This job view page is being replaced by Spyglass soon. Check out the new job view.
ResultFAILURE
Tests 1 failed / 15 succeeded
Started2020-10-14 08:46
Elapsed1h20m
Revisionmaster
job-versionv1.20.0-alpha.2.85+8647eece9c7fe1
revisionv1.20.0-alpha.2.85+8647eece9c7fe1

Test Failures


51m38s

error during /home/prow/go/src/sigs.k8s.io/gcp-compute-persistent-disk-csi-driver/test/run-windows-k8s-integration.sh: exit status 255
				from junit_runner.xml

Filter through log files | View test history on testgrid


Show 15 Passed Tests

Error lines from build-log.txt

... skipping 369 lines ...
Trying to find master named 'e2e-2e9e355f48-24e2a-master'
Looking for address 'e2e-2e9e355f48-24e2a-master-ip'
Using master: e2e-2e9e355f48-24e2a-master (external IP: 34.83.80.143; internal IP: (not set))
Waiting up to 300 seconds for cluster initialization.

  This will continually check to see if the API for kubernetes is reachable.
  This may time out if there was some uncaught error during start up.

Kubernetes cluster created.
Cluster "k8s-jkns-gce-ubuntu-1-6-slow_e2e-2e9e355f48-24e2a" set.
User "k8s-jkns-gce-ubuntu-1-6-slow_e2e-2e9e355f48-24e2a" set.
Context "k8s-jkns-gce-ubuntu-1-6-slow_e2e-2e9e355f48-24e2a" created.
Switched to context "k8s-jkns-gce-ubuntu-1-6-slow_e2e-2e9e355f48-24e2a".
... skipping 41 lines ...
e2e-2e9e355f48-24e2a-windows-node-group-d75c   Ready                      <none>   15s     v1.20.0-alpha.2.85+8647eece9c7fe1
e2e-2e9e355f48-24e2a-windows-node-group-g545   Ready                      <none>   73s     v1.20.0-alpha.2.85+8647eece9c7fe1
e2e-2e9e355f48-24e2a-windows-node-group-mqmx   Ready                      <none>   68s     v1.20.0-alpha.2.85+8647eece9c7fe1
Warning: v1 ComponentStatus is deprecated in v1.19+
Validate output:
Warning: v1 ComponentStatus is deprecated in v1.19+
NAME                 STATUS    MESSAGE             ERROR
controller-manager   Healthy   ok                  
etcd-1               Healthy   {"health":"true"}   
scheduler            Healthy   ok                  
etcd-0               Healthy   {"health":"true"}   
Cluster validation succeeded
Done, listing cluster services:
... skipping 541 lines ...
gcloud docker -- push gcr.io/k8s-jkns-gce-ubuntu-1-6-slow/gcp-persistent-disk-csi-driver:32d10e95-a436-4b44-963e-611db18a5984
WARNING: `gcloud docker` will not be supported for Docker client versions above 18.03.

As an alternative, use `gcloud auth configure-docker` to configure `docker` to
use `gcloud` as a credential helper, then use `docker` as you would for non-GCR
registries, e.g. `docker pull gcr.io/project-id/my-image`. Add
`--verbosity=error` to silence this warning: `gcloud docker
--verbosity=error -- pull gcr.io/project-id/my-image`.

See: https://cloud.google.com/container-registry/docs/support/deprecation-notices#gcloud-docker

