated in v1.19+, unavailable in v1.22+; use storage.k8s.io/v1 CSIDriver
csidriver.storage.k8s.io "pd.csi.storage.gke.io" deleted
NAME                STATUS   AGE
gce-pd-csi-driver   Active   16m
namespace "gce-pd-csi-driver" deleted
F1015 01:38:37.719745   13476 main.go:161] Failed to run integration test: failed to install CSI Driver: Windows deployment failed to come up: exit status 255
2020/10/15 01:38:37 process.go:155: Step '/home/prow/go/src/sigs.k8s.io/gcp-compute-persistent-disk-csi-driver/test/run-windows-k8s-integration.sh' finished in 38m18.522498113s
2020/10/15 01:38:37 e2e.go:534: Dumping logs locally to: /logs/artifacts
2020/10/15 01:38:37 process.go:153: Running: ./cluster/log-dump/log-dump.sh /logs/artifacts
Checking for custom logdump instances, if any
Sourcing kube-util.sh
Detecting project
... skipping 10 lines ...
Specify --start=57036 in the next get-serial-port-output invocation to get only the new output starting from here.
scp: /var/log/cluster-autoscaler.log*: No such file or directory
scp: /var/log/konnectivity-server.log*: No such file or directory
scp: /var/log/fluentd.log*: No such file or directory
scp: /var/log/kubelet.cov*: No such file or directory
scp: /var/log/startupscript.log*: No such file or directory
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].
Dumping logs from nodes locally to '/logs/artifacts'
Detecting nodes in the cluster
Warning: Permanently added 'compute.4194190129699103558' (ECDSA) to the list of known hosts.
Warning: Permanently added 'compute.4003607260951094086' (ECDSA) to the list of known hosts.
prow@35.233.246.12: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.ssh) [/usr/bin/ssh] exited with return code [255].
Warning: Permanently added 'compute.1795196087358333766' (ECDSA) to the list of known hosts.
prow@34.83.43.56: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.ssh) [/usr/bin/ssh] exited with return code [255].
prow@35.233.246.12: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.ssh) [/usr/bin/ssh] exited with return code [255].
prow@34.83.43.56: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.ssh) [/usr/bin/ssh] exited with return code [255].
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].
prow@35.233.246.12: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.ssh) [/usr/bin/ssh] exited with return code [255].
prow@34.83.43.56: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.ssh) [/usr/bin/ssh] exited with return code [255].
prow@104.198.14.179: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].
prow@35.233.246.12: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.ssh) [/usr/bin/ssh] exited with return code [255].
prow@34.83.43.56: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.ssh) [/usr/bin/ssh] exited with return code [255].
Changing logfiles to be world-readable for download
Changing logfiles to be world-readable for download
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].
Copying 'kube-proxy.log fluentd.log node-problem-detector.log kubelet.cov startupscript.log' from e2e-83b8fcfe21-24e2a-minion-group-b3xb
Copying 'kube-proxy.log fluentd.log node-problem-detector.log kubelet.cov startupscript.log' from e2e-83b8fcfe21-24e2a-minion-group-tl72

Specify --start=68372 in the next get-serial-port-output invocation to get only the new output starting from here.

Specify --start=67866 in the next get-serial-port-output invocation to get only the new output starting from here.
scp: /var/log/fluentd.log*: No such file or directory
scp: /var/log/node-problem-detector.log*: No such file or directory
scp: /var/log/kubelet.cov*: No such file or directory
scp: /var/log/startupscript.log*: No such file or directory
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].
scp: /var/log/fluentd.log*: No such file or directory
scp: /var/log/node-problem-detector.log*: No such file or directory
scp: /var/log/kubelet.cov*: No such file or directory
scp: /var/log/startupscript.log*: No such file or directory
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].
prow@35.233.246.12: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].
prow@34.83.43.56: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].
prow@35.233.246.12: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].

Specify --start=186389 in the next get-serial-port-output invocation to get only the new output starting from here.
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].

Specify --start=186537 in the next get-serial-port-output invocation to get only the new output starting from here.

Specify --start=186335 in the next get-serial-port-output invocation to get only the new output starting from here.
INSTANCE_GROUPS=e2e-83b8fcfe21-24e2a-minion-group
NODE_NAMES=e2e-83b8fcfe21-24e2a-minion-group-b3xb e2e-83b8fcfe21-24e2a-minion-group-tl72
... skipping 75 lines ...
Listed 0 items.
Listed 0 items.
2020/10/15 01:49:34 process.go:155: Step './cluster/gce/list-resources.sh' finished in 15.281391236s
2020/10/15 01:49:34 process.go:153: Running: diff -sw -U0 -F^\[.*\]$ /logs/artifacts/gcp-resources-before.txt /logs/artifacts/gcp-resources-after.txt
2020/10/15 01:49:34 process.go:155: Step 'diff -sw -U0 -F^\[.*\]$ /logs/artifacts/gcp-resources-before.txt /logs/artifacts/gcp-resources-after.txt' finished in 1.432382ms
2020/10/15 01:49:34 process.go:96: Saved XML output to /logs/artifacts/junit_runner.xml.
2020/10/15 01:49:34 main.go:312: Something went wrong: encountered 1 errors: [error during /home/prow/go/src/sigs.k8s.io/gcp-compute-persistent-disk-csi-driver/test/run-windows-k8s-integration.sh: exit status 255]
Traceback (most recent call last):
  File "/workspace/scenarios/kubernetes_e2e.py", line 720, in <module>
    main(parse_args())
  File "/workspace/scenarios/kubernetes_e2e.py", line 570, in main
    mode.start(runner_args)
  File "/workspace/scenarios/kubernetes_e2e.py", line 228, in start
... skipping 16 lines ...