The push refers to repository [gcr.io/k8s-jkns-gce-ubuntu-1-6-slow/gcp-persistent-disk-csi-driver]
82c62395a686: Preparing
48e4b7a09440: Preparing
... skipping 8 lines ...
Building and Pushing GCP Container for Windows
[make -C /home/prow/go/src/sigs.k8s.io/gcp-compute-persistent-disk-csi-driver build-and-push-windows-container-ltsc2019 GCE_PD_CSI_STAGING_VERSION=32d10e95-a436-4b44-963e-611db18a5984 GCE_PD_CSI_STAGING_IMAGE=gcr.io/k8s-jkns-gce-ubuntu-1-6-slow/gcp-persistent-disk-csi-driver-win]
make: Entering directory '/home/prow/go/src/sigs.k8s.io/gcp-compute-persistent-disk-csi-driver'
# Ensure we use a builder that can leverage it (the default on linux will not)
DOCKER_CLI_EXPERIMENTAL=enabled docker buildx rm windows-builder
no builder "windows-builder" found
make: [Makefile:69: init-buildx] Error 1 (ignored)
DOCKER_CLI_EXPERIMENTAL=enabled docker buildx create --use --name=windows-builder
windows-builder
# Register gcloud as a Docker credential helper.
# Required for "docker buildx build --push".
gcloud auth configure-docker --quiet
Adding credentials for all GCR repositories.
... skipping 249 lines ...
PKGDIR is /home/prow/go/src/sigs.k8s.io/gcp-compute-persistent-disk-csi-driver
+ /home/prow/go/src/sigs.k8s.io/gcp-compute-persistent-disk-csi-driver/deploy/kubernetes/install-kustomize.sh
installing kustomize
{Version:kustomize/v3.8.0 GitCommit:6a50372dd5686df22750b0c729adaf369fbf193c BuildDate:2020-07-05T14:08:42Z GoOs:linux GoArch:amd64}
+ '[' true '!=' true -a alpha '!=' noauth ']'
+ kubectl get namespace gce-pd-csi-driver -v=2
F1014 09:34:34.060745   64613 helpers.go:115] Error from server (NotFound): namespaces "gce-pd-csi-driver" not found
goroutine 1 [running]:
k8s.io/kubernetes/vendor/k8s.io/klog/v2.stacks(0xc00000e001, 0xc00031c410, 0x75, 0xc6)
	/workspace/anago-v1.19.2-rc.0.12+19706d90d87784/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/vendor/k8s.io/klog/v2/klog.go:996 +0xb9
k8s.io/kubernetes/vendor/k8s.io/klog/v2.(*loggingT).output(0x2d11ca0, 0xc000000003, 0x0, 0x0, 0xc00045ae00, 0x2ae6619, 0xa, 0x73, 0x40b200)
	/workspace/anago-v1.19.2-rc.0.12+19706d90d87784/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/vendor/k8s.io/klog/v2/klog.go:945 +0x191
k8s.io/kubernetes/vendor/k8s.io/klog/v2.(*loggingT).printDepth(0x2d11ca0, 0x3, 0x0, 0x0, 0x2, 0xc000b29ad0, 0x1, 0x1)
	/workspace/anago-v1.19.2-rc.0.12+19706d90d87784/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/vendor/k8s.io/klog/v2/klog.go:718 +0x165
k8s.io/kubernetes/vendor/k8s.io/klog/v2.FatalDepth(...)
	/workspace/anago-v1.19.2-rc.0.12+19706d90d87784/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/vendor/k8s.io/klog/v2/klog.go:1442
k8s.io/kubernetes/vendor/k8s.io/kubectl/pkg/cmd/util.fatal(0xc00057c230, 0x46, 0x1)
	/workspace/anago-v1.19.2-rc.0.12+19706d90d87784/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/vendor/k8s.io/kubectl/pkg/cmd/util/helpers.go:93 +0x1f0
k8s.io/kubernetes/vendor/k8s.io/kubectl/pkg/cmd/util.checkErr(0x1e5c660, 0xc00000d5a0, 0x1d05b48)
	/workspace/anago-v1.19.2-rc.0.12+19706d90d87784/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/vendor/k8s.io/kubectl/pkg/cmd/util/helpers.go:188 +0x945
k8s.io/kubernetes/vendor/k8s.io/kubectl/pkg/cmd/util.CheckErr(...)
	/workspace/anago-v1.19.2-rc.0.12+19706d90d87784/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/vendor/k8s.io/kubectl/pkg/cmd/util/helpers.go:115
k8s.io/kubernetes/vendor/k8s.io/kubectl/pkg/cmd/get.NewCmdGet.func1(0xc00046f600, 0xc000202b70, 0x2, 0x3)
... skipping 65 lines ...
created by k8s.io/kubernetes/vendor/golang.org/x/net/http2.(*Transport).newClientConn
	/workspace/anago-v1.19.2-rc.0.12+19706d90d87784/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/vendor/golang.org/x/net/http2/transport.go:695 +0x66e
+ kubectl create namespace gce-pd-csi-driver -v=2
namespace/gce-pd-csi-driver created
+ '[' alpha '!=' noauth ']'
+ kubectl get secret cloud-sa -v=2 -n gce-pd-csi-driver
F1014 09:34:34.779757   64633 helpers.go:115] Error from server (NotFound): secrets "cloud-sa" not found
goroutine 1 [running]:
k8s.io/kubernetes/vendor/k8s.io/klog/v2.stacks(0xc0000d4001, 0xc0002b0480, 0x69, 0xba)
	/workspace/anago-v1.19.2-rc.0.12+19706d90d87784/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/vendor/k8s.io/klog/v2/klog.go:996 +0xb9
k8s.io/kubernetes/vendor/k8s.io/klog/v2.(*loggingT).output(0x2d11ca0, 0xc000000003, 0x0, 0x0, 0xc000345030, 0x2ae6619, 0xa, 0x73, 0x40b200)
	/workspace/anago-v1.19.2-rc.0.12+19706d90d87784/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/vendor/k8s.io/klog/v2/klog.go:945 +0x191
k8s.io/kubernetes/vendor/k8s.io/klog/v2.(*loggingT).printDepth(0x2d11ca0, 0x3, 0x0, 0x0, 0x2, 0xc000a69ad0, 0x1, 0x1)
	/workspace/anago-v1.19.2-rc.0.12+19706d90d87784/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/vendor/k8s.io/klog/v2/klog.go:718 +0x165
k8s.io/kubernetes/vendor/k8s.io/klog/v2.FatalDepth(...)
	/workspace/anago-v1.19.2-rc.0.12+19706d90d87784/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/vendor/k8s.io/klog/v2/klog.go:1442
k8s.io/kubernetes/vendor/k8s.io/kubectl/pkg/cmd/util.fatal(0xc0005e5240, 0x3a, 0x1)
	/workspace/anago-v1.19.2-rc.0.12+19706d90d87784/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/vendor/k8s.io/kubectl/pkg/cmd/util/helpers.go:93 +0x1f0
k8s.io/kubernetes/vendor/k8s.io/kubectl/pkg/cmd/util.checkErr(0x1e5c660, 0xc0005cfcc0, 0x1d05b48)
	/workspace/anago-v1.19.2-rc.0.12+19706d90d87784/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/vendor/k8s.io/kubectl/pkg/cmd/util/helpers.go:188 +0x945
k8s.io/kubernetes/vendor/k8s.io/kubectl/pkg/cmd/util.CheckErr(...)
	/workspace/anago-v1.19.2-rc.0.12+19706d90d87784/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/vendor/k8s.io/kubectl/pkg/cmd/util/helpers.go:115
k8s.io/kubernetes/vendor/k8s.io/kubectl/pkg/cmd/get.NewCmdGet.func1(0xc0003ad600, 0xc0000e85a0, 0x2, 0x5)
... skipping 64 lines ...
	/workspace/anago-v1.19.2-rc.0.12+19706d90d87784/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/vendor/golang.org/x/net/http2/transport.go:1716 +0x6f
created by k8s.io/kubernetes/vendor/golang.org/x/net/http2.(*Transport).newClientConn
	/workspace/anago-v1.19.2-rc.0.12+19706d90d87784/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/vendor/golang.org/x/net/http2/transport.go:695 +0x66e
+ kubectl create secret generic cloud-sa -v=2 --from-file=/tmp/gcp-pd-driver-tmp074015632/cloud-sa.json -n gce-pd-csi-driver
secret/cloud-sa created
+ kubectl get clusterrolebinding -v=2 cluster-admin-binding
F1014 09:34:35.512224   64654 helpers.go:115] Error from server (NotFound): clusterrolebindings.rbac.authorization.k8s.io "cluster-admin-binding" not found
goroutine 1 [running]:
k8s.io/kubernetes/vendor/k8s.io/klog/v2.stacks(0xc00000e001, 0xc0000221e0, 0x9c, 0xed)
	/workspace/anago-v1.19.2-rc.0.12+19706d90d87784/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/vendor/k8s.io/klog/v2/klog.go:996 +0xb9
k8s.io/kubernetes/vendor/k8s.io/klog/v2.(*loggingT).output(0x2d11ca0, 0xc000000003, 0x0, 0x0, 0xc000135110, 0x2ae6619, 0xa, 0x73, 0x40b200)
	/workspace/anago-v1.19.2-rc.0.12+19706d90d87784/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/vendor/k8s.io/klog/v2/klog.go:945 +0x191
k8s.io/kubernetes/vendor/k8s.io/klog/v2.(*loggingT).printDepth(0x2d11ca0, 0x3, 0x0, 0x0, 0x2, 0xc000c09ad0, 0x1, 0x1)
	/workspace/anago-v1.19.2-rc.0.12+19706d90d87784/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/vendor/k8s.io/klog/v2/klog.go:718 +0x165
k8s.io/kubernetes/vendor/k8s.io/klog/v2.FatalDepth(...)
	/workspace/anago-v1.19.2-rc.0.12+19706d90d87784/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/vendor/k8s.io/klog/v2/klog.go:1442
k8s.io/kubernetes/vendor/k8s.io/kubectl/pkg/cmd/util.fatal(0xc000770f50, 0x6d, 0x1)
	/workspace/anago-v1.19.2-rc.0.12+19706d90d87784/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/vendor/k8s.io/kubectl/pkg/cmd/util/helpers.go:93 +0x1f0
k8s.io/kubernetes/vendor/k8s.io/kubectl/pkg/cmd/util.checkErr(0x1e5c660, 0xc0007d9fa0, 0x1d05b48)
	/workspace/anago-v1.19.2-rc.0.12+19706d90d87784/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/vendor/k8s.io/kubectl/pkg/cmd/util/helpers.go:188 +0x945
k8s.io/kubernetes/vendor/k8s.io/kubectl/pkg/cmd/util.CheckErr(...)
	/workspace/anago-v1.19.2-rc.0.12+19706d90d87784/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/vendor/k8s.io/kubectl/pkg/cmd/util/helpers.go:115
k8s.io/kubernetes/vendor/k8s.io/kubectl/pkg/cmd/get.NewCmdGet.func1(0xc0003eb600, 0xc0001d87e0, 0x2, 0x3)
... skipping 928 lines ...
daemonset.apps "csi-gce-pd-node-win" deleted
Warning: storage.k8s.io/v1beta1 CSIDriver is deprecated in v1.19+, unavailable in v1.22+; use storage.k8s.io/v1 CSIDriver
csidriver.storage.k8s.io "pd.csi.storage.gke.io" deleted
NAME                STATUS   AGE
gce-pd-csi-driver   Active   17m
namespace "gce-pd-csi-driver" deleted
F1014 09:52:50.752991   13697 main.go:161] Failed to run integration test: failed to install CSI Driver: Windows deployment failed to come up: exit status 255
2020/10/14 09:52:50 process.go:155: Step '/home/prow/go/src/sigs.k8s.io/gcp-compute-persistent-disk-csi-driver/test/run-windows-k8s-integration.sh' finished in 51m38.062611978s
2020/10/14 09:52:50 e2e.go:534: Dumping logs locally to: /logs/artifacts
2020/10/14 09:52:50 process.go:153: Running: ./cluster/log-dump/log-dump.sh /logs/artifacts
Checking for custom logdump instances, if any
Sourcing kube-util.sh
Detecting project
... skipping 10 lines ...
Specify --start=56955 in the next get-serial-port-output invocation to get only the new output starting from here.
scp: /var/log/cluster-autoscaler.log*: No such file or directory
scp: /var/log/konnectivity-server.log*: No such file or directory
scp: /var/log/fluentd.log*: No such file or directory
scp: /var/log/kubelet.cov*: No such file or directory
scp: /var/log/startupscript.log*: No such file or directory
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].
Dumping logs from nodes locally to '/logs/artifacts'
Detecting nodes in the cluster
Warning: Permanently added 'compute.6308063648563266157' (ECDSA) to the list of known hosts.
Warning: Permanently added 'compute.57566462447649389' (ECDSA) to the list of known hosts.
Warning: Permanently added 'compute.633174135461839469' (ECDSA) to the list of known hosts.
prow@34.82.80.157: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.ssh) [/usr/bin/ssh] exited with return code [255].
prow@35.227.189.234: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.ssh) [/usr/bin/ssh] exited with return code [255].
prow@34.82.80.157: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.ssh) [/usr/bin/ssh] exited with return code [255].
prow@35.227.189.234: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.ssh) [/usr/bin/ssh] exited with return code [255].
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].
prow@34.82.80.157: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.ssh) [/usr/bin/ssh] exited with return code [255].
prow@35.227.189.234: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.ssh) [/usr/bin/ssh] exited with return code [255].
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].
prow@34.82.80.157: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.ssh) [/usr/bin/ssh] exited with return code [255].
prow@35.227.189.234: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.ssh) [/usr/bin/ssh] exited with return code [255].
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].
prow@34.82.80.157: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.ssh) [/usr/bin/ssh] exited with return code [255].
prow@35.227.189.234: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.ssh) [/usr/bin/ssh] exited with return code [255].
Changing logfiles to be world-readable for download
Changing logfiles to be world-readable for download
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].
Copying 'kube-proxy.log fluentd.log node-problem-detector.log kubelet.cov startupscript.log' from e2e-2e9e355f48-24e2a-minion-group-1p71
prow@34.82.80.157: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.ssh) [/usr/bin/ssh] exited with return code [255].
Copying 'kube-proxy.log fluentd.log node-problem-detector.log kubelet.cov startupscript.log' from e2e-2e9e355f48-24e2a-minion-group-d520
prow@35.227.189.234: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.ssh) [/usr/bin/ssh] exited with return code [255].

Specify --start=68080 in the next get-serial-port-output invocation to get only the new output starting from here.

Specify --start=68348 in the next get-serial-port-output invocation to get only the new output starting from here.
scp: /var/log/fluentd.log*: No such file or directory
scp: /var/log/node-problem-detector.log*: No such file or directory
scp: /var/log/kubelet.cov*: No such file or directory
scp: /var/log/startupscript.log*: No such file or directory
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].
scp: /var/log/fluentd.log*: No such file or directory
scp: /var/log/node-problem-detector.log*: No such file or directory
scp: /var/log/kubelet.cov*: No such file or directory
scp: /var/log/startupscript.log*: No such file or directory
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].
prow@34.83.252.154: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].
prow@34.82.80.157: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].
prow@34.82.80.157: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].
prow@35.227.189.234: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].

Specify --start=186305 in the next get-serial-port-output invocation to get only the new output starting from here.
prow@34.82.80.157: Permission denied (publickey,keyboard-interactive).
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].
ERROR: (gcloud.compute.scp) [/usr/bin/scp] exited with return code [1].

Specify --start=186367 in the next get-serial-port-output invocation to get only the new output starting from here.

Specify --start=186073 in the next get-serial-port-output invocation to get only the new output starting from here.
INSTANCE_GROUPS=e2e-2e9e355f48-24e2a-minion-group
NODE_NAMES=e2e-2e9e355f48-24e2a-minion-group-1p71 e2e-2e9e355f48-24e2a-minion-group-d520
... skipping 75 lines ...
Listed 0 items.
Listed 0 items.
2020/10/14 10:06:34 process.go:155: Step './cluster/gce/list-resources.sh' finished in 27.554482884s
2020/10/14 10:06:34 process.go:153: Running: diff -sw -U0 -F^\[.*\]$ /logs/artifacts/gcp-resources-before.txt /logs/artifacts/gcp-resources-after.txt
2020/10/14 10:06:34 process.go:155: Step 'diff -sw -U0 -F^\[.*\]$ /logs/artifacts/gcp-resources-before.txt /logs/artifacts/gcp-resources-after.txt' finished in 1.883892ms
2020/10/14 10:06:34 process.go:96: Saved XML output to /logs/artifacts/junit_runner.xml.
2020/10/14 10:06:34 main.go:312: Something went wrong: encountered 1 errors: [error during /home/prow/go/src/sigs.k8s.io/gcp-compute-persistent-disk-csi-driver/test/run-windows-k8s-integration.sh: exit status 255]
Traceback (most recent call last):
  File "/workspace/scenarios/kubernetes_e2e.py", line 720, in <module>
    main(parse_args())
  File "/workspace/scenarios/kubernetes_e2e.py", line 570, in main
    mode.start(runner_args)
  File "/workspace/scenarios/kubernetes_e2e.py", line 228, in start
... skipping 16 lines ...